Autocar Xpert

Autocar, LLC (Autocar) is recalling certain 2012-2016 Xpert, 2010-2020 Xspotter, 2008-2020 Xpeditor, 2008-2010 WXLL and WX vehicles. A worn parking brake control valve can leak air into the vent line, creating excessive back pressure and causing the parking brake to release unexpectedly.

Autocar Industries, LLC (Autocar Industries) is recalling certain 2016 Xpert, and Xspotter vehicles, equipped with certain Dana Spicer D-Series and E-Series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.

Autocar Industries, LLC (Autocar) is recalling certain model year 2015-2017 Xspotter and Xpert vehicles manufactured March 2, 2015, to September 22, 2016. The castle nuts on the steering linkage assembly may not have been tightened properly.

Autocar Industries, LLC (Autocar) is recalling certain model year 2016-2017 Auto Xspotter and 2017 Autocar Xpert vehicles manufactured March 04, 2016, through April 21, 2016. The tab lock washers on the rear axle wheel ends may not have been properly bent over the outer spindle nut during assembly.

Autocar Industries, LLC (Autocar) is recalling certain model year 2014-2016 Xpert and XSpotter vehicles manufactured September 24, 2013, to April 22, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2015 Xpert trucks manufactured November 30, 2011, to November 5, 2014 and having a 164-inch wheelbase and a sweeper body which is mounted with a gap between the cab and the body (where optional equipment could be installed). When being driven at speeds above 25mph, the affected vehicles may have an unexpected bounce.

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. The bolts that secure the steering column mounting bracket could be below the required torque and possibly cause the steering column to come loose.

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. The bolts securing the brake valve to the cab may be below the required torque which could cause a failure in the connection of the airlines and the brake valve. Thus, the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. During manufacturing, the floor mat may have been captured between the seat brackets and the cab sheet metal at all four connection points. This could cause the torque on the bolts to relax to below the required torque, allowing them to loosen. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems."

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. The bolts used to anchor the seat belts may be insufficiently tight to withstand the forces experienced in certain crashes. As such, these vehicles do not conform to Federal Motor Vehicles Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."

Autocar Industries, LLC, (Autocar) is recalling certain model year 2014 Xpert trucks manufactured November 7, 2013, through January 13, 2014, and equipped with certain Cummins Westport Model ISL G or ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.

Autocar Industries, LLC is recalling certain model year 2012 Xpert vehicles manufactured October 17, 2011, through September 17, 2012; and with serial numbers in the range 213522 through 215336. The seat belt anchorages fail to sustain the 3000 pound forces for the specified length of time. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."