Problems owners report
Complaints filed with NHTSA about the 2022 BMW S 1000 RR, by the system named in each complaint. One complaint can name several.
- Engine3
- Electrical system1
- Fuel/propulsion system1
- Unknown or other1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 1 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fatal crashes in the US
From 2020 to 2023, 14 2022 S 1000 RR vehicles were involved in crashes on US public roads in which someone died; 13 people died inside them. This is a count, not a crash rate: it grows with the number of cars on the road.
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)
Recalls
BMW of North America, LLC (BMW) is recalling certain 2024 S 1000 RR US, and 2020-2026 S 1000 RR motorcycles. The vibration of the motorcycle may cause an internal component of the ignition lock to fail, which can cause the instrument display, rear lighting, and other systems such as ABS to fail, or cause an engine stall while riding.
BMW of North America, LLC (BMW) is recalling certain 2022 S1000RR, M1000RR, and 2022-2023 S1000XR and S1000R motorcycles. The clutch cover bolts were not lubricated properly, which may cause the clutch cover to become loose and leak oil.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What BMW told its dealers about the 2022 BMW S 1000 RR: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10249027 | The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints. |
| 10245430 | On the above listed vehicles, lubricant residue can be found on the fork cap on the right side telescoping fork. Vehicles with caps 31 42 1 754 557 and 31 42 1 757 701 can show this residue. These are not leaks at the cap, but assembly grease residue. Forks with this apparent leak have been received and leak testing was performed. NO leaks could be detected. |
| 10242928 | Front and rear wheel speed sensor faults (0x3A1800 and 0x3A1801) appear after the bike is being revvedover 5000 RPM while still on the side stand, sometimes in conjunction with the side stand fault 0X3A1331. When the engine is revved up while on the side stand, vibrations are sent through the entire motorcycle.This vibration intensity varies from bike to bike. This vibration can cause particular movement between the wheel speed sensor and the sensor ringsdepending on the position of the sensor to the ring. The movement is picked up as rotation speed and iscalled ghost speed. This ghost speed |
| 10242927 | During the production of the intake camshaft there was a change in the coolant used to prevent localized overheating of parts of the camshaft. Because of this, certain parts of the camshaft may have a changed surface hardness that can result in increased wear of the rocker arms and camshaft over time. |
| 10242536 | Vehicle goes into emergency operation mode and a warning light illuminates on the instrument cluster. |
| 10240498 | CHECK ROCKER ARMS AND REPLACE WHERE NEEDED. |
| 10224220 | At continuous rotational speeds exceeding 10,000 rpm, the spring inside the timing chain tensioner may break. The broken pieces can migrate into the oil sump and may then reach the camshaft bearings, resulting in damage to the valve gear. |
NHTSA manufacturer communications (public domain)