Problems owners report
Complaints filed with NHTSA about the 2011 Chevrolet Avalanche 1500, by the system named in each complaint. One complaint can name several.
- Unknown or other11
- Air bags11
- Structure4
- Electrical system4
- Power train3
- Electronic stability control (esc)3
- Engine3
- Vehicle speed control2
- Engine and engine cooling1
- Service brakes, hydraulic1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Recalls
11V007000 · Suspension6 Jan 2011 · 30,566 vehicles
GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2011 CADILLAC ESCALADE, ESCALADE ESV, ESCALADE EXT; CHEVROLET AVALANCHE, COLORADO, EXPRESS, SILVERADO, SUBURBAN, TAHOE; AND GMC CANYON, SIERRA, SAVANA, YUKON AND YUKON XL VEHICLES. THE REAR AXLE CROSS PINS WERE NOT PROPERLY HEAT TREATED AND COULD FRACTURE AND BECOME DISPLACED WITHIN THE REAR AXLE. SHOULD THE PIN SHIFT OUT OF POSITION, IT COULD CREATE AN INTERFERENCE CONDITION AND CAUSE THE REAR AXLE TO LOCK.
10V643000 · Suspension17 Dec 2010 · 1,262 vehicles
GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2011 CADILLAC ESCALADE EXT, CHEVROLET AVALANCHE, SILVERADO LD AND GMC SIERRA LD VEHICLES. THE REAR AXLE CROSS PINS WERE NOT PROPERLY HEAT TREATED AND COULD FRACTURE AND BECOME DISPLACED WITHIN THE REAR AXLE. SHOULD THE PIN SHIFT OUT OF POSITION, IT COULD CREATE AN INTERFERENCE CONDITION AND CAUSE THE REAR AXLE TO LOCK.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Chevrolet told its dealers about the 2011 Chevrolet Avalanche 1500: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011805 | This Preliminary information communicates a GM part number forreflective high temperature heat or insulating tape when repairing wiring harnesses. |
| 11011782 | This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel. |
| 11011709 | This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. |
| 11011205 | This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules. |
| 11010545 | This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S). |
| 11010544 | This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil. |
| 11010491 | This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs. |
| 11010490 | This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption. |
| 11010421 | This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements. |
| 11009764 | This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories. |
| 11009756 | This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management. |
| 11009532 | This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive. |
| 11009531 | This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive. |
| 11009156 | This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update. |
| 11009088 | This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped. |
| 11009039 | This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). |
| 11008956 | This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only). |
| 11008906 | This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. |
| 11008898 | The bulletin provides direction on how to locate the Temporary Service Part (TSP) form in GlobalConnect. |
| 11007936 | This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak. |
| 11007935 | This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak. |
| 11007744 | This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature. |
| 11007743 | This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature. |
| 11007208 | This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection. |
| 11007196 | This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. |
NHTSA manufacturer communications (public domain)