Problems owners report
Complaints filed with NHTSA about the 2023 Dodge DURANGO1, by the system named in each complaint. One complaint can name several.
- Electrical system2
- Fuel system, gasoline1
- Service brakes1
- Unknown or other1
- Engine1
- Exterior lighting1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported
Recalls
23V115000 · Structure23 Feb 2023 · 139,019 vehicles
Chrysler (FCA US, LLC) is recalling certain 2021-2023 Dodge Durango vehicles. The rear spoiler may not be aligned properly with the roof, resulting in damage to the spoiler during liftgate use.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Dodge told its dealers about the 2023 Dodge DURANGO1: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10251854 | Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. |
| 10251848 | Navigation (NAV) Reboot When MOTA Fails The customer may describe one of more of the following: ? Radio navigation continues to reboot after a Map Update (MOTA). ? Navigation regularly cuts out and back on again. ? Radio switches to navigation without customer's input. This bulletin involves updating the Navigation maps via USB. |
| 10251814 | Emission Recall 83A Sales Code Alignment |
| 10251787 | Rattle Buzz Noise From Door Area |
| 10251783 | Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On |
| 10251767 | Thermostat Assy For 2022-2024MY 3.6L Pentastar Upgrade with P0128 failure code. PRIOR TO PERFORMING ANY THERMOSTAT REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2309000014 |
| 10248966 | PSU Oil Pump Assy |
| 10248957 | Engine Misfire From Intake Manifold Crack Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: ? P0301 - Cylinder 1 Misfire. Customers may also experience one or more of the following: ? Rough engine idle. ? Shakes while driving. This bulletin involves inspecting and if needed replacing the intake manifold for a crack. |
| 10248945 | Pitch and Roll are not Displayed on SRT Performance Pages Customers may experience: Pitch and Roll are not displayed in the SRT Performance Pages Fig. 1. This bulletin involves using wiTECH to perform a Restore Vehicle Configuration. |
| 10248877 | Verifying Camshaft Diagnosis |
| 10248872 | Audio Muted During A CarPlay Or Android Auto Phone Call |
| 10248859 | Malfunction Indicator Lamp (MIL) Illuminated. Active Diagnostic Trouble Code (DTC) P1DB7-00 ? Torque Converter Clutch Performance, Set. |
| 10248850 | COOLER Engine Oil Please be aware that the oil cooler seal is serviceable as a standalone part and should be considered for replacement as a remedy for fluid leak. |
| 10248848 | Spring Front Upr - Isolator Before replacing this part. Please contact FCA REDACTED CONTENT. ~ If no response in 15 minutes, proceed with repair. |
| 10248845 | Hydraulic tensioner Before replacing any Front End Accessory Drive components, please check Accessory Drive belt routing as per engine sales code. Customer complaints may include a noise coming from under de hood described as a squeal, screech, squeak, chirp or "belt related" noise and/or noisy tensioner/pulley. Please check Service Library for any STAR Online publications that may apply. Note: If it is found that the pulleys and/or tensioners are to blame for the noise please use an stethoscope or similar tool to determine the origin of the noise and include it in the narrative. |
| 10248842 | Body Control Module For concern related to DTC U0140 - Lost Communication with Body Control Module, please follow published diagnostic information for this DTC to ensure all module connections are secure. Please check all the connections at BCM from other modules that could potentially report a loss of communication with the BCM and ensure that they are fully seated as per diagnostic information. Some affected modules may include : HVAC;LBSS;RBSS;IPC;OCM;ICS;TBM;TCM;MSM;CSWM;ITBM;PCM;PTS/PAM;ESM;RFHUB;DSM;DTCM;IBS;AHLM;ABS;ORC;PLGM;DDM,DMFL;PDM;DMFR;EPS;ACC;FFCM;HVAC_R *Ensure to check all t |
| 10248570 | 2nd Row Center Seat Lazy Or Slow When Folding. |
| 10248556 | Wireless Qi Charger Not Charging |
| 10248509 | Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved. |
| 10248505 | PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnos |
| 10248045 | Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses (Fig. 1) . This bulletin is to communicate the procedure for head lamp condensation clearing. |
| 10247995 | Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| 10247955 | Uconnect Box Require Service Message |
| 10247906 | ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA. |
| 10247905 | ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA. |
NHTSA manufacturer communications (public domain)