Problems owners report
Complaints filed with NHTSA about the 2020 Ford F-59, by the system named in each complaint. One complaint can name several.
- Suspension5
- Power train2
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Recalls
Ford Motor Company (Ford) is recalling certain 2020-2022 F-59 vehicles. The bolt that secures the intermediate steering shaft to the steering gear box may be improperly tightened, which could result in separation of the intermediate steering shaft from the steering gear box.
Ford Motor Company (Ford) is recalling certain 2020-2021 F-53 Motorhome Stripped Chassis and F-59 Commercial Stripped Chassis vehicles. An inadequate amount of rear axle lubricant may cause rear wheel bearing damage and bearing seizure, and rear axle or driveshaft failure.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Ford told its dealers about the 2020 Ford F-59: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10252410 | Customer Satisfaction Program 22N15 Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Adding Not OTA Capable Owner letters. Other documents submitted 01/02/24 & Received OTA letters submitted on 02/01/24 |
| 10249489 | Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Addinf owner letters. First part submitted 01/02/24 |
| 10248066 | Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing |
| 10240743 | The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information. |
| 10233726 | Some 2020-2021 F53/F59 Stripped Chassis vehicles may experience an illuminated anti-lock brake system (ABS) warning indicator with diagnostic trouble code (DTC) C0037 and/or C003A. If normal diagnostics lead to replacement of the tone ring, be advised that the tone ring has been superseded with improved parts for both the passive (MU9Z-2C026-D, open shutter design) and active (MU9Z-2C026-C, closed shutter design) systems. Follow Workshop Manual, Section 206-04 for tone ring replacement. |
| 10216963 | Some 2020-2022 Escape/Corsair/F-53 Motorhome/F-59 Commercial Stripped Chassis, 2021-2023 F-650/F-750/E-Series, and 2021-2022 Bronco Sport vehicles may exhibit a communication fault with emissions inspection equipment. This may be due to the software in the gateway module (GWM). To correct this condition, reprogram the GWM to latest software level using the appropriate Ford diagnostic scan tool. Use causal part 14F642 and applicable labor times from Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| 10208152 | Some 2020-2022 F-53 Motorhome Chassis/F-59 Commercial Stripped Chassis vehicles may exhibit an illuminated anti-lock brake system (ABS) warning with diagnostic trouble code (DTC) C0037 and/or C0038. This may be due to a damaged rear wheel speed sensor (WSS) ring. Minimal damage may cause DTCs and can be difficult to detect during visual inspection. If replacement is required, closely inspect the service part to ensure no damage is present and follow Workshop Manual, Section 206-09 to replace. Removal of the ABS sensor is required to avoid damage to a new ring when servicing. Use a suitable jac |
NHTSA manufacturer communications (public domain)