Problems owners report
Complaints filed with NHTSA about the 2012 Hyundai Equus, by the system named in each complaint. One complaint can name several.
- Power train4
- Engine3
- Suspension2
- Electrical system1
- Air bags1
- Electronic stability control (esc)1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 1 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
New York safety inspections
At its first New York inspection the 2012 Hyundai Equus failed the safety check 0.63% of the time — 75% less often than the average 2012 passenger car (2.52%). Median odometer at inspection: 89,987 miles.
160first inspections
0.63%failed on safety
89,987 mimedian odometer
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Crash-test ratings
NHTSA 5-star results for 1 variant; not yet fully rated. Rollover risk is the estimated chance of rolling over in a single-vehicle crash.
| Variant | Overall | Rollover risk |
|---|---|---|
| 2012 Hyundai Equus 4 DR RWD | — | 0.0 % |
- Electronic stability control
- Standard
- Forward collision warning
- No
- Lane departure warning
- No
- Best overall rating
- —
NHTSA New Car Assessment Program (5-Star Safety Ratings), api.nhtsa.gov · US federal work, public domain
Fuel consumption
Official Canadian test results for 1 variant: combined 13.0 L/100 km (about 18 mpg US), CO₂ 299 g/km.
| Variant | City | Highway | Combined |
|---|---|---|---|
| Equus · Full-size · Premium gasoline | 15.3 | 10.2 | 13.0 |
Litres per 100 km. Natural Resources Canada, Fuel consumption ratings (open.canada.ca) · Open Government Licence – Canada
Recalls in Canada
2 Transport Canada recalls for the 2012 Hyundai Equus.
| 2023125 8 Mar 2023 | Brakes Issue: Hyundai is conducting a special service campaign that provides anti-corrosion treatment to certain underbody components. Over time, components under th… |
| 2016112 7 Mar 2016 | Electrical On certain vehicles, the cover seal of the windshield wiper motor could degrade over time. This could result in moisture ingress, which could lead to corrosion… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
16V117000 · Visibility29 Feb 2016 · 18,700 vehicles
Hyundai Motor America (Hyundai) is recalling certain model year 2012 Genesis vehicles manufactured August 1, 2011, to April 30, 2012, and 2011-2013 Equus vehicles manufactured July 10, 2011, to June 12, 2012. The windshield wiper motor cover seal on the affected vehicles may degrade allowing corrosion on the wiper motor's circuit board. The corrosion can cause intermittent or total loss of wiper function.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Hyundai told its dealers about the 2012 Hyundai Equus: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10253275 | This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2. |
| 10251285 | This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades. |
| 10247189 | This bulletin provides important checkpoint guidelines when performing engine oil and filter change services. |
| 10235566 | Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint. |
| 10235526 | In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. The service campaign describes the procedure to perform this preventative service on certain 2009-2014MY Genesis Sedan (BH), 2011-2016MY Equus (VI), and 2010-2016MY Genesis Coupe (BK) vehicles. |
| 10235525 | In some areas, a vehicles underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to the bottom exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain Genesis Sedan (BH), Equus (VI), and Genesis Coupe (BK) vehicles. |
| 10230904 | This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation. |
| 10217258 | Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard. |
| 10217251 | Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. |
| 10213727 | The warranty coverage for the hydraulic electronic control unit (HECU) for certain 2009-12 Genesis (BH) and 2011-12 Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners. |
| 10213723 | The warranty coverage for the hydraulic electronic control unit (HECU) for certain Genesis (BH) and Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners. |
| 10210203 | The warranty coverage for the hydraulic electronic control unit (HECU) for certain Genesis (BH) and Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners. |
| 10208866 | The brake fluid specifications labeled on the master cylinder reservoir cap and in the vehicle owners manual require revision to indicate DOT 4 brake fluid only. This bulletin describes the procedure to replace the master cylinder reservoir cap and apply a sticker to the owners manual with the revised brake fluid specification. |
| 10204249 | This bulletin describes the procedure to replace the 35R and 4&OD solenoids for a shift flare and/or harsh shift during the 2~3, 3~4 or 4~5 upshift. |
| 10196577 | The warranty coverage for the clock spring has been extended to 15 years with unlimited mileage from the date of original retail delivery or date of first use, whichever occurs first. This warranty coverage applies to both the original and subsequent owners. Refer to the warranty and service parts information outlined in this bulletin whenever clock spring replacement is required. |
| 10190044 | This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps. |
| 10190038 | This bulletin provides best practice recommendations when performing brake service procedures. |
| 10189989 | This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. |
| 10183963 | This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area. |
| 10183960 | This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin. |
| 10178175 | This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation. |
| 10176182 | This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. |
| 10176178 | This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products. |
| 10174808 | This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days. |
| 10174807 | The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: |
NHTSA manufacturer communications (public domain)