11,145,731 US VINs16,875,657 Dutch plates3,603,918 businesses in 233 countries
English
AfrikaansAzərbaycancaBahasa IndonesiaBahasa MelayuCatalàČeštinaDanskDeutschEestiEnglishEspañolFilipinoFrançaisGaeilgeHrvatskiÍslenskaItalianoKiswahiliLatviešuLietuviųMagyarMaltiNederlandsNorskOʻzbekchaPolskiPortuguês (Brasil)Português (Portugal)RomânăShqipSlovenčinaSlovenščinaSrpskiSuomiSvenskaTiếng ViệtTürkçeΕλληνικάБеларускаяБългарскиКыргызчаҚазақшаМакедонскиМонголРусскийУкраїнськаქართულიՀայերենעבריתاردوالعربيةفارسیनेपालीहिन्दीবাংলাதமிழ்සිංහලไทยລາວမြန်မာខ្មែរ한국어日本語简体中文繁體中文
Check a VIN

2021 Hyundai Ioniq Hybrid

13 owner complaints — #6 of 6 Ioniq Hybrid model years. 0 recalls, 16 service bulletins.

13complaints · 0 crashes, 0 fires
0recalls
16manufacturer bulletins
17,500 mimedian mileage at failure

Problems owners report

Complaints filed with NHTSA about the 2021 Hyundai Ioniq Hybrid, by the system named in each complaint. One complaint can name several.

  • Electrical system7
  • Forward collision avoidance3
  • Unknown or other3
  • Service brakes3
  • Vehicle speed control2
  • Back over prevention1
  • Engine1

NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported

Compared with other years

’17’19’2113’17’20’2113

NHTSA ODI complaints by model year

Recalls

No recall campaigns cover the 2021 Hyundai Ioniq Hybrid.

Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.

NHTSA recalls · summaries in NHTSA's own words

Service bulletins

What Hyundai told its dealers about the 2021 Hyundai Ioniq Hybrid: known faults, fixes and updates.

BulletinSummary
10252364This bulletin provides the procedure to update the ECU software on certain 2021-2022MY IONIQ Plug-in Hybrid (AE PHEV) vehicles that may exhibit a warning light with DTC U1341 due to communication issues with the Integrated Electronic Brake (IEB) during charging in IG3 mode. Follow the procedure in this TSB to update the ECU software logic. DTC Info: U1341 - ECU-IEB Communication Delay
10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
10243318This bulletin provides the procedure to update the Hybrid Control Unit (HCU) / Low DC/DC Converter (LDC) software logic to eliminate internal P-DTCs (that are not viewable) in certain 2019-2021MY IONIQ Hybrid (AE HEV) and 2021MY IONIQ Plug-in Hybrid (AE PHEV) vehicles.
10240087This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundais Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
10235346When servicing any of the specified vehicles below with the corresponding DTCs, C2416, Motor Short or Open LH (EPB) or C2417 Motor Short or Open RH (EPB), follow the step-by-step procedures in this bulletin.
10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
10215599Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
10213725If you are servicing an applicable model with Hybrid Drive Motor (Traction Motor) improper operation or any DTC listed in the related shop manual, Motor Control System, refer to the shop manual for diagnosis. If the diagnosis indicates a faulty hybrid drive motor, refer to the Service Procedure and replace the hybrid drive motor.
10211680Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
10211678Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
10208862Certain IONIQ Hybrid and Plug-in Hybrid (AE HEV/PHEV) vehicles may exhibit a condition with the BlueLink Remote Start feature unsuccessful when using the MyHyundai mobile app or MyHyundai.com owner web portal. This bulletin describes the procedure to update the ECU with improved logic to correct a SMK (Smart key system) software error when attempting to use the BlueLink Remote Start feature.
10203272Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing

NHTSA manufacturer communications (public domain)

NHTSA investigations

DP22005 · Electrical system:propulsion systemopened 27 Jan 2023 · closed 7 Aug 2023

Pedestrian alert sounds

NHTSA Office of Defects Investigation