Problems owners report
Complaints filed with NHTSA about the 1990 Mazda MPV, by the system named in each complaint. One complaint can name several.
- Power train13
- Seat belts7
- Service brakes, hydraulic7
- Engine and engine cooling5
- Suspension5
- Structure3
- Electrical system3
- Visibility3
- Seats1
- Tires1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 5 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Recalls in Canada
3 Transport Canada recalls for the 1990 Mazda MPV.
| 2015489 19 Oct 2015 | Electrical On certain vehicles, a defect in the ignition switch could cause an electrical short to develop over time. This could result in smoke and/or fire, increasing th… |
| 1995085 24 May 1995 | Seats And Restraints THE (Takata) ABS PLASTIC FRONT SEAT BELT RELEASE BUTTONS ON THESE VEHICLES MAY BREAK ALLOWING PLASTIC PIECES TO FALL INTO THE BUCKLE ASSEMBLY. IF THIS SHOULD HA… |
| 1992042 14 Apr 1992 | Brakes ON VEHICLES EQUIPPED WITH ABS, AN INCREASE IN THE BRAKE SHOES' COEFFICIENT OF FRICTION CAN RESULT IN PREMATURE ACTIVATION OF THE ABS SYSTEM. THE NOISE AND BRA… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE REAR BRAKE LININGS CAN CHANGE OVER TIME. AS THE BRAKES WEAR, THE COEFFICIENT OF FRICTION CAN INCREASE, PRODUCING INCONSISTENT REAR BRAKE PERFORMANCE AND PREMATURE ACTIVATION OF THE ABS SYSTEM.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Mazda told its dealers about the 1990 Mazda MPV: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 621310 | SOME VEHICLES MAY EXHIBIT A NO START, ROUGH IDLE AND / OR LACK OF POWER AFTER A 60,000 MILE TIMING BELT REPLACEMENT INTERVAL. *TT |
| 609949 | SUBJECT REGARDING 60,000 MILE SERVICE, INSPECTION AND / OR REPLACEMENT OF THE TENSIONER PULLEY. *TT |
| 603906 | SOME VEHICLES MAY EXPERIENCE HLA NOISE. *YC |
| 603891 | CONDITIONS WITH STEERING WHEEL SLIGHTLY OFF CENTER. *YC |
| 603854 | INFORMATION REGARDING SEAT BELT EXTENDERS. *YC |
| 600148 | CONCERNS WITH HLA NOISE HEARD AFTER A COLD START. *YC |
| 52520 | PARTS REPLACEMENT AFTER AIRBAG DEPLOYMENT. *TW |
| 52503 | MAINTENANCE FREE BATTERY - DIAGNOSTIC AND CHARGING PROCEDURE. *TW |
| 52502 | 1989-90 MPV MICROFICHE CORRECTIONS - O-RING SET - CYLINDER HEAD AND COVER - SWITCHES AND RELAYS. *TW |
| 52497 | USE OF A/C TRACER DYE. *TW |
| 52492 | WIPER MOTOR INOPERATIVE - CIRCUIT BREAKER ACTIVATION. *TW |
| 52487 | REPLACEMENT CONNECTORS FOR ECAT SOLENOID HARNESS. *TW |
| 52481 | FUEL ODOR - GASOLINE SMELL MAY BE ENTERING THE PASSENGER COMPARTMENT. *TW |
| 52469 | POWER STEERING FLUID HOSE COMES OFF. *TW |
| 46704 | CYLINDER HEAD GASKET MODIFICATION. *SD |
| 40067 | THE REAR DEFROSTER SWITCH HARNESS HAS BEEN MODIFIED. *TW |
| 39688 | HARD SHIFT, R-TYPE TRANSMISSION. *TW |
| 10213425 | Speedometer replacement procedure |
| 10153339 | In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle m |
| 10148072 | In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle m |
| 10144333 | In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle m |
| 10118467 | In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle |
| 10098367 | IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO (0) MILES.THIS PROCEDURE IS EXTREMELY IMPORTANT TO ACCURATELY REPRESENT ACTUAL VEHICLE MILEAGE.PRIOR TO SPEEDOMETER REMOVAL, COMPLETE THE INFORMATION REQUIRED ON THE SPEEDOMETER REPLACE-MENT LABEL. LABELS CAN ONLY BE ORDERED THROUGH MSTORE, NOT MDCS. |
| 10009427 | BATTERY TEST PROCEDURE REQUIREMENTS. *TT |
| 10009424 | SPEEDOMETER REPLACEMENT PROCEDURE. *TT |
NHTSA manufacturer communications (public domain)
NHTSA investigations
TAKATA SEAT BELT BUCKLE FAILURE
INCONSIST.BRK PERFORMANCE
INCONSISTENT BRAKE PERFORM
THROTTLE STICKING
NHTSA Office of Defects Investigation