Problems owners report
Complaints filed with NHTSA about the 2001 Mercedes-Benz ML430, by the system named in each complaint. One complaint can name several.
- Service brakes11
- Service brakes, hydraulic11
- Electronic stability control (esc)6
- Electrical system6
- Vehicle speed control6
- Steering5
- Visibility3
- Unknown or other2
- Fuel system, gasoline2
- Power train2
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 2 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Recalls
No recall campaigns cover the 2001 Mercedes-Benz ML430.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Mercedes-Benz told its dealers about the 2001 Mercedes-Benz ML430: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 627184 | SUBJECT REGARDING BUZZING NOISE FROM THE FUEL FILTER. (UP TO AND INCLUDING YEARS LISTED) *JG |
| 621571 | SOME VEHICLES MAY EXHIBIT 1-2 SECOND DELAY UPON RELEASE OF THE BRAKE PEDAL AND / OR APPLICATION OF THE ACCELERATOR PEDAL UNTIL THE ACTUATOR MOVES TO THE NEW ACCELERATOR PEDAL INPUT POSITION. THIS IS A DESIGN CHARACTERISTIC INCORPORATED IN THE ENGINE MANAGEMENT SYSTEM AS A SAFETY FEATURE. THIS IS NOT SUBJECT TO MODIFICATION IN THE FIELD. *TT |
| 11009122 | Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer l |
| 11008091 | Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protrudin |
| 11007974 | Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for cor |
| 11007753 | Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an eng |
| 11005294 | Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the ve |
| 10248162 | Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material! |
| 10181124 | Harsh engagement when changing gear range from P to D or R |
| 10181123 | Harsh engagement when changing gear range from P to D |
| 10167577 | Since 12/2012 (model 166) and since 06/2013 (model 242) the glass breakage loops are no longer in the side windows and rear window. Suitable interior protection ensures that the interior monitoring function continues to operate correctly. |
| 10167564 | Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery replacement. |
| 10167563 | The COMAND unit does not start or the COMAND display remains dark. The COMAND unit cannot be operated. Note: The problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30). |
| 10166990 | Thumping noises from front axle when driving over bumps on road. |
| 10166976 | Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual" |
| 10166975 | This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014. |
| 10135598 | Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "Implausible data were received from the ethanol sensor" |
| 10051989 | MERCEDES: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE LOWER POWER STEERING HOSE AND CLAMP SHOULD BE REPLACE, UNDER EXTENDED WARRANTY, DUE TO POWER STEERING LEAKAGE FROM CONNECTION TO POWER STEERING COOLER. MODELS 1998-2003 163.154, (ML320, 430, 55, 500, 350). *PE |
| 10036933 | XENTRY (MERCEDES BENZ): REPLACING EXTERIOR LIGHT BULBS. EXTERIOR LIGHTS. LI DID NOT MATCH DTB FROM WHICH IT WAS CREATED. (MAIN REMEDY FOR REPAIR WAS MISSING.) *PE |
| 10034306 | MERCEDES: AIRBAG DURABILITY AND RELIABILITY. AIR BAG SRS CONTROL MODULE (N2/2) DOES NOT HAVE A SET SHELF LIFE AND WILL NORMALLY BE RELIABLE FOR THE LIFE OF A VEHICLE. WITH 164, 216 221, 251 AND NEWER, THE AIRBAG CONTROL UNIT CAN BE RESET FIVE TIMES. WITH MODES 202, 210 AND NEWER, THE AIRBAG CONTROL UNIT CAN BE RESET THREE TIMES. EARLIER MODELS WOULD HAVE TO HAVE THEIR AIRBAG CONTROL UNIT AND TRIGGERED RESTRAIN COMPONENTS CHANGED ONLY AFTER AN ACCIDENT. NO MODELS OR MODEL YEARS LISTED. *PE |
| 10034152 | MERCEDES: BATTERY SYMBOL AND SERVICE REQUIRED (IN WHITE). FAULT MESSAGE IS DISPLAYED IF THE CHARGE LEVEL IS TOO LOW OR THE PARK PAWL ADDITIONAL BATTERY IS DEFECTIVE. IN ADDITION FAULT CODE FC 9061 AND/OR FC 9062 IS STORED IN THE FRONT SAM. *PE |
| 10033607 | MERCEDES BENZ: CHECK FOR INSTALLATION OF SPACER BETWEEN BRAKE AND FUEL LINE, INSTALL IF NECESSARY. THE SPACER BETWEEN THE BRAKE LINE AND FUEL LINE MAY NOT HAVE BEEN INSTALLED. CHECK FOR PRESENCE OF A SPACER, AND IF MISSING, INSTALL THE SPACER. CHECK THE BRAKE LINE FOR CHAFE MARKS FROM THE FUEL LINE AND REPLACE THE BRAKE LINE IF NECESSARY. MODEL 163. *PE |
| 10033074 | XENTRY: OUTSIDE DOOR HANDLE NO LONGER RETURNS TO END POSITION. DUE TO A BENT PIN IN THE DYNAMIC BALANCER, THE SUPPORT SPRING OF THE BEARING BRACKET CAN SLIDE OUT OF PLACE OR BECOME UNHOOKED. MODELS 164, 251, 166, 204, 212. NO MODEL YEARS LISTED. *PE UPDATED 2/1/12. *PE UPDATED 10/3/12. *PE UPDATED 10/21/13. *PE |
| 10025648 | RATTLING/THUMPING NOISE ON ROUGH ROADS AND/OR KNOCKING NOISE WHEN MOVING STEERING IN BOTH DIRECTIONS ON ALL MODEL 164 AND 251 VEHICLES. MODEL YEARS UNKNOWN. *PE |
| 10025647 | WATER ENTRY INTO VEHICLE INTERIOR FOR ALL MODEL 164 VEHICLES. *PE |
NHTSA manufacturer communications (public domain)
NHTSA investigations
PE10050 · Exterior lighting:brake lights:switchopened 21 Dec 2010 · closed 4 May 2011
Brake lamp switch failure.
EA08009 · Fuel system, gasoline:delivery:hoses, lines/piping, and fittingsopened 28 Apr 2008 · closed 16 Dec 2009
BRAKE LINE CHAFE
PE07007 · Electronic stability control:automatic (asc)opened 1 Feb 2007 · closed 11 Jul 2007
ELECTRONIC STABILITY CONTROL MALFUNCTION
NHTSA Office of Defects Investigation