Problems owners report
Complaints filed with NHTSA about the 2014 MINI Countryman, by the system named in each complaint. One complaint can name several.
- Electrical system8
- Unknown or other5
- Engine3
- Exterior lighting3
- Structure2
- Fuel/propulsion system2
- Air bags1
- Engine and engine cooling1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 1 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fatal crashes in the US
From 2020 to 2023, 3 2014 Countryman vehicles were involved in crashes on US public roads in which someone died; 2 people died inside them. This is a count, not a crash rate: it grows with the number of cars on the road.
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)
New York safety inspections
At its first New York inspection the 2014 MINI Countryman failed the safety check 1.59% of the time — 31% less often than the average 2014 passenger car (2.30%). Median odometer at inspection: 81,990 miles.
2,075first inspections
1.59%failed on safety
81,990 mimedian odometer
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
In the United Kingdom
10,138 cars built in 2014 were licensed for the road at the end of 2025, and 327 more were declared off the road (SORN).
10,138licensed, end of 2025
97%of those still registered are on the road
Department for Transport and DVLA, vehicle licensing statistics (table VEH0124, year of manufacture) · Open Government Licence v3.0
MOT test results in Great Britain
In 2023, 12,974 of these cars first registered in 2014 took their annual MOT test. 82% passed first time; among all cars first registered in 2014 the figure was 72%.
82%passed first time
72%all cars from 2014
62,200 miaverage mileage at the test (all cars 74,000 mi)
| Failed on | These cars | All cars from 2014 |
|---|---|---|
| Lamps, reflectors and electrical equipment | 6.7% | 10.0% |
| Tyres | 5.9% | 6.8% |
| Brakes | 2.9% | 6.0% |
| Visibility | 2.3% | 4.3% |
| Suspension | 1.8% | 8.2% |
| Noise, emissions and leaks | 1.4% | 2.5% |
DVSA anonymised MOT tests and results, 2023 (Department for Transport) · Open Government Licence v3.0 · first tests only; a fix made at the test station within the hour still counts as a fail
In New Zealand
9 2014 cars are on the New Zealand register; 100% arrived as used imports, 0% were sold new in New Zealand.
NZ Transport Agency Waka Kotahi, Motor Vehicle Register (March 2026) · CC BY 4.0
Recalls in Canada
1 Transport Canada recall for the 2014 MINI Countryman.
| 2024544 15 Aug 2024 | Label Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "N… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
No recall campaigns cover the 2014 MINI Countryman.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What MINI told its dealers about the 2014 MINI Countryman: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11006765 | For the eligible vehicles listed above, the limited warranty for the vehicles Selector Lever Magnetic Shift Interlock Mechanism (Gearshift lug assembly portion) has been extended to: 10 years/120,000 miles as determined by the vehicles original in-service date, When a gearshift lug repair kit (item # 2) installation procedure is required to be performed to address a displayed Check Control message (CCM) that states: "P not engaged - secure vehicle with parking brake against rolling away." |
| 10249431 | Customer complains of a musty odor or damp front footwell carpet. |
| 10245428 | Cavity protection applied to underside of the hood is leaking out onto the wheel arch trim and grille. |
| 10244507 | MINI electrical systems have continued to develop over the past few years. As a result, the demand on the batteries has increased. Breakdowns due to an empty battery or problems in the vehicles electrical system can have various causes, most of which are not due to the battery itself. For this reason, a battery replacement will permanently eliminate the problem only in the rarest of cases. The energy diagnosis test module helps to localize these causes. This document covers important information for the dealer on how to handle discharged battery complaints. Without performing the energy |
| 10206696 | New RDC wheel electronics will be introduced with future generation MINI models. The new wheel electronics are identified as Huf Generation 5. These new wheel electronics will need to be programmed using the new tool when replaced or when depressurized (0 psi) for more than 2 minutes. |
| 10193499 | One or both of the situations listed below maybe encountered: ? Android device connection stability (dropped calls) ? 3rd Party App Metadata ? the album art and song title do not update when streaming audio from Pandora or Spotify, etc |
| 10160298 | N18 THERMOSTAT WITH THERMOSTAT HOUSING: LIMITED WARRANTY EXTENSION TO 10 YEARS/ This Service Information bulletin supersedes SI M01 02 18 dated May 2018. |
| 10160229 | N18 THERMOSTAT WITH THERMOSTAT HOUSING: LIMITED WARRANTYEXTENSION TO 10 YEARS/ This Service Information bulletin supersedes SI M01 02 18 dated May 2018. |
| 10152680 | "MANUAL TRANSMISSION - STIFF DIAGONAL GEARSHIFT LEVER MOVEMENT. The customer may complain of a ""stiff diagonal shift"" (e.g., N-R, R-N, 2-3/3-2 or 4-5/5-4). Also, in some cases, gears cannot be selected, or the selector gear does not go into the neutral position. CAUSE 1. The deflection lever circlip of the gearshift mechanism is damaged or missing. 2. Possible corrosion at the gearshift mechanism (shift cables or transmission gearshift unit)" |
| 10152362 | "Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated." |
| 10152359 | N18 Engine: FC 37DE Engine Ventilation, Heating, Triggering Stored in the DME After Programming. The Service Engine Soon lamp is illuminated after reprogramming the vehicle to integration level R056-11-11503 (ISTA/P P45.1.3.0) or higher. When diagnosed, the following fault code is stored in DME fault memory: ??37DE Engine ventilation, heating, triggering: open circuit CAUSE Due to a DME software change, the diagnostic monitoring capability is improved for the engine ventilation heating system. However, a fault will be stored in the fault memory because the engine ventilation heater circuit has |
| 10152338 | Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM (footwell module) door lock status due to voltage variations |
| 10151423 | CAS Module Fails Programming with CoAPI Error 2082. During vehicle programming, the CAS (Car Access System) module fails to program with CoAPI error 2082 displayed. Refer to the attachment, which lists the affected CAS serial numbers. The following part numbers are affected: 61 35 9 287 534 61 35 9 226 238 61 35 9 227 053 61 35 9 287 535 |
| 10151349 | Bluetooth Connection Failures This Service Information bulletin supersedes SI M84 01 14 dated February 2016.. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware |
| 10151347 | Delay in Automatic Driving Light Switching on/off. When driving out of a tunnel or exiting underground parking, the automatic driving light remains switched on for two minutes. Shut-off period varies based on detected situation. This is normal operational behavior. |
| 10151060 | This Service Information bulletin supersedes SI M84 01 14 dated November 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: z Apple iPhones z Samsung S6 and the S6 Edge. Connectivity failure examples are: z Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. z Contact List incomplete z General connection failures z Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) z Samsung S6 and S6 Edge device firmware |
| 10150307 | Creaking/Cracking Noise from the Upper Roof Area. A creaking noise can be heard from the rear roof area when driving on rough roads or uneven surfaces. CAUSE The body shell roof support area, where the C-pillar is joined to the roof, is buckling, creating the noise. |
| 10150305 | Adjusting Rear Camber. Rear camber cannot be adjusted properly. CAUSE Repair instructions not followed properly |
| 10150241 | Incorrect Customer Relations Telephone Number Is Saved in the Vehicle. The customer is not connected to MINI Customer Relations after dialing the number displayed in the vehicle Kombi or radio. CAUSE During the Pre-Delivery Inspection (PDI), the incorrect telephone number is being written into the vehicle. INFORMATION 1. When performing the PDI test plan, it is extremely important that you select MINI if the ISID is configured for both BMW and MINI. 2. After completion of the PDI test plan, verify that the customer relations number stored in the vehicle is correct. 3. The correct customer rela |
| 10150238 | "N14 and N18 Engine: High-pressure Pump Repair Instruction. INFORMATION The current version of ISTA/D Repair Instruction 13 51 017, ""Removing and installing or replacing high-pressure pump (N14, N18)"" has a procedure error. The current version of the Repair Instruction states to replace the highpressure supply hose on the N14 engine. The Repair Instruction also states not to replace the high-pressure supply hose on the N18 engine. The N18 portion of the Repair Instruction is incorrect. As an interim solution, follow the procedure outlined below until this portion of the Repair Instruction is |
| 10150237 | ?N18 Engine: FC 2BF2 Rail Pressure Sensor Is Stored in DME Fault Memory. The customer states that the Service Engine Soon lamp is illuminated and the following fault is stored in the DME: FC 2BF2 Rail pressure sensor, workspace: pressure too high CAUSE A DME calibration error in the fuel pressure diagnostics results in an increased sensitivity. |
| 10150205 | "?SI M34 01 13 November 2013 BrakesTechnical Service This Service Information bulletin supersedes SI 34 01 13 dated October 2013. designates changes to this revision SUBJECT Erroneous ""Service due"" Message Though Brake Lining Thickness Sufficient. The CBS data calculated for the remaining distance of the front and/or rear brake pads does not agree with the actual brake pad thickness. The yellow brake lining service due indicator illuminates even though the pad thickness is greater than the minimum wear limit (approximately 3.7 mm); the brake wear sensor has not yet been activated (from a th |
| 10150091 | "DWA (Anti-theft Alarm System): False Alarm Is Triggered Intermittently. INFORMATION Parts replacement will not solve the problem if one or more of the conditions described in the situation above caused the alarm to trigger. The sensitivity of the interior ultrasonic sensor cannot be reduced. If the customer wishes to park the vehicle with the sunroof tilted, the window partially open, and/or in an area with excessive local noise, the interior sensor must be switched off by using the following procedure: Press the lock button on the remote control twice in succession. The LEDs flash in short s |
| 10150088 | "PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS. SUBJECT Service Action: Retrofit of Engine Coolant Temperature Sensor. Internal corrosion can form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading can lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated." |
| 10150087 | The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid. |
NHTSA manufacturer communications (public domain)