Problems owners report
Complaints filed with NHTSA about the 1992 Nissan Maxima, by the system named in each complaint. One complaint can name several.
- Engine and engine cooling22
- Fuel system, gasoline21
- Visibility14
- Air bags11
- Seat belts9
- Seats6
- Electrical system6
- Service brakes, hydraulic6
- Power train5
- Fuel system, other4
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 18 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fatal crashes in the US
From 2020 to 2023, 3 1992 Maxima vehicles were involved in crashes on US public roads in which someone died; 3 people died inside them, and 2 of the vehicles rolled over. This is a count, not a crash rate: it grows with the number of cars on the road.
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)
New York safety inspections
At its first New York inspection the 1992 Nissan Maxima failed the safety check 0.84% of the time — 31% less often than the average 1992 passenger car (1.22%). Median odometer at inspection: 129,182 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
In the United Kingdom
0 cars built in 1992 were licensed for the road at the end of 2025, and 5 more were declared off the road (SORN).
Department for Transport and DVLA, vehicle licensing statistics (table VEH0124, year of manufacture) · Open Government Licence v3.0
In New Zealand
22 1992 cars are on the New Zealand register; 18% arrived as used imports, 82% were sold new in New Zealand.
NZ Transport Agency Waka Kotahi, Motor Vehicle Register (March 2026) · CC BY 4.0
Recalls in Canada
2 Transport Canada recalls for the 1992 Nissan Maxima.
| 1995233 28 Dec 1995 | Fuel System TRAPPED MUD AND SALT CAN RESULT IN CORROSION OF THE FUEL FILLER TUBE AND THE WHEEL HOUSING. SIGNIFICANT CORROSION OF THE FUEL FILLER TUBE MAY RESULT IN FUEL LEA… |
| 1994022 4 Feb 1994 | Seats And Restraints THERE IS THE POSSIBILITY THAT THE AIRBAG MAY DEPLOY AS THE RESULT OF UNDERBODY IMPACTS. THIS COULD RESULT IN LOSS OF DRIVER CONTROL. CORRECTION: TUNNEL SENSOR … |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
IT IS POSSIBLE FOR A MIXTURE OF MUD AND SALT TO GET TRAPPED BETWEEN THE FUEL FILLER TUBE AND WHEEL HOUSING. THE TRAPPED MUD AND SALT CAN RESULT IN CORROSION OF THE FUEL FILLER TUBE AND THE WHEEL HOUSING.
IN SOME UNDERBODY IMPACTS THE AIRBAG SENSOR ACTIVATES AND SENDS A SIGNAL TO THE AIRBAG, LOCATED IN THE CENTER OF THE STEERING WHEEL, CAUSING THE DRIVER'S SIDE AIRBAG TO INFLATE.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Nissan told its dealers about the 1992 Nissan Maxima: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 606182 | KEY VALUE BRAKE PAD SERVICE INFORMATION. *TT |
| 604301 | SERVICE INFORMATION ON KEY VALUE BRAKE PADS. *TT |
| 45008 | NEW NON-ASBESTOS REPLACEMENT PADS AND SHOES. *TW |
| 39655 | MAXIMA GXE REAR DRUM SQUEAL. *TW |
| 39652 | NEW NON-ASBESTOS BRAKE PAD. *TW |
| 39639 | LITTLE OR NO HEAT FROM THE AUTOMATIC HEAT CONTROL. *TW |
| 39330 | VEHICLES MAY EXHIBIT NOISE FROM THE VTC (VARIABLE TIMING CONTROL) INTAKE CAMSHAFT SPROCKETS UNDER CERTAIN OPERATING CONDITIONS. *TW |
| 37997 | AUTOMATIC TRANSMISSION SLIPPING. *TW |
| 10243708 | DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10239062 | SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components. |
| 10239060 | 12 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. |
| 10235710 | INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin. |
| 10235707 | VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10232658 | REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10232657 | WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10232656 | WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10232652 | DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10206391 | STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10192305 | SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail. |
| 10192233 | Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to, |
| 10192217 | If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incident |
| 10192216 | SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. V |
| 10192145 | SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail. |
| 10188377 | STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 10185459 | AIR BAG DEPLOYMENT PROCEDURE This bulletin is no longer active. Please discard previous versions of NTB92-096. |
NHTSA manufacturer communications (public domain)
NHTSA investigations
INADVER.AIR BAG DEPLOYMENT
INADVER.AIR BAG DEPLOYMENT
NHTSA Office of Defects Investigation