Problems owners report
Complaints filed with NHTSA about the 2007 Suzuki Reno, by the system named in each complaint. One complaint can name several.
- Power train26
- Air bags13
- Electrical system12
- Vehicle speed control8
- Exterior lighting5
- Engine and engine cooling4
- Engine3
- Seats2
- Seat belts2
- Fuel/propulsion system1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 5 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
New York safety inspections
At its first New York inspection the 2007 Suzuki Reno failed the safety check 3.66% of the time — 51% more often than the average 2007 passenger car (2.42%). Median odometer at inspection: 108,512 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Recalls
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2004-2008 Forenza vehicles, and 2005-2008 Reno vehicles manufactured from September 1, 2003, through July 30, 2008. In the affected vehicles, heat may be generated in the headlamp switch or daytime running light (DRL) module which could melt the headlamp switch or the DRL module.
ON CERTAIN PASSENGER VEHICLES, THE FRONT SEAT BELT TONGUE WILL NOT LATCH INTO THE BUCKLE AND, IN RARE CASES, EVEN THE LOCKED TONGUE WILL POP OUT BY LOW STRETCHING FORCE. IF THE BUCKLE DOES NOT LATCH COMPLETELY, THE BUCKLE COULD RELEASE WITHOUT PRESSING THE RELEASE BUTTON.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Suzuki told its dealers about the 2007 Suzuki Reno: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10216558 | Reminder of the importance to conduct safety inspections for rust damage to suspension and related parts that could be caused by road salt or other chemicals applied to the roadway. |
| 10152052 | This Service Bulletin was sent by Suzuki Motor Corporation to its authorized Suzuki automobile distributors in the U.S., explaining the importance of proper inspection and maintenance of suspension lower arm ball joints to prevent the ball stud from becoming separated from the suspension lower arm. |
| 10086741 | THIS SERVICE BULLETIN UPDATES A BULLETIN ORIGINALLY ISSUED ON MAY 18, 2016, CONCERNING A SPECIAL WARRANTY EXTENSION (ZH) FOR 2005-2008 SUZUKI FORENZA AND SUZUKI RENO VEHICLES. THE UPDATES ARE: (1) THE EXISTENCE OF DIAGNOSTIC TROUBLE CODE (DTC) B1379 IS ADDED TO THE LIST OF DTCS THAT MAKE A VEHICLE ELIGIBLE FOR REPAIR UNDER SPECIAL WARRANTY EXTENSION ZH; AND (2) THE PROCEDURE FOR INSPECTING THE SEAT HEIGHT ADJUSTER FOR DAMAGE HAS BEEN CLARIFIED. |
| 10052515 | SUZUKI: SUZUKI HAS REPLACEMENT OIL PUMPS THAT HAVE A THREADED PLUG. THE THREADED PROVES TO BE DIFFICULT TO REMOVE WITHOUT CAUSING DAMAGE TO THE NEW OIL PUMP. THIS BULLETIN PROVIDES PROCEDURES WHEN REPLACING THE OLD OIL PUMP. *JS |
| 10036954 | SUZUKI VEHICLE: COUNTER MEASURE PROCEDURE FOR DTC P2135. MIL LIGHT IS ON; DTC P2135 STORED WITHOUT FULLY CHECKING SYSTEM AND CIRCUITS AFTER REPAIRS AND/OR REPLACEMENT TO THROTTLE BODY. *PE |
| 10034484 | SUZUKI VEHICLES: COUNTER MEASURE PROCEDURE FOR DTC P2138. MIL LIGHT IS ON, DTC P2138 STORED. FAILURE OF THE CONNECTOR AND/OR WIRING CIRCUITS BETWEEN THE ECM AND THE ACCELERATOR PEDAL POSITION SENSOR. MODELS FORENZA, FORENZA WAGON AND RENO (RQ420). *PE |
| 10024197 | REQUIRED AUTOMATIC TRANSMISSION CONTROL MODULE INITIALIZATION PROCEDURE. MY 2004-2008 FORENZ SEDAN/WAGON, RENO (RQ420). *NJ |
| 10023878 | P0441 OR P0496 (EVAPORATIVE EMISSION SYSTEM CONTINUOUS PURGE FLOW). *NJ |
| 10022793 | MANUAL TRANSMISSION SHIFT LINKAGE ADJUSTMENT. *NJ |
NHTSA manufacturer communications (public domain)