Problems owners report
Complaints filed with NHTSA about the 2012 Chevrolet Captiva Sport, by the system named in each complaint. One complaint can name several.
- Electrical system46
- Engine22
- Unknown or other15
- Electronic stability control (esc)12
- Steering9
- Air bags5
- Service brakes5
- Vehicle speed control4
- Power train4
- Exterior lighting4
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 3 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fatal crashes in the US
From 2020 to 2023, 28 2012 Captiva Sport vehicles were involved in crashes on US public roads in which someone died; 19 people died inside them, and 2 of the vehicles rolled over. This is a count, not a crash rate: it grows with the number of cars on the road.
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)
New York safety inspections
At its first New York inspection the 2012 Chevrolet Captiva Sport failed the safety check 3.61% of the time — 43% more often than the average 2012 passenger car (2.52%). Median odometer at inspection: 109,247 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Recalls
GENERAL MOTORS LLC (GM) IS RECALLING CERTAIN MODEL YEAR 2012 CHEVROLET CAPTIVA SPORT PASSENGER VEHICLES MANUFACTURED FROM APRIL 26, 2012, THROUGH MAY 17, 2012. THESE VEHICLES FAIL TO CONFORM TO THE PARK BRAKE PERFORMANCE REQUIREMENTS FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE PARK BRAKE CABLE MAY NOT BE FULLY SEATED IN ITS CONNECTOR AND MAY SEPARATE FROM THE CONNECTOR. IF THIS OCCURS, THE PARK BRAKE WILL BECOME INOPERATIVE AND WILL NOT HOLD THE VEHICLE.
GENERAL MOTORS (GM) IS RECALLING CERTAIN MODEL YEAR 2011-2012 CHEVROLET CAPTIVA VEHICLES MANUFACTURED FROM OCTOBER 2, 2009, THROUGH APRIL 21, 2011. DRIVING THE VEHICLE WITH THE TRANSMISSION IN MANUAL MODE AND IN FIRST GEAR CAUSES THE ENGINE AND POWER STEERING PUMP TO OPERATE AT HIGHER SPEED THAN IS TYPICAL. INCREASED PUMP SPEED GENERATES HEAT THAT IS TRANSFERRED TO THE POWER STEERING FLUID AND CAN RESULT IN POWER STEERING FLUID TEMPERATURES THAT APPROACH THE POWER STEERING PUMP RESERVOIRS MELTING POINT.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Chevrolet told its dealers about the 2012 Chevrolet Captiva Sport: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011805 | This Preliminary information communicates a GM part number forreflective high temperature heat or insulating tape when repairing wiring harnesses. |
| 11011782 | This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel. |
| 11011709 | This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. |
| 11011444 | This Preliminary information communicates to the dealer a process for accessing the procedure to add attachments to a GM technical assistance case using the dealer case management tool. |
| 11011205 | This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules. |
| 11010651 | This service bulletin informs the technician of an alternate lift procedure that has been developed when the lift plate does not fit the top of the transmission case for 6T30, 6T35, 6T40, 6T45, and 6T50 Transmissions. |
| 11010545 | This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S). |
| 11010491 | This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs. |
| 11010490 | This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption. |
| 11010421 | This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements. |
| 11009764 | This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories. |
| 11009756 | This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management. |
| 11009532 | This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive. |
| 11009531 | This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive. |
| 11009156 | This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update. |
| 11009088 | This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped. |
| 11009039 | This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). |
| 11008956 | This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only). |
| 11008906 | This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. |
| 11008898 | The bulletin provides direction on how to locate the Temporary Service Part (TSP) form in GlobalConnect. |
| 11007936 | This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak. |
| 11007935 | This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak. |
| 11007208 | This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection. |
| 11007196 | This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. |
| 11007121 | This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. |
NHTSA manufacturer communications (public domain)