11,145,731 US VINs16,875,657 Dutch plates3,603,918 businesses in 233 countries
English
AfrikaansAzərbaycancaBahasa IndonesiaBahasa MelayuCatalàČeštinaDanskDeutschEestiEnglishEspañolFilipinoFrançaisGaeilgeHrvatskiÍslenskaItalianoKiswahiliLatviešuLietuviųMagyarMaltiNederlandsNorskOʻzbekchaPolskiPortuguês (Brasil)Português (Portugal)RomânăShqipSlovenčinaSlovenščinaSrpskiSuomiSvenskaTiếng ViệtTürkçeΕλληνικάБеларускаяБългарскиКыргызчаҚазақшаМакедонскиМонголРусскийУкраїнськаქართულიՀայերենעבריתاردوالعربيةفارسیनेपालीहिन्दीবাংলাதமிழ்සිංහලไทยລາວမြန်မာខ្មែរ한국어日本語简体中文繁體中文
Check a VIN
CarsLore / Ford / E-450 / 2019

2019 Ford E-450

5 owner complaints — #23 of 31 E-450 model years. 0 recalls, 6 service bulletins.

5complaints · 0 crashes, 0 fires
0recalls
6manufacturer bulletins
111,059 mimedian mileage at failure

Problems owners report

Complaints filed with NHTSA about the 2019 Ford E-450, by the system named in each complaint. One complaint can name several.

  • Structure2
  • Unknown or other1
  • Fuel/propulsion system1
  • Tires1

NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported

Compared with other years

’92’95’98’01’04’07’10’13’16’19’22’255’92’95’98’01’04’07’10’13’16’19’22’255

NHTSA ODI complaints by model year

Fatal crashes in the US

From 2020 to 2023, 25 2019 E-450 vehicles were involved in crashes on US public roads in which someone died; 7 people died inside them, and 2 of the vehicles rolled over. This is a count, not a crash rate: it grows with the number of cars on the road.

NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)

Recalls

No recall campaigns cover the 2019 Ford E-450.

Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.

NHTSA recalls · summaries in NHTSA's own words

Service bulletins

What Ford told its dealers about the 2019 Ford E-450: known faults, fixes and updates.

BulletinSummary
11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership managemen
10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
10241626Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS > Diagnostics tab > HVBoM > Features > Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
10241547Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.

NHTSA manufacturer communications (public domain)