Problems owners report
Complaints filed with NHTSA about the 2022 Ford Explorer Hybrid, by the system named in each complaint. One complaint can name several.
- Structure1
- Visibility/wiper1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fuel consumption
Official Canadian test results for 1 variant: combined 9.6 L/100 km (about 25 mpg US), CO₂ 225 g/km.
| Variant | City | Highway | Combined |
|---|---|---|---|
| Explorer Hybrid AWD · Sport utility vehicle: Standard · Regular gasoline | 10.1 | 9.0 | 9.6 |
Litres per 100 km. Natural Resources Canada, Fuel consumption ratings (open.canada.ca) · Open Government Licence – Canada
Recalls
22V255000 · Power train14 Apr 2022 · 252,936 vehicles
Ford Motor Company (Ford) is recalling certain 2020-2021 Explorer Police FHEV, Explorer Police 3.3L, and 2020-2022 Explorer 2.3L RWD, 3.0L PHEV, 3.3L FHEV, and 3.0L ST GAS vehicles. The rear axle horizontal mounting bolt may fracture and cause the driveshaft to disconnect.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Ford told its dealers about the 2022 Ford Explorer Hybrid: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10250306 | Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM) and auto start/stop disabled. This may be due to a loose wiring connection to the belt integrated starter generator (BISG). The Workshop Manual (WSM) has recently been updated to provide new direction for DTC P0A1E. Refer to the WSM, Section 303-06 Starting Sy |
| 10250298 | 2020-2023 Escape/Explorer, 2021-2023 F-150 and 2022-2023 Maverick vehicles equipped with a full hybrid electric vehicle (FHEV) powertrain may exhibit a cable connection error screen from the Midtronics xRC-3363 High Voltage Battery Rescue Charger. The xRC-3363 will prompt the technician to verify the low voltage connections, when no actual fault is present. This may be due to the software level of the Midtronics xRC-3363 High Voltage Battery Rescue Charger. To correct this condition, update the Midtronics xRC-3363 High Voltage Battery Rescue Charger to the latest software level by navigating t |
| 10249785 | Some 2020-2023 Explorer 3.3L full hybrid electric (FHEV) vehicles built on or before 12-Nov-2023 may exhibit an illuminated malfunction indicator lamp (MIL) and/or powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P084B stored in the powertrain control module (PCM). This may be due to the software thresholds in the PCM |
| 10245358 | This article supersedes TSB 23-2279 to update the Service Procedure. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a powertrain malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM). This may be due to the belt integrated starter generator (BISG). To correct this condition, follow the Service Procedure to diagnose and repair this symptom. |
| 10240743 | The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information. |
| 10236587 | 2020-2023 Explorer/Aviator/Police Interceptor Utility Hybrid vehicles may exhibit a charging system warning in the message center and/or illuminated battery lamp with DTC B11D9 present in the body control module (BCM). Refer to Workshop Manual (WSM), Section 414-01, Pinpoint Test C for diagnosis and repair. If the 125 amp fuse on the 14300 wire harness at the auxiliary battery is open, do not replace a complete wire harness to obtain this fuse. The 125 amp fuse (service part number JU5Z-14526-A) is now available separately for service. If the 125 amp fuse is ok, check C1168 connector / SBF08 c |
| 10226727 | Some 2020-2022 Aviator/Explorer Hybrid vehicles may experience a concern where the EV power flow does not display in the center display screen. This may be due to accessory protocol interface module (APIM) software. To correct the condition, run the APIM-SYNC Module (APIM) Standard Programming application using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| 10220380 | Some 2020-2022 Explorer/Aviator/Police Interceptor Utility vehicles equipped with a hybrid powertrain may exhibit an illuminated MIL with diagnostic trouble code (DTC) P2D40. This may be due to the chiller not interpreting the correct cooling value of the high voltage battery chiller. To correct the condition, follow the Service Procedure to diagnose the cause of the incorrect value. |
| 10212126 | Some 2020-2022 Aviator/Explorer Hybrid vehicles may experience a low battery warning message displayed in the message center with diagnostic trouble code B11D9 present in the body control module (BCM). Refer to Workshop Manual, Section 414-01, Pinpoint Test C for diagnosis and repair. If the 125 amp fuse on the 14300 wire harness at the auxiliary battery is open, it is not necessary to replace a complete wire harness to obtain this fuse. Service part number JU5Z-14526-A is now available separately for service. |
| 10212101 | Some 2020-2022 Explorer/Aviator Hybrid vehicles built on or before 11-Apr-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble code (DTC) P1A0C stored in the PCM. This may be due to the software in the battery energy control module (BECM). To correct the condition follow the Service Procedure to reprogram the BECM, powertrain control module (PCM), and other modules in a coordinated flash. |
NHTSA manufacturer communications (public domain)
NHTSA investigations
DP22005 · Electrical system:propulsion systemopened 27 Jan 2023 · closed 7 Aug 2023
Pedestrian alert sounds
NHTSA Office of Defects Investigation