Problems owners report
Complaints filed with NHTSA about the 2003 Honda CR-V, by the system named in each complaint. One complaint can name several.
- Air bags125
- Engine and engine cooling86
- Electrical system62
- Exterior lighting39
- Vehicle speed control32
- Equipment30
- Unknown or other24
- Power train23
- Visibility18
- Latches/locks/linkages17
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 39 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fatal crashes in the US
From 2020 to 2023, 45 2003 CR-V vehicles were involved in crashes on US public roads in which someone died; 26 people died inside them, and 14 of the vehicles rolled over. This is a count, not a crash rate: it grows with the number of cars on the road.
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)
New York safety inspections
At its first New York inspection the 2003 Honda CR-V failed the safety check 2.26% of the time — 7% more often than the average 2003 passenger car (2.11%). Median odometer at inspection: 167,357 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
In the Netherlands
332 first registered in 2003 are on Dutch roads; 14% arrived later as imports.
Most common APK defects
- Bandenspanning niet op juiste waarde144
- Licht- donkerscheiding dimlicht onduidelijk128
- Kentekenplaatverlichting werkt niet (goed) / ontbreekt103
- Stadslicht werkt niet (goed)86
- Stofhoes fuseekogel beschadigd en dicht niet af81
- Dimlicht onjuist afgesteld79
- Band onvoldoende profiel79
- Ruitenwisserinstallatie geeft onvoldoende zicht71
Colours
RDW Open Data: registered vehicles and APK defects (CC0) · defect descriptions in the RDW's Dutch wording
In the United Kingdom
3,371 cars built in 2003 were licensed for the road at the end of 2025, and 1,446 more were declared off the road (SORN).
Department for Transport and DVLA, vehicle licensing statistics (table VEH0124, year of manufacture) · Open Government Licence v3.0
MOT test results in Great Britain
In 2023, 5,659 of these cars first registered in 2003 took their annual MOT test. 50% passed first time; among all cars first registered in 2003 the figure was 57%.
| Failed on | These cars | All cars from 2003 |
|---|---|---|
| Lamps, reflectors and electrical equipment | 28.0% | 21.6% |
| Suspension | 22.5% | 16.4% |
| Brakes | 14.0% | 13.9% |
| Noise, emissions and leaks | 12.4% | 7.4% |
| Visibility | 9.9% | 7.7% |
| Body, chassis, structure | 7.5% | 9.4% |
DVSA anonymised MOT tests and results, 2023 (Department for Transport) · Open Government Licence v3.0 · first tests only; a fix made at the test station within the hour still counts as a fail
In New Zealand
610 2003 cars are on the New Zealand register; 20% arrived as used imports, 78% were sold new in New Zealand.
NZ Transport Agency Waka Kotahi, Motor Vehicle Register (March 2026) · CC BY 4.0
Fuel consumption
Official Canadian test results for 2 variants: combined 11.0–11.5 L/100 km (about 20–21 mpg US), CO₂ 253–265 g/km.
| Variant | City | Highway | Combined |
|---|---|---|---|
| CR-V 4X4 · Sport utility vehicle · Regular gasoline | 12.1 | 9.7 | 11.0 |
| CR-V 4X4 · Sport utility vehicle · Regular gasoline | 12.5 | 10.3 | 11.5 |
Litres per 100 km. Natural Resources Canada, Fuel consumption ratings (open.canada.ca) · Open Government Licence – Canada
Recalls in Canada
8 Transport Canada recalls for the 2003 Honda CR-V.
| 2019323 28 Jun 2019 | Airbag Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the p… |
| 2019117 7 Mar 2019 | Airbag Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal.… |
| 2015602 18 Dec 2015 | Airbag On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the … |
| 2015225 27 May 2015 | Airbag On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inf… |
| 2014567 15 Dec 2014 | Airbag Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Hon… |
| 2014242 20 Jun 2014 | Airbag On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause th… |
| 2013111 10 Apr 2013 | Airbag On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause t… |
| 2003181 5 Aug 2003 | Other On certain vehicles, excessive corrosion of the shift cable linkage may prevent the automatic transmission from shifting to Park. If the vehicle operator fails… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Honda (American Honda Motor Co.) is recalling certain 2002-2006 CR-V vehicles. Moisture may enter the driver side power window master switch, causing the switch to fail or melt.
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous Takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.
Honda (American Honda Motor Co.) is recalling certain 2003-2012 Honda Accord and Pilot, 2010 Accord Crosstour, 2001-2011 Civic, 2002-2011 CR-V, 2003-2004, 2006-2008 and 2011 Element, 2007 and 2009-2013 Fit, 2010-2012 Insight, 2002-2004 Odyssey, and 2012 Ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2005 Honda Civic vehicles manufactured March 21, 2000, to January 20, 2005, 2001-2004 Honda Civic GX vehicles manufactured June 14, 2000, to August 19, 2004, 2003-2005 Honda Civic Hybrid vehicles manufactured February 24, 2002, to January 18, 2005, 2003-2007 Honda Accord vehicles manufactured February 21, 2002, to August 28, 2007, 2002-2004 Honda CR-V vehicles, 2002-2003 Honda Odyssey vehicles manufactured June 19, 2001, to July 12, 2003, 2003 Acura MDX vehicles manufactured September 19, 2002, to June 19, 2003, 2003 Honda Element vehicles manufactured June 25, 2002, to July 31, 2003, and 2003 Honda Pilot vehicles manufactured November 26, 2001, to August 21, 2003. The affected vehicles have a passenger side frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture upon its deployment.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.
American Honda Motor Co. (Honda) is recalling certain model year 2001-2005 Honda Civic, 2003-2004 Civic CNG and Element, 2002-2005 CR-V, 2002-2004 Odyssey, 2003-2005 Accord, Pilot, Civic Hybrid, and Acura MDX, 2005 Acura RL and 2006 Honda Ridgeline vehicles originally sold, or ever registered, in geographic locations associated with high absolute humidity. Specifically, vehicles sold, or ever registered, in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, U.S. Virgin Islands, Saipan, Guam, and American Samoa are addressed by this recall. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
American Honda Motor Company, Inc.'s (Honda) is conducting a limited regional recall for certain model year 2003-2005 Accord, Civic, CR-V, Pilot and Acura MDX, model year 2003-2004 Odyssey and Element, and model year 2005 Acura RL, and 2006 Honda Ridgeline vehicles originally sold, or ever registered in California, and equipped with Takata-brand air bag inflators. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
Honda is recalling certain model year 2002-2006 CR-V passenger vehicles, manufactured from February 19, 2002, through July 28, 2006. The driver-side power window switch may fail or melt.
HONDA IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CR-V; MODEL YEAR 2003 THROUGH 2005 PILOT; AND MODEL YEAR 2002 AND 2003 CIVIC VEHICLES. IN MARCH 2012, HONDA FILED A DEFECT REPORT TO RECALL CERTAIN MODEL YEAR 2002 THROUGH 2004 CR-V AND CERTAIN MODEL YEAR 2003 PILOT VEHICLES. IN AUGUST 2012, HONDA INFORMED THE AGENCY THAT IT WAS INCLUDING AN ADDITIONAL 820,789 VEHICLES INCLUDING CERTAIN MODEL YEAR 2004 AND 2005 PILOTS AND MODEL YEAR 2002 AND 2003 CIVICS. THE TOTAL NUMBER OF VEHICLES BEING RECALLED IS NOW 1,375,217. DUE TO TENSION FROM THE COMBINATION SWITCH WIRING HARNESS, WEAR ON THE SURFACE OF THE ELECTRICAL TERMINAL CAN OCCUR, YIELDING COPPER OXIDE, WHICH INCREASES ELECTRICAL RESISTANCE. INCREASED ELECTRICAL RESISTANCE MAY CAUSE THE TERMINAL ENDS TO MELT WITHIN THE WIRING HARNESS CONNECTOR.
ON CERTAIN SPORT UTILITY VEHICLES, THE WIRE HARNESS OF THE DRIVER'S FRONT AIR BAG WAS INCORRECTLY WIRED.
ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS, EXCESSIVE CORROSION OF THE SHIFT CABLE LINKAGE COULD PREVENT THE DRIVER FROM SHIFTING THE AUTOMATIC TRANSMISSION INTO PARK.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Honda told its dealers about the 2003 Honda CR-V: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 629094 | SQUEAK OR TWANG CONDITION WHEN THE CLUTCH PEDAL IS PRESSED. *TT *MJ THIS BULLETIN REPLACES PREVIOUS BULLETIN DATED 3/16/2004. *TT |
| 10226214 | Service Bulletin - REVISION SUMMARY - Under WARRANTY CLAIM INFORMATION, a note was added. BACKGROUND Under severe conditions, water or other liquid may enter the drivers window and reach the power window master switch on the door panel. Liquid in the switch can damage the switchs printed circuit board (PCB), causing the switch to fail. In rare cases, the damaged PCB creates a short circuit that overheats the switch connectors and melts them, leading to a possible fire. All affected vehicles, even those previously repaired under S/B 12-067, must have the driver's power window switch replaced |
| 10172566 | Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only. |
| 10172561 | Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement driver's airbag inflator only. |
| 10139569 | Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects to the replacement front passengers airbag inflator only. |
| 10139567 | Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects to the replacement driver's airbag inflator only. |
| 10129465 | Service bulletin - Under severe conditions, water or other liquid may enter the driver's window and reach the power window master switch on the door panel. Liquid in the switch can damage the switch?s printed circuit board (PCB), causing the switch to fail. |
| 10128885 | Service bulletin - A manufacturing error can produce over-pressurization of the passenger?s (front) airbag inflator during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants. |
| 10128880 | Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories. |
| 10128879 | Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories. |
| 10128878 | Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories. |
| 10128578 | Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined. |
| 10128577 | Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined. |
| 10128565 | Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a front passenger?s airbag that over time may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants. |
| 10128564 | Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that over time may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants. |
| 10128559 | Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to I |
| 10128531 | Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated. |
| 10124984 | Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a front passenger?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants. |
| 10124983 | Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. |
| 10124982 | Service bulletin - A small number of airbag modules with defective inflators were sold as replacement parts to replace deployed or damaged airbags. A manufacturing error can produce over-pressurization of some replacement driver?s (front) airbag inflators during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing an injury or fatality to vehicle occupants. |
| 10124259 | Service bulletin - A small number of airbag modules with defective inflators were sold as replacement parts to replace deployed or damaged airbags. A manufacturing error can produce over-pressurization of some replacement driver?s (front) airbag inflators during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing an injury or fatality to vehicle occupants. |
| 10120784 | Service bulletin - A manufacturing error can produce over-pressurization of the passenger?s (front) airbag inflator during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants. |
| 10118840 | Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alaba |
| 10118199 | Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a front passenger?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants. |
| 10118198 | Service bulletin - A manufacturing error can produce over-pressurization of the passenger?s (front) airbag inflator during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could be propelled upward toward the windshield, or downward toward the front passenger?s foot well, possibly causing an injury to vehicle occupants. |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Desiccated Air Bag Inflator Rupture
Air Bag Inflator Rupture
Air Bag Inflator Rupture
Low Beam Headlights Stop Illuminating
Low Beam Headlights Stop Working
Driver's Power Window Master Switch
UNDERHOOD FIRES
OIL FILTER FIRES
NHTSA Office of Defects Investigation