Problems owners report
Complaints filed with NHTSA about the 2007 Hyundai Veracruz, by the system named in each complaint. One complaint can name several.
- Engine38
- Electrical system30
- Engine and engine cooling29
- Power train16
- Service brakes15
- Unknown or other15
- Air bags13
- Exterior lighting12
- Electronic stability control (esc)9
- Steering6
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 4 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fatal crashes in the US
From 2020 to 2023, 5 2007 Veracruz vehicles were involved in crashes on US public roads in which someone died; 2 people died inside them, and 3 of the vehicles rolled over. This is a count, not a crash rate: it grows with the number of cars on the road.
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)
New York safety inspections
At its first New York inspection the 2007 Hyundai Veracruz failed the safety check 3.08% of the time — 27% more often than the average 2007 passenger car (2.42%). Median odometer at inspection: 147,062 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Fuel consumption
Official Canadian test results for 1 variant: combined 13.3 L/100 km (about 18 mpg US), CO₂ 306 g/km.
| Variant | City | Highway | Combined |
|---|---|---|---|
| Veracruz 4X4 · Sport utility vehicle · Regular gasoline | 15.5 | 10.6 | 13.3 |
Litres per 100 km. Natural Resources Canada, Fuel consumption ratings (open.canada.ca) · Open Government Licence – Canada
Recalls in Canada
5 Transport Canada recalls for the 2007 Hyundai Veracruz.
| 2020549 13 Nov 2020 | Engine Issue: On certain vehicles, engine oil can leak from the valve cover onto the alternator. If this happens, the charging system could stop working and cause a … |
| 2020233 27 May 2020 | Electrical Issue: Certain vehicles may be equipped with an accessory trailer wiring harness kit that could fail. Over time, this could result in a short circuit that can… |
| 2014297 16 Jul 2014 | Engine This recall was replaced by Transport Canada Recall No. 2020-549. On certain vehicles, engine oil can leak onto the alternator, which could affect charging … |
| 2011333 9 Sept 2011 | Airbag On certain vehicles, the clockspring assembly for the driver's airbag may become damaged and fail. As a result the airbag may not function as intended, and the… |
| 2009120 23 Apr 2009 | Lights And Instruments On certain vehicles, the stop lamp switch may have been incorrectly installed during vehicle assembly. This could prevent proper brake lamp operation. Failure … |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Hyundai Motor America (Hyundai) is recalling certain 2007-2012 Veracruz vehicles that were previously recalled under recall number 14V-415. Oil may leak from the front cylinder bank cover gasket, potentially dripping onto the alternator and causing the charging system to become inoperative.
Hyundai Motor Company (Hyundai) is recalling certain model year 2007-2012 Veracruz vehicles manufactured from December 26, 2006, through July 24, 2012. The affected vehicles may experience an oil leak from the front cylinder bank valve cover gasket. If there is a sufficient amount of oil dropped onto the alternator, the alternator will be damaged causing the charging system to become inoperative.
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2007-2008 HYUNDAI VERACRUZ VEHICLES MANUFACTURED FROM DECEMBER 26, 2006, THROUGH MARCH 21, 2008, AND MODEL YEAR 2007-2008 HYUNDAI SANTA FE VEHICLES MANUFACTURED FROM APRIL 19, 2006 THROUGH MARCH 20, 2008. THE CLOCK SPRING CONTACT ASSEMBLY FOR THE DRIVER'S AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) MAY BECOME DAMAGED THROUGH USAGE OVER TIME. THE DRIVER'S AIR BAG ELECTRICAL CIRCUIT WILL EXPERIENCE A HIGH RESISTANCE CONDITION, POTENTIALLY CAUSING THE DRIVER'S AIR BAG TO NOT DEPLOY.
HYUNDAI IS RECALLING 532,633 MY 2006-2007 ACCENT, ENTOURAGE, SONATA, MY 2007 AZERA, ELANTRA AND SANTA FE, MY 2005-2007 TUCSON AND MY 2007-2008 VERACRUZ VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Hyundai told its dealers about the 2007 Hyundai Veracruz: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10251285 | This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades. |
| 10247189 | This bulletin provides important checkpoint guidelines when performing engine oil and filter change services. |
| 10235566 | Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint. |
| 10230904 | This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation. |
| 10217258 | Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard. |
| 10217251 | Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. |
| 10196577 | The warranty coverage for the clock spring has been extended to 15 years with unlimited mileage from the date of original retail delivery or date of first use, whichever occurs first. This warranty coverage applies to both the original and subsequent owners. Refer to the warranty and service parts information outlined in this bulletin whenever clock spring replacement is required. |
| 10190044 | This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps. |
| 10190038 | This bulletin provides best practice recommendations when performing brake service procedures. |
| 10189989 | This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. |
| 10183963 | This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area. |
| 10183960 | This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin. |
| 10178175 | This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation. |
| 10177599 | These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected. |
| 10177598 | These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected. |
| 10176182 | This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. |
| 10176178 | This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products. |
| 10174808 | This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days. |
| 10174807 | The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: |
| 10173546 | This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products. |
| 10172142 | This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years. |
| 10170883 | This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port. |
| 10169370 | The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to en |
| 10167253 | This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number. |
| 10163866 | This bulletin provides information on the rear wheel speed sensor for Santa Fe (CM), Santa Fe / XL (NC), Santa Fe Sport (AN), and Veracruz (EN) vehicles equipped with front wheel drive (FWD). The rear wheel speed sensor is available as a separate service part from the rear wheel hub assembly. When appropriate, it is recommended to replace only the rear wheel speed sensor instead of the full assembly. |
NHTSA manufacturer communications (public domain)
NHTSA investigations
STOP LAMP SWITCH FAILURE
NHTSA Office of Defects Investigation