Year by year
| Model year | Complaints | Recalls |
|---|---|---|
| 2006 | 0 | 1 |
| 2005 | 0 | 1 |
| 2004 | 0 | 1 |
| 2003 | 0 | 5 |
| 2002 | 0 | 3 |
| 2001 | 0 | 2 |
A model year gets its own page when it has enough data for at least three sections
Fatal crashes in the US
From 2020 to 2023, 10 9100I vehicles were involved in crashes on US public roads in which someone died, and 2 people died inside them. These are counts, not crash rates: a model with more cars on the road shows up more often, and people killed outside the vehicle are not counted here.
| Model year | Vehicles in fatal crashes | Deaths in the vehicle |
|---|---|---|
| 2003 | 4 | 0 |
| 2002 | 3 | 1 |
| 2001 | 1 | 1 |
| 2000 | 2 | 0 |
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain) · how we count
Recalls
5 campaigns cover the 9100I.
Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013, 2016 International LoneStar, 2011-2012, 2016 International 4400, 2017-2024 International LT, 2018-2024 International RH, 2019-2021 International LS, 2019-2024 International MV vehicles. The back-up lights offer low visibility when the vehicle is in reverse and bobtail mode. Also, the vehicles have not been equipped with additional unobstructed back-up lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Navistar, Inc. (Navistar) is recalling certain 2000-2001 International 4700, 2000-2002 4900, 2001-2003 8100 (TranStar) and 9100I, 2002-2003, 2005, 2007-2009, 2012-2014 and 2016-2018 DuraStar, 2012 and 2014-2017 ProStar, 2014-2015 TerraStar, and 2018 LT trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
ON CERTAIN 4X2 AND 6X4 HEAVY DUTY TRUCKS, THE POSITIVE BATTERY CABLE BETWEEN THE BATTERIES AND THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE STARTER AND FRAME RAIL.
ON CERTAIN HEAVY DUTY TRUCKS BUILT WITH A DETROIT ENGINE AND A LEECE NEVILLE ALTERNATOR. THE ELECTRICAL TERMINAL AT THE ALTERNATOR END OF THE CABLE THAT RUNS FROM THE STARTER TO THE BATTERY STUD ON THE ALTERNATOR MAY BREAK OFF, DUE TO VIBRATION IN THE CABLE.
ON CERTAIN HEAVY DUTY TRUCKS, THE BOLTS AND LOCKING NUTS USED TO HOLD THE BRAKE SPIDERS OR BRAKE ANCHOR PLATES TIGHT TO THE AXLES WERE UNDER-TORQUED ON THE RIGHT SIDE OF THE VEHICLES. IF THE CLAMP LOAD ON THE BOLTS IS NOT SUFFICIENT, THE ANCHOR PLATE MAY MOVE WHEN THE BRAKE IS APPLIED IN EITHER THE FORWARD OR REVERSE DIRECTION.
NHTSA recalls