Problems owners report
Complaints filed with NHTSA about the 2025 Mazda CX-50 Hybrid, by the system named in each complaint. One complaint can name several.
- Forward collision avoidance3
- Unknown or other3
- Power train2
- Engine2
- Service brakes2
- Vehicle speed control1
- Electrical system1
- Wheels1
- Structure1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported
Crash-test ratings
NHTSA 5-star results for 1 variant; 1 of 1 rated variants score five stars overall. Rollover risk is the estimated chance of rolling over in a single-vehicle crash.
| Variant | Overall | Rollover risk |
|---|---|---|
| 2025 Mazda CX-50 HYBRID SUV AWD | ★★★★★ | 0.0 % |
- Electronic stability control
- Standard
- Forward collision warning
- Standard
- Lane departure warning
- Standard
- Best overall rating
- 5 / 5
NHTSA New Car Assessment Program (5-Star Safety Ratings), api.nhtsa.gov · US federal work, public domain
Fuel consumption
Official Canadian test results for 1 variant: combined 6.2 L/100 km (about 38 mpg US), CO₂ 145 g/km.
| Variant | City | Highway | Combined |
|---|---|---|---|
| CX-50 Hybrid 4WD · Sport utility vehicle: Small · Regular gasoline | 6.1 | 6.4 | 6.2 |
Litres per 100 km. Natural Resources Canada, Fuel consumption ratings (open.canada.ca) · Open Government Licence – Canada
Recalls
Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.
Mazda North American Operations (Mazda) is recalling certain 2025 CX-50 Hybrid vehicles. The transmission gear shifter can be moved from Neutral to Drive without pressing the brake pedal.
Mazda North American Operations (Mazda) is recalling certain CX-50 Hybrid and CX-50 vehicles. Incorrectly configured module software may cause the air bag to deploy improperly.
Mazda North American Operations (Mazda) is recalling certain 2024-2025 CX-50 vehicles equipped with Mazda Genuine Accessory trailer hitches. The trailer hitch assembly bolts may loosen and cause the assembly to separate from the vehicle body during towing or normal driving conditions.
Mazda North American Operations (Mazda) is recalling certain 2024 Mazda 3, CX-30, and 2025 CX-50 vehicles. A malfunction in the forward sensing camera (FSC) may prevent the automatic emergency braking system and the lane-keep assist system from functioning. In addition, the headlights will not automatically adjust from high beams to low beams as intended.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Mazda told its dealers about the 2025 Mazda CX-50 Hybrid: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011141 | Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions. |
| 11011140 | When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. |
| 11011139 | A customer may complain of a rattle noise from the right side of the dash. The noise may be coming from the passenger side airbag. |
| 11011138 | Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or "\". |
| 11009739 | Beginning with the 2025 model year and onwards, the CX-50 Turbo Models equipped with the Tow Package feature a modified harness connector, which varies by trim level. There will either be 2 or 3 connectors based on the vehicle's trim, as shown in the following images below. This change to 7-pin harness requires supplemental harness kit VC85-V7-78X. |
| 11009662 | On the subject vehicles, the beltline moldings may be detached from the door body, leading to poor appearance. There are only 57 vehicles affected in the USA for this concern. |
| 11009655 | This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure. |
| 11009651 | CX-50 Hybrid service cautions. The CX-50 Hybrid has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. |
| 11009649 | Some customers may complain that a door beltline molding is loose, fell off, or is missing. |
| 11009644 | Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern. |
| 11009639 | Some vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the RAPGARD is removed at PDI. This may be caused by moisture which has been trapped and condensed between the paint and the RAPGARD. These types of stains can be removed with a heat gun or an infrared drier. If you encounter this concern during PDI, use a heat gun or an infrared drier to apply heat to the affected area to remove the stain(s). |
| 11008580 | Mazda Connect Services - Frequently Asked Questions (FAQ) |
| 11008579 | Mazda Connect Services - Frequently Asked Questions (FAQ) |
| 11008578 | When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. |
| 11008577 | Some customers may complain about scratches on the instrument cluster lens. |
| 11008576 | Qi Wireless Charger symptom troubleshooting. |
| 11008575 | Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information. |
| 11008574 | Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs. |
| 11008573 | Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control |
| 11008572 | Alexa Built-In Frequently Asked Questions (FAQ) |
| 11008571 | Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. |
| 11008430 | This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle. |
| 11008428 | The CX-50 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. |
| 11008423 | The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. BSM system indicates vehicle on the opposite side. i-ACTIVSENSE indicator ring will not turn green Rear Cross Traffic Alert (RCTA) does not work Rear side radar sensor aiming may fail TPMS DTC(s) stored |
| 11007029 | For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage. |
NHTSA manufacturer communications (public domain)