Registered new in Europe in 2022
5,229 new Mazda MX-30 cars were registered in the EU, Norway and Iceland in 2022; the largest markets were Germany (1,814), Norway (969), Sweden (824).
- Average mass
- 1,720 kg
- Average CO₂
- 0 g/km (WLTP)
- Average power
- 104 kW
- Fuel type recorded
- Electric 100%
European Environment Agency, CO₂ emissions from new passenger cars · averages weighted by registrations; CO₂ is the type-approval value; fuel type as recorded at registration, where many non-plug-in hybrids appear as petrol · re-use permitted with acknowledgement
In the Netherlands
213 first registered in 2022 are on Dutch roads; 14% arrived later as imports. Median list price when new: €36,600.
Most common APK defects
- Bandenspanning niet op juiste waarde31
- Band onvoldoende profiel15
- Dimlicht onjuist afgesteld14
- Remschijf ernstig gecorrodeerd8
- Ruitenwisserinstallatie geeft onvoldoende zicht7
- Band(en) aanwezig met een profieldiepte van 1,6 t/m 2,5 mm3
- Band beschadigd3
- Gordel beschadigd3
Colours
RDW Open Data: registered vehicles and APK defects (CC0) · defect descriptions in the RDW's Dutch wording
In the United Kingdom
829 cars built in 2022 were licensed for the road at the end of 2025, and 10 more were declared off the road (SORN).
Department for Transport and DVLA, vehicle licensing statistics (table VEH0124, year of manufacture) · Open Government Licence v3.0
In Finland
45 of these cars first registered in 2022 were in use in Finland on 30 Jun 2026, with an average of 43,000 km on the odometer at their last inspection.
Traficom (Finnish Transport and Communications Agency), open data on vehicles in use · CC BY 4.0
In New Zealand
196 2022 cars are on the New Zealand register; 6% arrived as used imports, 94% were sold new in New Zealand.
NZ Transport Agency Waka Kotahi, Motor Vehicle Register (March 2026) · CC BY 4.0
Crash-test ratings
NHTSA 5-star results for 1 variant; 1 of 1 rated variants score five stars overall. Rollover risk is the estimated chance of rolling over in a single-vehicle crash.
| Variant | Overall | Rollover risk |
|---|---|---|
| 2022 Mazda MX-30 5 HB FWD | ★★★★★ | 11.6 % |
- Electronic stability control
- Standard
- Forward collision warning
- No
- Lane departure warning
- Standard
- Best overall rating
- 5 / 5
NHTSA New Car Assessment Program (5-Star Safety Ratings), api.nhtsa.gov · US federal work, public domain
Recalls
No recall campaigns cover the 2022 Mazda MX-30.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Mazda told its dealers about the 2022 Mazda MX-30: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011141 | Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions. |
| 11011140 | When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. |
| 11011138 | Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or "\". |
| 11009655 | This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure. |
| 11009644 | Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern. |
| 11008580 | Mazda Connect Services - Frequently Asked Questions (FAQ) |
| 11008579 | Mazda Connect Services - Frequently Asked Questions (FAQ) |
| 11008578 | When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. |
| 11008577 | Some customers may complain about scratches on the instrument cluster lens. |
| 11008575 | Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information. |
| 11008574 | Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs. |
| 11008573 | Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control |
| 11008571 | Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. |
| 11008568 | Some customers may experience a Telematics Malfunction message in the instrument cluster with DTC U3000:00-TCU (Emergency call unit/telematics communication unit internal malfunction) or U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified. |
| 11008430 | This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle. |
| 11008429 | Symptom 1: Some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. The brake pad has insufficient disc-rust prevention performance, resulting in the disc plate rusting. To eliminate this concern, the pad material has been improved to prevent rust on the disc surface. Symptom 2: Some vehicles may exhibit a squeal noise from the rear brakes when braking lightly while driving at a slow speed. The squeal noise is caused by the disc pad surface fluctuating. To eliminate this concern, the brake pads |
| 11008425 | Some customers may complain that the MyMazda App Remote Engine Start function fails. MX-30 and PHEV vehicles do not have a Remote Engine Start function; instead, they are equipped with the following remote functions: Start / Stop Charge Climate On / Off |
| 11007029 | For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage. |
| 11007027 | Before judging a steering wheel as having premature wear or a defect, first clean the steering wheel as explained in the repair information. Some vehicles may have steering wheel stains caused by chemicals such as hand lotions. |
| 11007022 | Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. |
| 11007019 | If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. |
| 11007018 | Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. |
| 11007013 | Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method |
| 11007009 | Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern. |
| 11006995 | Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. |
NHTSA manufacturer communications (public domain)