11,145,731 US VINs16,875,657 Dutch plates3,603,918 businesses in 233 countries
English
AfrikaansAzərbaycancaBahasa IndonesiaBahasa MelayuCatalàČeštinaDanskDeutschEestiEnglishEspañolFilipinoFrançaisGaeilgeHrvatskiÍslenskaItalianoKiswahiliLatviešuLietuviųMagyarMaltiNederlandsNorskOʻzbekchaPolskiPortuguês (Brasil)Português (Portugal)RomânăShqipSlovenčinaSlovenščinaSrpskiSuomiSvenskaTiếng ViệtTürkçeΕλληνικάБеларускаяБългарскиКыргызчаҚазақшаМакедонскиМонголРусскийУкраїнськаქართულიՀայերենעבריתاردوالعربيةفارسیनेपालीहिन्दीবাংলাதமிழ்සිංහලไทยລາວမြန်မာខ្មែរ한국어日本語简体中文繁體中文
Check a VIN
CarsLore / Nissan / NX / 1991

1991 Nissan NX

6 owner complaints. 1 recall, 22 service bulletins.

6complaints · 1 crashes, 1 fires
1recalls
22manufacturer bulletins
—median mileage at failure

Problems owners report

Complaints filed with NHTSA about the 1991 Nissan NX, by the system named in each complaint. One complaint can name several.

  • Seat belts4
  • Engine and engine cooling2
  • Air bags1

NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 1 injuries and 0 deaths reported

In New Zealand

8 1991 cars are on the New Zealand register; 100% arrived as used imports, 0% were sold new in New Zealand.

NZ Transport Agency Waka Kotahi, Motor Vehicle Register (March 2026) · CC BY 4.0

Recalls in Canada

1 Transport Canada recall for the 1991 Nissan NX.

1997087
22 Apr 1997
Seats And Restraints
IF THE VEHICLE IS OPERATED IN HOT WEATHER, THERE IS A POSSIBILITY THAT THE PLASTIC WELDS SECURING THE REAR SEAT BELT BUCKLE RELEASE BUTTON TO THE SPRING MAY FAI…

Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada

Recalls

97V071000 · Seat belts22 Apr 1997 · 36,000 vehicles

THE RELEASE BUTTON USED IN THE REAR SEAT BELT BUCKLES WERE NOT MADE ACCORDING TO SPECIFICATIONS. IN HOT WEATHER, THE PLASTIC WELDS SECURING THE RELEASE BUTTON TO THE SPRING CAN FAIL RESULTING IN PARTIAL ENGAGEMENT OF THE SEAT BELT TONGUE IN THE BUCKLE OR NOT BEING ABLE TO LATCH THE SEAT BELT.

Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.

NHTSA recalls · summaries in NHTSA's own words

Service bulletins

What Nissan told its dealers about the 1991 Nissan NX: known faults, fixes and updates.

BulletinSummary
603937A REVISED SERVICE PROCEDURE FOR THE ENGINE FRONT COVER / TIMING CHAIN HAS BEEN ADOPTED FOR THE GA16DE. *YC
10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction.
10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10192305SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
10192233Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to,
10192217If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incident
10192216SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. V
10192145SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
10188377STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10051767NISSAN: LOCK/UNLOCK REQUEST BUTTON ON OUTSIDE HANDLE DOES NOT RESPOND. *JS
10032506NISSAN: VENT CONTROL VALVE REPLACEMENT. WHEN REPLACING THE EVAP CANISTER VENT CONTROL VALVE FOR REASON: USE THE ONE LISTED ON PAGE 2; FOR VENT CONTROL VALVE REPLACEMENT PROCEDURE, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUALS (ESM; WHEN INSTALLING THE NEW VALVE, DO NOT ADD ANY LUBE TO ITS O RING; FOR FRONTIER (D40 SERIES) ONLY, INSTALL THE PROTECTOR LISTED IN PARTS INFORMATION. *PE INCLUDES 2005-09 FRONTIER. UPDATED 12/8/10. *PE
10031305NISSAN: TIRE PRESSURE MONITORING SYSTEM (TPMS) WARNING LIGHT ON/FLASHING. NO MODELS OR MODEL YEARS LISTED. *PE UPDATED ON 08-11-2011. *KB
10030165NISSAN: THE 12 VOLT BATTERY IS AN IMPORTANT PART OF THE VEHICLE ELECTRICAL SYSTEM AND IS REQUIRED TO STAY CONNECTED WHEN THE ENGINE IS RUNNING. TO PREVENT DAMAGE TO VEHICLE ELECTRONIC COMPONENTS FOLLOW THE INSTRUCTIONS/CAUTIONS. NO MODEL YEARS LISTED. *PE
10000134NISSAN ESSENTIAL TOOL DRIVE PLATE INSTALLER. *TT

NHTSA manufacturer communications (public domain)