11,145,731 US VINs16,875,657 Dutch plates3,603,918 businesses in 233 countries
English
AfrikaansAzərbaycancaBahasa IndonesiaBahasa MelayuCatalàČeštinaDanskDeutschEestiEnglishEspañolFilipinoFrançaisGaeilgeHrvatskiÍslenskaItalianoKiswahiliLatviešuLietuviųMagyarMaltiNederlandsNorskOʻzbekchaPolskiPortuguês (Brasil)Português (Portugal)RomânăShqipSlovenčinaSlovenščinaSrpskiSuomiSvenskaTiếng ViệtTürkçeΕλληνικάБеларускаяБългарскиКыргызчаҚазақшаМакедонскиМонголРусскийУкраїнськаქართულიՀայերենעבריתاردوالعربيةفارسیनेपालीहिन्दीবাংলাதமிழ்සිංහලไทยລາວမြန်မာខ្មែរ한국어日本語简体中文繁體中文
Check a VIN

1991 Nissan Sentra

63 owner complaints — #27 of 45 Sentra model years. 2 recalls, 25 service bulletins.

63complaints · 8 crashes, 10 fires
2recalls
25manufacturer bulletins
120,000 mimedian mileage at failure

Problems owners report

Complaints filed with NHTSA about the 1991 Nissan Sentra, by the system named in each complaint. One complaint can name several.

  • Seat belts19
  • Fuel system, gasoline10
  • Power train8
  • Electrical system7
  • Service brakes, hydraulic5
  • Engine and engine cooling4
  • Structure3
  • Suspension2
  • Visibility2
  • Seats2

NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 6 injuries and 1 deaths reported

Compared with other years

’82’85’88’91’94’97’00’03’06’09’12’15’18’21’2463’82’85’88’91’94’97’00’03’06’09’12’15’18’21’2463

NHTSA ODI complaints by model year

New York safety inspections

At its first New York inspection the 1991 Nissan Sentra failed the safety check 0.75% of the time — 33% less often than the average 1991 passenger car (1.13%). Median odometer at inspection: 114,562 miles.

133first inspections
0.75%failed on safety
114,562 mimedian odometer
0.0%1.3%2.6%’88’91’93’95’97’99’01’03’05’07’09’11’13’15’17’19’21’23’25’270.8%0.0%1.3%2.6%’88’91’92’95’98’01’04’07’10’13’16’19’22’25’270.8%

NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count

In New Zealand

114 1991 cars are on the New Zealand register; 1% arrived as used imports, 97% were sold new in New Zealand.

NZ Transport Agency Waka Kotahi, Motor Vehicle Register (March 2026) · CC BY 4.0

Recalls in Canada

2 Transport Canada recalls for the 1991 Nissan Sentra.

1995084
24 May 1995
Seats And Restraints
THE (Takata) ABS PLASTIC FRONT SEAT BELT RELEASE BUTTONS ON THESE VEHICLES MAY BREAK ALLOWING PLASTIC PIECES TO FALL INTO THE BUCKLE ASSEMBLY. IF THIS SHOULD HA…
1993004
19 Jan 1993
Emissions
NOTE: VEHICLES WITH 1.6 LITRE ENGINES. THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 1103 -EXHAUST EMISSIONS. E.G.R. VALVE VACUUM HOSE MAY COME LOOSE FROM ONE…

Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada

Recalls

95V103002 · Seat belts24 May 1995 · 2,730,462 vehicles

THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

91V022000 · Seat belts8 Feb 1991 · 165,000 vehicles

IMPROPER BELT GUIDE PERFORMANCE CAN CAUSE FRAYING OF THE SHOULDER SAFETY BELTS NEAR THE RETRACTOR.

Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.

NHTSA recalls · summaries in NHTSA's own words

Service bulletins

What Nissan told its dealers about the 1991 Nissan Sentra: known faults, fixes and updates.

BulletinSummary
603937A REVISED SERVICE PROCEDURE FOR THE ENGINE FRONT COVER / TIMING CHAIN HAS BEEN ADOPTED FOR THE GA16DE. *YC
45792 RECALL INVOLVES REPLACING THE FUEL PUMP IN THE GAS TANK FOR SOME 1991-1993 NISSAN SENTRAS. IF THE FUEL PUMP IS NOT REPLACED IT COULD CAUSE THE CAR TO STALL AND NOT RESTART. *SD
39648 FUEL GUAGE INACCURATE. *TW
39323 1991-94 SENTRA GA16DE SPARK KNOCK. *TW
10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction.
10235729RADIO INTERMITTENTLY REBOOTS DURING AUDIO PLAYBACK VIA BLUETOOTH CONNECTED IPHONE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10192305SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
10192233Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to,
10192217If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incident
10192216SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. V
10192145SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
10188377STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
10178251Expiration Notification Fuel Pump Dealer Announcement ***** Campaign Summary***** In 1993, Nissan launched a Voluntary Service Campaign on certain 1991-1993 Model Year Nissan Sentra (B13) and 1993 Altima (U13) vehicles to inspect and, if necessary, replace the fuel pump. It was determined that the fuel pumps on the subject vehicles may experience accelerated brush wear. Parts specified for this campaign are no longer available through Nissan. This customer service campaign and customer reimbursement for these repairs are no longer available. ***** What Dealers Should Do ***** 1. Serv
10177205VOLUNTARY SERVICE CAMPAIGN SENTRA (B13) AND ALTIMA (U13) FUEL PUMPS Service Campaign ID # 93-U3005 is no longer active. Repair orders opened after this bulletins published date are no longer eligible for reimbursement under Campaign ID # 93-U3005. Discard all previous versions of 93U3005.
10051767NISSAN: LOCK/UNLOCK REQUEST BUTTON ON OUTSIDE HANDLE DOES NOT RESPOND. *JS
10032506NISSAN: VENT CONTROL VALVE REPLACEMENT. WHEN REPLACING THE EVAP CANISTER VENT CONTROL VALVE FOR REASON: USE THE ONE LISTED ON PAGE 2; FOR VENT CONTROL VALVE REPLACEMENT PROCEDURE, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUALS (ESM; WHEN INSTALLING THE NEW VALVE, DO NOT ADD ANY LUBE TO ITS O RING; FOR FRONTIER (D40 SERIES) ONLY, INSTALL THE PROTECTOR LISTED IN PARTS INFORMATION. *PE INCLUDES 2005-09 FRONTIER. UPDATED 12/8/10. *PE

NHTSA manufacturer communications (public domain)

NHTSA investigations

EA95007 · Seat belts:front:buckle assemblyopened 10 Mar 1995 · closed 2 Aug 1995

TAKATA SEAT BELT BUCKLE FAILURE

PE93101 · Vehicle speed control:linkagesopened 30 Nov 1993 · closed 31 Mar 1994

STALLING

NHTSA Office of Defects Investigation