Complaints by model year
Each bar is one model year. The most recent years are still collecting complaints.
NHTSA ODI complaints (public domain) · updated 23 Oct 2026
New York safety inspections
Share of first inspections failed on safety, by model year. Older cars fail more as miles build up, so compare each year with the average car of the same year. Best against its own year: 2005.
NY DMV Vehicle Inspections, initial inspections since Aug 2021 · how we count
Year by year
| Model year | Complaints | Recalls |
|---|---|---|
| 2011 | 0 | 2 |
| 2010 | 0 | 4 |
| 2009 335 | 2 | 3 |
| 2008 335 | 0 | 6 |
| 2007 335 | 0 | 2 |
| 2006 335 | 1 | 2 |
| 2005 335 | 1 | 1 |
A model year gets its own page when it has enough data for at least three sections
Most common problems
- Engine and engine cooling2
- Unknown or other1
- Service brakes, air1
- Power train1
- Engine1
NHTSA ODI complaints, all model years
Fatal crashes in the US
From 2020 to 2023, 23 335 vehicles were involved in crashes on US public roads in which someone died, and 2 people died inside them. These are counts, not crash rates: a model with more cars on the road shows up more often, and people killed outside the vehicle are not counted here.
| Model year | Vehicles in fatal crashes | Deaths in the vehicle |
|---|---|---|
| 2017 | 1 | 0 |
| 2010 | 2 | 0 |
| 2009 | 3 | 1 |
| 2008 | 2 | 0 |
| 2007 | 3 | 0 |
| 2006 | 9 | 1 |
| 2005 | 3 | 0 |
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain) · how we count
Recalls
11 campaigns cover the 335.
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
PACCAR Incorporated (PACCAR) is recalling certain model year 2009-2010 Peterbilt 340, 2010, 2012, and 2015-2016 Peterbilt 337, 2010 Peterbilt 335, 2011-2016 Peterbilt 348, 2009 and 2011-2016 Peterbilt 365, 2009 and 2012-2013 Peterbilt 386, 2009-2015 Peterbilt 388, 2015-2016 Peterbilt 389, and 2015 Peterbilt 567 auto hauler vehicles. The affected trucks are equipped with Michelin 295/60R22.5 XZA-2 front tires that have a speed rating less than the vehicle is governed to.
PETERBILT IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 MODEL 325, 330, 335, 337, 340, AND 348 TRUCKS. THE HOOD ANTI-BLOWDOWN DEVICE IS DESIGNED TO PREVENT UNINTENDED AND UNEXPECTED HOOD CLOSURE. THE DEVICE WITHIN CAN BECOME HINDERED OR INOPERATIVE DUE TO UNINTENTIONAL LATCH MOVEMENT WHICH INTERFERES WITH THE HOOD PIVOT J-HOOK, LATCH MISALIGNMENT, OR LATCH FALLOUT.
PACCAR IS RECALLING MODEL YEAR 2008-2010 KENWORTH T300, T270, AND T370, MODEL YEAR 2009-2010 T800 AND PETERBILT MODEL YEAR 2008-2010 335, 340, AND 367 VEHICLES BUILT ON CUMMINS' DIESEL ENGINE. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN "INHIBIT" MODE WHEN IT IS NOT.
PACCAR IS RECALLING 1,043 MY 2008-2009 KENWORTH C500, T2000,T660, T800 AND W900 TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES.
CERTAIN TRUCKS EQUIPPED WITH EATON SYNFLEX ECLIPSE BRAND EXTRUDED NYLON AIR BRAKE HOSE TUBING FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 106, "BRAKE HOSES." THE TUBING WAS MANUFACTURED WITH ONLY FOUR LAYERS OF NYLON MATERIAL, INSTEAD OF THE SPECIFIED FIVE LAYERS.
ON CERTAIN MEDIUM DUTY VEHICLES, THE RIGHT SIDE STABILIZING ROD, WHICH SPANS THE COOLING MODULE AND THE RIGHT FRAME RAIL BRACKET, WAS INADVERTENTLY DESIGNED TOO CLOSE IN PROXIMITY TO THE ALTERNATOR POSITIVE ELECTRICAL TERMINAL POST. IN THE EVENT THE PROTECTIVE RUBBER BOOT ON THE TERMINAL POST WAS REMOVED OR CRACKED AND THE ENGINE MOUNTS ALLOWED THE ENGINE TO ROCK, ELECTRICAL ARCING COULD OCCUR BETWEEN THE RADIATOR TIE ROD HARDWARE ON THE FRAME SIDE AND THE ALTERNATOR TERMINAL POST WHILE THE ENGINE IS RUNNING.
CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES. THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
ON SOME PETERBILT TRUCKS, CERTAIN PARTS USED IN THE AIR SUSPENSIONS HAVE A HIGH COPPER CONTENT CAUSING PREMATURE FAILURE.
CERTAIN VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS (ABS)." THE INDICATOR LIGHT THAT NOTIFIES THE DRIVER OF A MALFUNCTION IN THE TRAILER ABS WAS NOT INSTALLED AS REQUIRED.
ON CERTAIN TRUCKS EQUIPPED WITH HYDRAULIC BRAKES, THERE MAY BE A DEFECT IN THE ANCHOR BOLT OF SOME BOSCH MODEL #305 PARKING BRAKE ASSEMBLIES. A DIFFERENT COATING WAS APPLIED TO THE BOLT WHICH DID NOT MEET PACCAR SPECIFICATIONS. THIS COULD REDUCE THE FATIGUE LIFE OF THE BOLT AND LEAD TO PREMATURE FAILURE.
NHTSA recalls