Ford F-650

Ford Motor Company (Ford) is recalling certain 2020-2022 F-Super Duty F250, F350, F450, F550, F600, and 2021-2022 F-650, F750 vehicles. Biodiesel deposits may form on the pump drivetrain roller components, which could lead to failure of the high pressure fuel pump.

Ford Motor Company (Ford) is recalling certain 2021 Super Duty F-250, F-350, F-450, F-550, F-600, and Medium Duty F-650 and F-750 vehicles equipped with 6.7L diesel engines. A small void may be present in the top-center of the vehicle's underhood secondary fuel filter cap, which may progress to a pinhole over time, allowing fuel to leak from the top of the secondary fuel filter.

Ford Motor Company (Ford) is recalling certain 2021 F-650 and F-750 vehicles equipped with 7.3L gas engines. The transmission oil cooler line may contact the air conditioning compressor pulley, possibly causing a transmission fluid leak.

Phenix Enterprises, Inc. (Phenix) is recalling certain model year 2009 and 2011 trucks manufactured from July 22, 2008, through December 16, 2011, equipped with a Sure Power battery separator, part number 16511893 (model 1314). Suspect vehicles, in their as-built configuration, had a Sure Power battery separator installed on the inboard side of the curb side rail. These battery separators may overheat.

FORD IS RECALLING CERTAIN MODEL YEAR 2012 F-650 AND F-750 VEHICLES MANUFACTURED FROM FEBRUARY 1, 2012 THROUGH MARCH 16, 2012. THE CLEAR AND BLACK PRIMER MAY BE MISSING ON CERTAIN WINDSHIELDS WHICH MAY RESULT IN AN INSUFFICIENT BOND BETWEEN THE GLASS AND CAB STRUCTURE.

FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-650 AND F-750 TRUCKS, MANUFACTURED FROM DECEMBER 3, 2010, THROUGH DECEMBER 20, 2011, EQUIPPED WITH BENDIX ATR-6 ANTILOCK TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.

LDV IS RECALLING 81 TRUCKS BUILT ON CHEVROLET AND FORD MY 2007-2009 C5500, MY 2008-2009 W5500, AND MY 2008 F-650 CHASSIS SPECIFICALLY FOR SNAP-ON TOOLS FOR USE AS A MOBILE SUPPLY COMPANY. THERE MAY BE A CABLE INSTALLED ON THE BATTERY ISOLATOR WITH THE BODY OF THE CABLE LUG FACING THE ISOLATOR. WITH ALL CABLES TIGHTENED DOWN ON THE STUD, THIS CABLE LUG MAY BE PRESSED AGAINST THE COOLING FINS OF THE ISOLATOR, WHERE CONTACT POSES A RISK OF ELECTRICAL SHORT WHICH COULD RESULT IN CABLES OVERHEATING.

KNAPHEIDE IS RECALLING 108 MY 2006-2008 PRO SERIES TRUCK BEDS EQUIPPED WITH AN ICC BUMPER WHICH INCLUDED A PROVISION FOR A BALL HITCH. THERE MAY BE AN INSUFFICIENT WELD ATTACHING THE HITCH CHANNEL TO THE SUPPORTING STRUCTURE.

CERTAIN MEDIUM DUTY PICKUP TRUCKS EQUIPPED WITH AIR BRAKES THAT INCLUDE THE OPTIONAL TRAILER PACKAGE FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 121, "AIR BRAKE SYSTEMS." THE AIR BRAKE LINES CONNECTED TO THE TRACTOR PROTECTION VALVE ARE MISROUTED.

VEHICLE DESCRIPTION: PASSENGER CARS, SPORT UTILITY VEHICLES, AND LIGHT AND MEDIUM DUTY PICKUP TRUCKS. A SWITCH LOCATED IN THE PLASTIC COVER OF THE WIPER MOTOR GEAR CASE COULD MALFUNCTION AND OVERHEAT, POTENTIALLY RESULTING IN LOSS OF INTERMITTENT WIPER FUNCTION, LOSS OF WIPER PARK FUNCTION, COMPLETE LOSS OF WIPER FUNCTION, OR IGNITION OF THE PLASTIC COVER MATERIAL. SWITCH MALFUNCTION IS MOST LIKELY TO OCCUR WHEN THE INTERMITTENT SETTING OF THE WIPERS IS BEING USED, OR WHEN SNOW OR ICE OBSTRUCTS THE BLADES FROM RETURNING TO THE "PARKED" POSITION AT THE BOTTOM OF THE WINDSHIELD. THESE VEHICLES WERE BUILT AT THE FOLLOWING ASSEMBLY PLANTS: ATLANTA PLANT FROM 2/11/00 THROUGH 7/31/00; CHICAGO PLANT FROM 2/14/00 THROUGH 8/4/00; KANSAS CITY PLANT FROM 2/26/00 TO 9/4/00; KENTUCKY TRUCK PLANT FROM 2/18/00 TO 8/31/00; MICHIGAN TRUCK PLANT FROM 2/23/00 THROUGH 8/3/00; NORFOLK PLANT FROM 2/21/00 THROUGH 7/27/00; WAYNE STAMPING AND ASSEMBLY PLANT FROM 2/25/00 THROUGH 8/15/00; AND WIXOM PLANT FROM 2/15/00 THROUGH 8/8/00.

VEHICLE DESCRIPTION: TRUCKS EQUIPPED WITH DRAG LINK ASSEMBLIES CONTAINING 24-DL MODEL BALL SOCKETS AND MANUFACTURED BY TRW. CERTAIN OF THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW-SPECIFICATION CASE DEPTH AND/OR HARDNESS, WHICH CAN LEAD TO PREMATURE WEAR OF THE SOCKET.

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU), THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.