Ford Mustang

Corrosion of the front seatbelt pretensioner cable may cause it to weaken or break, reducing seatbelt effectiveness and increasing the risk of injury in a crash. The product does not comply with the Regulation on the approval and market surveillance of motor v…

The wrong software for the power steering control module (PSCM) may have been installed. The steering wheel can perform autonomous movements when the driver attempts to steer, as the electric power steering (EPAS) provides unintended steering assistance. Unint…

The incorrect calibration of the power steering control module (PSCM) could lead the steering wheel to oscillate without warning (alternating clockwise/counterclockwise) during steering due to the electric power-assisted steering (EPAS) providing unintended st…

An unsecured nut may cause the clutch pedal to fail, preventing the driver from changing gear and causing the engine to stall. If the clutch line is lowered, it may melt on hot components and brake fluid may leak and ignite. The product does not comply with th…

As a result of a polarity error in the secondary digital torque sensor in the steering gear, if the primary steering torque sensor fail, the steering wheel may oscillate when the driver is steering. This can lead to a loss of vehicle control while driving, inc…

The front passenger's knee airbag may malfunction, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical un…

The brake-pedal support bracket may not be sufficiently robust and could break in the event of very hard emergency braking.This may lead to a loss of braking performance, increasing the risk of an accident.

The ammonium nitrate propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airba…

The battery wiring harness in the engine compartment may have been incorrectly installed, potentially causing the battery cable to contact the exhaust manifold. Contact could result in non start, smoke from the engine compartment and may lead to fire.

The door locks on both side doors are defective. The doors may open while the car is in motion.

In the event of deployment, the front driver side air bag inflator housing may rupture, resulting in metal fragments striking the driver or other occupants.

Ford Motor Company (Ford) is recalling certain 2026 Explorer, Bronco, Bronco Sport, Mustang, and Ranger vehicles. The engine piston domes may have been manufactured incorrectly, which can result in piston dome failure and lead to a loss of drive power.

Ford Motor Company (Ford) is recalling certain 2024-2026 Mustang vehicles. The engine compartment wiring harness ground connections may fracture and result in a loss of drive power, or a loss of function in the windshield washing system, headlights, air conditioning, or engine cooling fan. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 108, "Lamps, Reflective Devices, and Associated Equipment," and 104, "Windshield Wiping and Washing Systems."

Ford Motor Company (Ford) is recalling certain 2024-2026 Mustang and 2025-2026 Mustang GTD vehicles. During certain cold temperature conditions, the windshield wipers may function only at their high-speed setting and the washing system may fail to function properly.

Ford Motor Company (Ford) is recalling certain 2019 Ford Mustang, Lincoln Nautilus, and Lincoln Navigator vehicles previously repaired incorrectly under recall number 19V076. At vehicle start-up, the Instrument Panel Cluster Assembly (IPC) may not function, showing a blank display. As a result, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Controls and Displays."

Ford Motor Company (Ford) is recalling certain 2026 Explorer and Mustang vehicles. The engine piston circlips may have been incorrectly installed during manufacturing, which can result in piston failure and engine damage, leading to a loss of drive power.

Ford Motor Company (Ford) is recalling certain 2025 Ranger, Lincoln Nautilus, Mustang, Maverick, Explorer, Escape, Lincoln Corsair, Bronco Sport, and Bronco vehicles. The exhaust gas recirculation (EGR) valve may fail, resulting in an unexpected loss of drive power.

Ford Motor Company (Ford) is recalling certain 2026 Explorer, Mustang, Lincoln Corsair, and 2025 Maverick vehicles. The cylinder head may have been improperly manufactured, which can cause the ball plugs to fail, resulting in an oil leak.

Ford Motor Company (Ford) is recalling certain 2015-2019 Flex, 2015 Explorer, Lincoln MKT, Lincoln MKZ, 2015-2016 C-Max, Escape, Taurus, 2016 Fusion, 2018-2019 Taurus, 2019 Lincoln MKT, Fiesta, and 2020 Mustang vehicles. The rearview camera may display a distorted, intermittent, or blank image when the vehicle is in reverse.

Ford Motor Company (Ford) is recalling certain 2021-2023 Mustang vehicles repaired incorrectly under recall number 23V727. The brake fluid level sensor may not activate the visual warning indicator when the brake fluid is low. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. Water and road salt may corrode the front seat belt anchor pretensioner cables.

Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.

Ford Motor Company (Ford) is recalling certain 2024-2025 Mustang, and Mustang GTD vehicles. Water may enter the body control module and cause a loss of communication with the exterior lighting, including the license plate light, side marker, and tail lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."