New York safety inspections
At its first New York inspection the 2018 International Workstar failed the safety check 0.51% of the time — 69% less often than the average 2018 passenger car (1.65%). Median odometer at inspection: 45,795 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Recalls in Canada
8 Transport Canada recalls for the 2018 International Workstar.
| 2023212 6 Apr 2023 | Heater And Defroster Issue: On certain trucks, a wire terminal for the blower motor circuit breaker in the power distribution module (PDM) could overheat and melt. Safety Risk: … |
| 2021300 19 May 2021 | Fuel System Issue: On certain trucks, the fuel rail assembly could develop a leak. Note: This recall only affects trucks equipped with a Cummins L9 or ISX12 diesel engi… |
| 2020643 23 Dec 2020 | Powertrain Issue: On certain trucks equipped with an automatic transmission, when the engine RPM increases for the stationary power take off (PTO), it can overcome the p… |
| 2020163 16 Apr 2020 | Fuel System Issue: On certain vehicles equipped with a Cummins B6.7 diesel engine, the electric fuel heater could overheat and melt. Note: This recall replaces Transpor… |
| 2019592 21 Nov 2019 | Powertrain Issue: On certain trucks equipped with an automatic transmission, when the engine RPM increases for the stationary power take off (PTO), it can overcome the p… |
| 2019148 20 Mar 2019 | Fuel System Note: This recall is replaced by recall 2020-163. Please click here for more information. Issue: On certain vehicles equipped with a Cummins B6.7 diesel e… |
| 2018638 20 Nov 2018 | Powertrain On certain vehicles equipped with an electronic clutch actuator (ECA), the clutch may have been manufactured improperly and could fail. If this occurs, the brok… |
| 2018232 3 May 2018 | Seats And Restraints On certain vehicles, the seat belt D-ring mounting bolts may break due to a material defect. If this occurs, the seat belt may not properly restrain the seat o… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Navistar, Inc. (Navistar) is recalling certain 2016-2017 International TranStar, 2017-2019 International ProStar, International LoneStar, 2017-2020 International DuraStar, WorkStar, and 2018-2019 IC Bus HC Commercial buses. The heating, ventilation, and air-conditioning (HVAC) blower motor circuit may have an insufficient wiring terminal that can overheat.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, International DuraStar, 2019-2021 International HV, International MV, and IC Bus RE Commercial Bus vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Navistar, Inc. (Navistar) is recalling certain 2019-2021 International MV, 2020-2021 International HV, 2014-2020 International DuraStar and 2015-2018 International WorkStar vehicles. When the parking brake is applied and the automatic transmission is still in the drive or reverse position and the stationary PTO switch is engaged by the operator, the engine may rev and overcome the parking brake's ability to keep the vehicle from moving.
Navistar, Inc. (Navistar) is recalling certain 2017-2020 International WorkStar and International DuraStar, 2018-2019 IC 1300 FBC Commercial and IC HC Commercial, 2018-2021 IC CE Commercial, International MV and International HV, and 2019-2021 IC TC Commercial buses with Cummins B6.7 diesel engines with a fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling.
Navistar, Inc. (Navistar) is recalling certain 2019-2020 International MV and HV, 2018-2020 Workstar, and 2018-2019 Durastar vehicles equipped with feature codes 12VXT and 12VXU. With the parking brake applied and the automatic transmission in the 'Drive' or 'Reverse' position, when the stationary PTO switch is engaged by the operator, the engine RPM will ramp up and may overcome the parking brake's ability to hold the vehicle.
Custom Fab & Body LLC (Custom Fab & Body) is recalling certain 2018 Ford F-650 XLT Crew Cab, 2017-2018 International 7500 4x4, and 2018 International 7500 4x2, Freightliner M2-112 and M2-106, and Kenworth T-370-based emergency vehicles equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Navistar, Inc. (Navistar) is recalling certain 2017-2020 International DuraStar and WorkStar, 2018-2020 IC Bus CECB, International HV and MV, 2018-2019 IC Bus 1300 FBC and HCCB, and 2019-2020 IC Bus TCCB vehicles equipped with Cummins B6.7 diesel engines with fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling.
Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, DuraStar, LoneStar, LT, ProStar, RH and IC Bus HC, 2018 International TranStar, 2019 International HV and MV trucks and transit buses. The front driver and passenger seat belt anchor D-ring bolt may break in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What International told its dealers about the 2018 International Workstar: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11010428 | This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean. |
| 10253970 | This document details the procedure that must be followed to ensure proper alternator troubleshooting. |
| 10251414 | Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine. |
| 10251409 | Suggested alignment target values when performing a vehicle axle alignment. |
| 10246231 | J1939 Data Link Source Address Information |
| 10244926 | Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present. |
| 10243610 | How to request a horsepower quote; all International and Cummins engines |
| 10243601 | Cummins B6.7 Grid Heater Relay |
| 10243596 | General Wheel Speed Sensor Troubleshooting |
| 10243595 | Diagnosis of chassis wander complaints. |
| 10243594 | Certain International N13 engines may be noncompliant to the required On Board Diagnostics (OBD) Monitor, Manufacturers Self-Test (MST) for over-boost, Exhaust Gas Recirculation (EGR) low flow, and EGR high flow monitors. Under certain conditions, this noncompliance may result in the failure to detect an increase in regulated air pollutants. |
| 10241555 | J1939 Data Link Source Address Information |
| 10241554 | J1939 Data Link Troubleshooting |
| 10240193 | Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines |
| 10238858 | QLS Emergency Calibration Revert Process |
| 10237468 | New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines |
| 10237462 | QLS Emergency Calibration Revert Process |
| 10237447 | Per agreement with EPA and CARB, Cummins, Inc. provided an emergency calibration for Cummins ISB, B6.7, ISL9, L9, and X15 engines when a DEF Quality Sensor (DQS) was not available. This action addressed the Diesel Exhaust Fluid (DEF) Quality Sensor failures in the field and the unavailability of parts due to the worldwide chip shortage. This recall is step two of this program designed to revert all affected vehicles back to the certified calibration and to provide them with the latest improved DQS and Coolant Control Valve (CCV) designs. Additionally, the emergency calibration and the resto |
| 10236042 | New Air compressor Incorporates an oil feed dowel O-ring; only models built with MaxxForce 11/13, N13, or A26 Engines |
| 10234021 | Rebuilding cylinder heads on certain EPA 2010 MaxxForce 11/13, N13, and A26 Engines |
| 10234015 | Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines |
| 10234007 | Telematics installation guidelines - Only units with 500K data link |
| 10234000 | Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions |
| 10232616 | Rebuilding Cylinder Heads on Certain International MaxxForce 11/13 engines and all International N13 and A26 engines |
| 10231068 | QLS Emergency ECM Calibration; only models equipped with Cummins B6.7, X15, L9, or International A26 engines |
NHTSA manufacturer communications (public domain)