Recalls
Mack Trucks Inc. (Mack) is recalling one 2014 Pinnacle (CXU) vehicle and certain 2018-2019 Mack Anthem (AN) vehicles equipped with air brake supply tanks that have an air volume amount ranging from 70% to 96% of the amount required by the regulation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.
Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2014 Pinnacle (CHU and CXU) trucks manufactured September 10, 2010, to June 17, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.
Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 Pinnacle (CXU) trucks manufactured from October 3, 2012, through February 18, 2014 and equipped with Meritor air disc brakes. In the affected vehicles, the brake chambers may have been incorrectly mounted resulting in internal contamination of the air brake calipers.
Mack Trucks, Inc (Mack) is recalling certain model year 2012-2015 CXU trucks manufactured February 4, 2011, to December 23, 2014, and equipped with an air release fifth wheel latch. The affected vehicles have a switch to release the fifth wheel latch that may invertently be pushed and cause the trailer to unintentionally disconnect from the tractor after the parking brake has been released.
Mack Trucks, Inc. (Mack) is recalling certain model year 2014-2015 CXU trucks manufactured June 1, 2013, to November 28, 2014. These trucks may be equipped with an 88 liter air reservoir for the brakes instead of a 96 liter air reservoir. The lower volume of air may result in increased distances being needed to stop the truck. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems."
Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 CXU and 2014-2015 CHU trucks manufactured August 23, 2012, through June 27, 2014, and equipped with adaptive cruise control. Due to a software error, the affected vehicles may not provide visual or audible alerts to the driver warning them that an obstruction in the road was detected.
Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
Mack Trucks Inc. (Mack) is recalling certain model year 2010-2015 CXU trucks manufactured November 20, 2009, through January 27, 2014, and equipped with dual vertical exhaust pipes. The white conspicuity reflectors on the rear of the cab could be blocked by the exhaust pipes. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Mack Trucks Inc. (Mack) is recalling certain model year 2014-2015 CXU trucks manufactured February 1, 2013, through January 27, 2014, and equipped with a vertical wet tank (aka supply air tank) for the brake system. The pressure relief valve may not have been installed in the tank during manufacturing.
Mack Trucks Inc. (Mack) is recalling certain model year 2014-2015 CXU, 2010-2015 LEU, and 2011-2015 MRU vehicles manufactured with certain Cummins Westport Model ISL G and ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.
Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
Mack Trucks, Inc. (Mack) is recalling certain model year 2014 CXU tractor trailers manufactured June 21, 2013, through October 4, 2013 and equipped with an automatic over-speed protection system. In the affected vehicles, the protection system, designed to monitor diesel engine speed and shutdown the engine should it rev excessively, may be wired incorrectly and may not operate as designed.
Mack Trucks, Inc. (Mack) is recalling certain model year 2014 CXU and MRU trucks manufactured August 12, 2013, through October 9, 2013 and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."
Mack Trucks is recalling certain model year 2014 CXU and GU model vehicles manufactured May 10, 2013, through June 12, 2013. The upper and lower steering shaft pinch bolts may have not been torqued to specification. This may cause the steering shaft to come loose.
Mack Trucks is recalling certain model year 2013-2014 CHU, CXU, GU, LEU, and MRU vehicles manufactured with pro-torque axle spindle nuts from August 28, 2012, through August 16, 2013. The pro-torque nut may not have been installed correctly, which may result in a loosening of the nut.
Mack Trucks, Inc. is recalling certain model year 2013-2014 CHU, CXU, GU, MRU, and LEU trucks manufactured July 16, 2012, through march 18, 2013 and equipped with drum brakes. The clevis pin for the brake slack adjuster may be missing a cotter pin. If the cotter pin is not installed, the clevis pin may loosen and fall out causing a loss of brake function on the affected wheel.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Mack told its dealers about the 2014 Mack Pinnacle (cxu): known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10253804 | CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran. |
| 10251333 | CBR -Telematics Gateway (TGW) Connect Ability Issues |
| 10251331 | CBR - Active "Set Park Brake" Message On Drivers Information Display (DID). |
| 10251329 | CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft. |
| 10251328 | CBR - Driveline Noise, Suspension Ride Height Too High, Suspension Will Not Exhaust - Chassis Built 2016w01 And Newer. |
| 10249553 | CBR: TGW Will Not Connect After SIM Card Replacement |
| 10246086 | TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft. |
| 10244819 | CBR: Telematics Gateway ( TGW, MID 142 ) Losing Communication With The Instrument Cluster ( IC ) - Counts Of Fault Code (FC) MID 140 PSID 239 FMI 12 Data Link, MID 142 Faulty Device or Component Logging, Possibly Following Engine Start. |
| 10243453 | TSB: Aftertreatment Diesel Exhaust Fluid (DEF) Tank, Level Sensor, Replacement |
| 10241946 | TSB: Barksdale Leveling Valve, Leak Test |
| 10241945 | TSB: Air Restriction Indicator |
| 10240202 | CBR: Mack DEF Dosing Valve Diagnostic Trouble Codes (DTC) P202D00, P208E00, P103B00 - US10+OBD13 And Newer Emissions |
| 10237351 | CBR: Automated Manual Transmission ( AMT ) -Transmission Electronic Control Unit ( TECU ) MID130 PSID 29 FMI 7 /P10AE81 Fault Codes Being Generated |
| 10237348 | CBR: Automated Manual Transmission (AMT) Transmission Kickdown Mode |
| 10237342 | CBR: Diagnostic Trouble Code (DTC) P215A-64, Fault Code SPN 84 FMI 19 |
| 10235490 | TSB: Vibration Diagnostics |
| 10235489 | TSB: Stock Vehicle Storage and Maintenance |
| 10235486 | TSB: New Vehicle Safety Certification Requirements for Vehicles, U.S. and Canada |
| 10233505 | Mack Chassis - TerraPro (MRU) And Low Entry (LEU) Models - Field Service Bulletin FSB 381-042, Warning Light Bar (WLB) Replacement and Software Conversion Kit - US07, US10, US10+OBD13, US14+OBD13 To US14+OBD16 Emissions, Model Years 2008 To 2017 |
| 10232609 | Mack Chassis - No Gauge Cluster Backlight |
| 10232608 | Mack DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions |
| 10225625 | Mack Chassis - Fault Code List / Engine Control Module (ECM), Aftertreatment Control Module (ACM), Electrical System Version 4 Diagnostic Trouble Codes (DTC) Model Year 2013 - 2017 |
| 10222608 | TSB-Charge Air Cooler t-clamp install. |
| 10219082 | 2009 Document reformatted to be published as a TSB in Impact. Axle Carrier Pinion Angles |
| 10219081 | 2009 Document reformatted to be published as a TSB in Impact. Axle Alignment Specifications |
NHTSA manufacturer communications (public domain)
NHTSA investigations
mDrive Transmission Failure to Disengage
NHTSA Office of Defects Investigation