Mack Pinnacle (cxu)

Mack Trucks, Inc. (Mack) is recalling certain 2021-2022 Anthem, Granite, and Pinnacle vehicles. The hubcap compression spring can cause the hubcap to separate.

Mack Trucks, Inc. (Mack) is recalling certain 2018-2022 Anthem (AN), Granite (GR/GU), and Pinnacle (CHU/CXU/PI) vehicles equipped with "camelback" rear suspension and electronic stability control. The vehicles may not stay in their lane at certain speeds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 136, "Electronic Stability Control Systems on Heavy Vehicles."

Mack Trucks, Inc. (Mack) is recalling certain 2015 Pinnacle (CXU) vehicles equipped with Meritor FF967 Non Drive Front Steer Axles. The axles missed the heat treating operation during manufacturing, reducing their strength and possibly causing the axle beams to fracture.

Mack Trucks, Inc. (Mack) is recalling certain 2020 Anthem and Pinnacle trucks. The conspicuity reflectors at the back of the cab may be blocked by the exhaust system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Assoc. Equipment."

Mack Trucks Inc. (Mack) is recalling one 2014 Pinnacle (CXU) vehicle and certain 2018-2019 Mack Anthem (AN) vehicles equipped with air brake supply tanks that have an air volume amount ranging from 70% to 96% of the amount required by the regulation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Mack Trucks, Inc. (Mack) is recalling certain 2019-2020 Mack Anthem, Granite, Pinnacle vehicles. The passenger side door down view mirror may detach from the door.

Mack Trucks, Inc. (Mack) is recalling certain 2018 Anthem (AN) and Pinnacle (CXU) vehicles, equipped with an automated manual transmission. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

Mack Trucks, Inc. (Mack) is recalling certain 2018 Anthem (AN), Granite (GU), and Pinnacle (CXU, PI) trucks. An electrical overload condition may cause the light control module (LCM) to fail, resulting in the loss of the exterior lighting, interior dashboard lighting, and the windshield wipers.

Mack Trucks, Inc. (Mack) is recalling certain 2016 Pinnacle CHU and CXU diesel trucks equipped with certain Dana steer axles. The castellated nut and cotter pin on the steer axles may not have been properly torqued, allowing the tie rod to loosen within the steer axle.

Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.

Mack Trucks, Inc. (Mack) is recalling certain model year 2017 Pinnacle CHU and CXU trucks manufactured March 9, 2016, to May 19, 2016 and equipped with Goodyear G399A LHS 295/75R22.5 LRG tires. The tires on the affected vehicles may have cured improperly causing an incomplete adhesion, possibly resulting in a partial tread separation.

Mack Trucks, Inc. (Mack) is recalling certain model year 2013 Pinnacle (CXU) trucks manufactured April 16, 2012, to May 4, 2012. These vehicles are equipped with certain Meritor FF967 non-drive front steer axles that may have been incorrectly heat treated.