Recalls in Canada
2 Transport Canada recalls for the 2008 Pierce Enforcer.
| 2011173 27 Apr 2011 | Engine On certain fire trucks, after repeated use with excessive force, the accelerator pedal arm may bend and cause the foot pedal to move closer to the floor. If th… |
| 2010319 21 Sept 2010 | Steering On certain vehicles equipped with a non-independent front suspension, the steering gear bracket may fracture and break. If this occurs the steering gear may de… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Pierce Manufacturing (Pierce) is recalling certain 2004-2018 Arrow XT, Dash, Enforcer, Impel, Quantum and Velocity aerial vehicles. The aerial device may unexpectedly rotate to the right when the ladder is being extended.
Pierce Manufacturing (Pierce) is recalling certain 2007-2017 Pierce Velocity, Impel, Arrow-XT, Quantum, and Enforcer emergency response vehicles equipped with 75ft aerial devices with a 21 inch or 28 inch limited retraction bracket. The bracket on the aerial device may detach from the aerial and fall to the ground.
Pierce Manufacturing (Pierce) is recalling certain 1999-2013 Arrow XT, Dash, Enforcer, Quantum and Velocity fire trucks equipped with the electric All-steer rear steering option. The affected vehicles have rear steer axle shafts that were not properly heat treated.
Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
PIERCE IS RECALLING CERTAIN MODEL YEAR 1999-2008 ARROW XT, DASH, LANCE, AND ENFORCER FIRE APPARATUS MANUFACTURED FROM JUNE 22, 1999, THROUGH MAY 12, 2008, AND EQUIPPED WITH AN ELECTRONIC ACCELERATOR PEDAL. AFTER REPEATED USE WITH EXCESSIVE FORCE, THE ACCELERATOR PEDAL ARM MAY BEND AND CAUSE THE PEDAL TO MOVE CLOSER TO THE FLOOR. IF THE PEDAL ARM BENDS FAR ENOUGH, THE PEDAL MAY CONTACT THE CAB FLOOR WITHOUT WARNING AND STICK IN THE FULL THROTTLE POSITION.
PIERCE IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2008 ARROW XT, LANCE, VELOCITY, ENFORCER, IMPEL, AND DASH CUSTOM FIRE APPARATUS VEHICLES MANUFACTURED FROM MAY 30, 1998 THROUGH NOVEMBER 25, 2008. THE STEERING GEAR BRACKET MAY FRACTURE AND BREAK. IF THIS OCCURS THE STEERING GEAR MAY DETACH FROM THE VEHICLE.
PIERCE IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2010 ARROW XT, DASH, ENFORCER, IMPEL, QUANTUM, AND VELOCITY FIRE TRUCKS MANUFACTURED FROM OCTOBER 11, 2006 THROUGH JUNE 16, 2010 AND EQUIPPED WITH MERITOR WABCO EX225 REAR DISC BRAKES AND ONSPOT AUTOMATIC TIRE CHAINS. THE MERITOR WABCO EX225 REAR DISC BRAKE CALIPER MAY INTERFERE WITH THE ONSPOT AUTOMATIC TIRE CHAIN BRACKETS. THIS INTERFERENCE MAY RESTRICT THE CALIPER FROM FULL MOVEMENT.
PIERCE IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2009 CUSTOM CONTENDER, DASH, ENFORCER, IMPEL, LANCE SABER, AND VELOCITY FIRE TRUCKS MANUFACTURED FROM FEBRUARY 20, 2003, THROUGH MARCH 27, 2009. THESE TRUCKS MAY BE EQUIPPED WITH DROP-DOWN FIRE HOSE TRAYS MOUNTED UNDER THE FRONT BUMPER. THE HOSE TRAY LATCH MAY ACCIDENTALLY OPEN WHILE THE VEHICLE IS IN MOTION.
PIERCE IS RECALLING 15 MY 2007-2008 DASH, ENFORCER, IMPEL, QUANTUM AND VELOCITY FIRE TRUCKS EQUIPPED WITH ARVINMERITOR REAR DISC BRAKES AND HENDRICKSON FIREMAAX SUSPENSION. INTERFERENCE WITH THE BRAKE CALIPER ADJUSTER BOLT SLEEVE AND THE SUSPENSION BEAM MAY OCCUR. THIS INTERFERENCE MAY OCCUR IF THE RIGHT HAND AND LEFT HAND BRAKE COMPONENTS WERE ASSEMBLED ON THE WRONG SIDE OF THE AXLE. THE ADJUSTER BOLT IS DESIGNED TO ROTATE AS THE BRAKE PADS WEAR. IF THE SLEEVE BECOMES DAMAGED, THE SLEEVE MAY PREVENT THE ADJUSTER FROM ROTATING.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Pierce told its dealers about the 2008 Pierce Enforcer: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011818 | This bulletin is to support the dealer network when replacing a ASL 360 ECU that requires programming on the truck. |
| 11011817 | Software update for fault codes on Command Zone display: This software update may help remove ambiguity between active and inactive engine error codes shown on the Command Zone display. |
| 11008386 | All Roto Rays are warranted to the purchaser for twenty-four months from the date of service against defects in material or workmanship. During the warranty period products found to be defective will be repaired or replaced (at Roto Rays option) without charge. The defective light must be returned to Roto Rays, INC., 722 Park Ave., Herndon, VA 20170. The light will be returned to the purchaser prepaid. |
| 11008381 | Provide alternate solution if door linkage rods (between inner door handle) and the door latch release from the rod lock. This alternate solution is a cable operated system and may require higher than normal pull force to unlatch the door from the inside. |
| 11004156 | Cab insulation upgrades are available as a product enhancement to provide additional support for the HVAC system during periods of excessive heat. |
| 10240750 | Addressing fault codes and upgrades to the Midwest Climate Control (MCC) HVAC system. |
| 10230841 | Addressing fault codes and upgrades to the MCC HVAC system. |
| 10209510 | The lower coolant tube clamp bracket (Pierce P/N 2953062) has been redesigned and older versions should be replaced with Pierce P/N 4107662. |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Williams Controls Accelerator Pedals
NHTSA Office of Defects Investigation