Complaints by model year
Each bar is one model year. The most recent years are still collecting complaints.
NHTSA ODI complaints (public domain) · updated 23 Oct 2026
Year by year
| Model year | Complaints | Recalls |
|---|---|---|
| 2016 | 0 | 0 |
| 2015 | 0 | 0 |
| 2014 VT | 0 | 1 |
| 2013 VT | 0 | 1 |
| 2012 VT | 1 | 1 |
| 2011 VT | 0 | 1 |
| 2010 VT | 0 | 4 |
| 2009 VT | 0 | 5 |
| 2008 VT | 0 | 11 |
| 2007 VT | 1 | 9 |
| 2006 VT | 1 | 1 |
| 2005 VT | 0 | 3 |
| 2004 | 0 | 0 |
| 2003 | 0 | 0 |
| 2002 | 0 | 0 |
| 2001 | 0 | 0 |
A model year gets its own page when it has enough data for at least three sections
Most common problems
- Visibility1
- Fuel/propulsion system1
- Engine and engine cooling1
NHTSA ODI complaints, all model years
Recalls
16 campaigns cover the VT; the latest 12 are below.
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2010 VT trucks manufactured from April 9, 2008, through September 24, 2009, and certain 2016 model VNL and VNM trucks manufactured from January 2, 2015, through to November 6, 2015. The affected vehicles are equipped with USK non-greasable drag links that may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint.
Volvo Trucks North America (Volvo) is recalling certain model year 2007-2014 VAH, VHD, VNL, VNM, and VT models. The affected vehicles were built without a redundant clutch disengagement switch. Without a redundant switch, a loss of signal from the brake air pressure switch can prevent the clutch from automatically disengaging when the brake is applied.
VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE.
VOLVO IS RECALLING CERTAIN MODEL YEAR 2008-2011 VHD, VNL, VNM, AS WELL AS 2008-2010 VT VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF PART 567, "CERTIFICATION." THE TIRE DESCRIPTION MAY BE INCORRECT ON THE VEHICLE'S CERTIFICATION LABEL.
VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2009-2010 VNL, VT, AND 780 TRUCKS MANUFACTURED FROM MARCH 1, 2008 THROUGH FEBRUARY 6, 2009. THE BOTTOM TRACK THAT ATTACHES TO THE ARMS USED TO OPEN AND CLOSE THE WINDOW MAY DE-BOND, WHICH RESULTS IN THE GLASS COMING LOOSE AT THE BOTTOM.
VOLVO TRUCKS IS RECALLING 127,764 MY 2001-2008 VHD, VNL, VNM, AND MY 2005-2008 VT TRUCKS. A SEAL MAY FAIL ALLOWING WATER AND CONTAMINANTS TO SEEP INTO THE WINDSHIELD WIPER MOTOR.
ON CERTAIN TRUCKS, AN INCORRECT SOFTWARE PARAMETER WAS LOADED WHICH RESULTED IN THE DIESEL PARTICULATE FILTER (DPF) 'INHIBIT' FUNCTION BEING DISABLED. THE 'INHIBIT' FUNCTION IS A MEANS FOR THE DRIVER TO STOP A DPF REGENERATION FROM OCCURRING IF A VEHICLE IS IN A LOCATION THAT MAY PRESENT A HAZARDOUS SITUATION.
ON CERTAIN HEAVY DUTY TRUCKS, THE CIRCUIT PROTECTION (I.E. AUTOMATIC CIRCUIT BREAKERS) USED TO PROTECT THE VEHICLE LIGHTING SYSTEM MAY NOT PROVIDE ADEQUATE PROTECTION.
ON CERTAIN TRUCKS, THE BOLTS THAT ATTACH THE STEERING GEAR TO THE FRAME MAY NOT HAVE BEEN TIGHTENED TO THE SPECIFIED TORQUE.
ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN.
ON CERTAIN TRUCKS, THE HOOD RESTRAINT CYLINDER DOES NOT CONTAIN ENOUGH DAMPENING TO ADEQUATELY RESTRAIN THE HOOD.
ON CERTAIN TRUCKS, AN UNPROTECTED LEAD IN THE THERMOSWITCH OF THE HEATER MAY MAKE CONTACT WITH ANOTHER POST POSSIBLY CREATING A SHORT CIRCUIT, WHICH CAN RESULT IN CONTINUOUS OPERATION OF THE HEATING ELEMENT.
NHTSA recalls