11,145,731 US VINs16,875,657 Dutch plates3,603,918 businesses in 233 countries
English
AfrikaansAzərbaycancaBahasa IndonesiaBahasa MelayuCatalàČeštinaDanskDeutschEestiEnglishEspañolFilipinoFrançaisGaeilgeHrvatskiÍslenskaItalianoKiswahiliLatviešuLietuviųMagyarMaltiNederlandsNorskOʻzbekchaPolskiPortuguês (Brasil)Português (Portugal)RomânăShqipSlovenčinaSlovenščinaSrpskiSuomiSvenskaTiếng ViệtTürkçeΕλληνικάБеларускаяБългарскиКыргызчаҚазақшаМакедонскиМонголРусскийУкраїнськаქართულიՀայերենעבריתاردوالعربيةفارسیनेपालीहिन्दीবাংলাதமிழ்සිංහලไทยລາວမြန်မာខ្មែរ한국어日本語简体中文繁體中文
Check a VIN

Recall 2021387

Structure · Altec · published 22 Jun 2021

1Vehicles affected in Canada
1Models
2020–2020Model years
EquipmentSafety Mfr

The issue

Issue: On a certain aerial device, the wrong bolts may have used to mount the pedestal to the sub-base. As a result, the bolts may fail. If multiple bolts fail, the pedestal and sub-base could separate from the vehicle. Safety Risk: If the pedestal and sub-base separate from the vehicle, there may be a risk of injury. Corrective Actions: Altec will notify the owner by mail and advise them to perform a visual inspection of the bolts that attach the pedestal to the sub-base. If any grade 5 bolts are installed, an inspection should be completed on a daily basis until the fasteners have been replaced. Within 30 days of the initial inspection, the grade 5 fasteners should be replaced with grade 8 bolts.

Description (français)

Problème : Sur un dispositif aérien particulier, les mauvais boulons pourraient avoir été utilisés pour monter le socle à la sous-base. Par conséquent, si plusieurs boulons présentent une défaillance, le socle et la sous-base pourraient se séparer du véhicule. Risques pour la sécurité : Si le socle et la sous-base se séparent du véhicule, il pourrait y avoir des risques de blessures. Mesures correctives : Altec doit aviser le propriétaire par la poste et leur demander d'effectuer une inspection visuelle des boulons qui fixent le socle à la sous-base. Si un ou plusieurs boulons de catégorie 5 sont installés, une inspection doit être effectuée quotidiennement jusqu'à ce que les dispositifs de fixation aient été remplacés. Les dispositifs de fixation de catégorie 5 doivent être remplacés par des boulons de catégorie 8 dans les 30 jours suivant l'inspection initiale.

Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada · official text, unchanged

Vehicles covered

Make and modelModel years
Altec AT200A2020

Model years in this recall

NHTSA complaints and the number of recall campaigns for each model year this recall covers.

ModelYearComplaintsRecallsComplaints about structure
Altec AT200A202002—