Ford F Super Duty

VEHICLE DESCRIPTION: F-SUPER DUTY CREW CAB PICKUP TRUCKS (F-350 SHORT WHEELBASE TRUCKS EQUIPPED WITH A 6 3/4' PICKUP BOX AND DUAL REAR WHEELS) WERE BUILT AFTER A CHANGE WAS IMPLEMENTED TO DELETE A CLAMP, AND LATER A BRACKET THAT PROVIDED A GROUND FOR THE FUEL FILLER PIPE. THE PICKUP BOX MAY NOT HAVE BEEN PROPERLY GROUNDED.

VEHICLE DESCRIPTION: MOTOR HOME CHASSIS. THESE VEHICLES MAY HAVE A MIS-ROUTED WIRE HARNESS THAT ATTACHES TO THE BRAKE PEDAL POSITION SWITCH. THE WIRE COULD RUB ON THE STEERING COLUMN, RESULTING IN A SHORT CIRCUIT AND A BLOWN FUSE, CAUSING A LOSS OF STOP LAMP FUNCTION.

VEHICLE DESCRIPTION: F-SUPER DUTY STRIPPED MOTOR HOME CHASSIS BECAUSE THEY MAY HAVE A MISSING OR PARTIALLY INSTALLED BRAKE PEDAL TO MASTER CYLINDER PUSHROD RETAINING CLIP.

VEHICLE DESCRIPTION: SUPER DUTY TRUCKS AND CHASSIS-CABS EQUIPPED WITH 5.4L MANUAL TRANSMISSION POWERTRAINS. THE ACCELERATOR CABLE CORE WIRE CAN WEAR THE CABLE CONDUIT END FITTING DUE TO A FIFTEEN DEGREE ANGLE IT MAKES WITH THE CONDUIT AT THE THROTTLE BODY END. THIS COULD ALSO LEAD TO WEAR OR SEPARATION OF STRANDS OF THE CORE WIRE, WHICH COULD PREVENT THE THROTTLE FROM RETURNING TO THE IDLE POSITION.

VEHICLE DESCRIPTION: MOTOR HOME CHASSIS. THE ACCELERATOR CABLE IS SUSCEPTIBLE TO FREEZING. WATER CAN ACCUMULATE IN THE END FITTING AND CAN FREEZE AT TEMPERATURES OF 32 DEGREES FAHRENHEIT AND BELOW. THE ICE COULD PREVENT THE ACCELERATOR FROM RETURNING TO IDLE.

VEHICLE DESCRIPTION: MOTOR HOME CHASSIS. THE ACCELERATOR CABLE IS SUSCEPTIBLE TO FREEZING. WATER CAN ACCUMULATE IN THE END FITTING AND AT TEMPERATURES OF 32 DEGREES FAHRENHEIT AND BELOW, CAN FREEZE. THE ICE COULD PREVENT THE ACCELERATOR FROM RETURN TO IDLE.

VEHICLE DESCRIPTION: MOTOR HOME CHASSIS. HOT EXHAUST GASSES CAN LEAK FROM THE EXHAUST GAS RETURN (EGR) TUBE ON THE ENGINE. A HOLE CAN DEVELOP IN THE FLEXIBLE SECTION OF THE TUBE. HEAT DAMAGE TO THE PASSENGER COMPARTMENT FLOOR AND FLOOR COVERING CAN OCCUR.

VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS AND CHASSIS. THE TIRES ON THESE VEHICLES WERE DAMAGED DURING MOUNTING ONTO THE WHEELS. ONLY TRUCKS PRODUCED AT THE CUAUTITLAN, MEXICO PLANT BETWEEN SEPTEMBER 1, 1996, AND JULY 17, 1997, WERE AFFECTED BY THE DEFECT.

A PLASTIC COATED STEEL SUPPORT STRAP FOR THE BATTERY CABLE WAS DAMAGED WHEN IT WAS CRIMPED ONTO THE CABLE.

THE CROSSMEMBER FRAME GUSSETS WERE INSTALLED WITH UNDERSIZED THREADED FASTENERS FOLLOWING A BREAKDOWN OF THE PRODUCTION RIVET GUN THAT IS GENERALLY USED. THIS GUSSET IS THE ATTACHMENT POINT FOR THE REAR STRAP OF THE MID-SHIP FUEL TANK.

THE U-CLIP STYLE NUTS THAT RETAIN THE FRONT BUMPERS TO THE FRONT BUMPER INNER ARMS CAN FRACTURE.

A MALFUNCTIONING CHECK VALVE WITHIN THE FUEL PUMP ASSEMBLY CAUSES A PORTION OF THE UNUSED FUEL FROM ONE TANK TO BE RETURNED TO THE SECOND TANK. WHEN THIS OCCURS, THE CAPACITY OF THE SECOND TANK CAN BE EXCEEDED, CAUSING FUEL SPILLAGE.