Problems owners report
Complaints filed with NHTSA about the 2018 Kenworth T680, by the system named in each complaint. One complaint can name several.
- Service brakes4
- Forward collision avoidance3
- Power train2
- Seat belts2
- Tires1
- Unknown or other1
- Seats1
- Electrical system1
- Visibility/wiper1
- Engine1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Fatal crashes in the US
From 2020 to 2023, 66 2018 T680 vehicles were involved in crashes on US public roads in which someone died; 11 people died inside them, and 5 of the vehicles rolled over. This is a count, not a crash rate: it grows with the number of cars on the road.
NHTSA Fatality Analysis Reporting System (FARS), crash years 2020–2023 (public domain)
New York safety inspections
At its first New York inspection the 2018 Kenworth T680 failed the safety check 1.11% of the time — 33% less often than the average 2018 passenger car (1.65%). Median odometer at inspection: 354,911 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Recalls in Canada
10 Transport Canada recalls for the 2018 Kenworth T680.
| 2022210 25 Apr 2022 | Steering Issue: On certain trucks, the fasteners that attach the steer arm to the steering knuckle may fail. If this happens, the steer arm could separate from the ste… |
| 2020461 29 Sept 2020 | Brakes Issue: Certain trucks were built with a standard rear brake ABS modulator valve instead of a quick release valve. This could result in an increased stopping d… |
| 2020148 7 Apr 2020 | Lights And Instruments Issue: On certain trucks, the warning light for the tractor anti-lock brake system (ABS) may not turn on if the system loses power. If this happens, the drive… |
| 2018702 13 Dec 2018 | Seats And Restraints On certain vehicles, the webbing on certain seat belt buckle assemblies may not have been securely fastened during assembly. As a result, in the event of a cras… |
| 2018632 19 Nov 2018 | Lights And Instruments On certain trucks, the intermediate side marker lamp/turn signals do not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Ligh… |
| 2018527 25 Sept 2018 | Fuel System On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling syst… |
| 2018077 8 Feb 2018 | Lights And Instruments Certain vehicles equipped with Eaton Ultrashift Plus or Eaton Advantage automatic transmissions with right hand stalk shifters may not comply with the requireme… |
| 2017664 28 Dec 2017 | Powertrain Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 102 – Transmission Control Functions. The transmission con… |
| 2017361 20 Jul 2017 | Fuel System On certain vehicles equipped with Cummins ISX 15 engines and certain fuel pumps, the drive gear on the fuel pump may spin loose on the drive shaft. This could … |
| 2017093 20 Feb 2017 | Fuel System On certain vehicles equipped with 2017 emissions engines, a tee fitting in the fuel supply was improperly manufactured and could leak fuel. Leaking fuel, in the… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.
PACCAR Incorporated (PACCAR) is recalling certain 2016-2021 Kenworth T680 trucks equipped with a 2.1m Cab and WABCO 6S/6M ABS brake system with drum brakes. The brake systems were manufactured with a standard rear-brake ABS modulator valve instead of a quick release valve, which may exceed the intended service-brake release timing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 T680 and T880 tandem axle vehicles equipped with a parking brake on a single axle and certain models of automated manual transmissions. During cold temperatures, the signal from the park brake pressure switch to the transmission controller may be delayed possibly resulting in the vehicle moving unexpectedly.
PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
PACCAR Incorporated (PACCAR) is recalling certain 2018 Kenworth T680 and T880, and Peterbilt 567 and 579 trucks. The seat belt buckle assemblies on these vehicles may have been glued and not sewn during manufacturing, possibly causing the assembly to come apart under load, such as in the event of a crash.
PACCAR Incorporated (PACCAR) is recalling certain 2013-2019 Kenworth T680 and T880 and Peterbilt 579 trucks, greater than 30 feet long and equipped with side extender mounted intermediate marker lamp/turn signals that do not include a reflex reflector. Since both intermediate side marker lamps and reflex reflectors are required, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 567 and 579 trucks and 2015-2018 Kenworth T660, T680, T800, T880 and W900 trucks. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Kenworth T680 and T880 trucks, and Peterbilt 567 and 579 trucks, all equipped with an automated Eaton UltraShift Plus or Eaton Advantage Transmission with right hand stalk shifter. The display that indicates which transmission gear the driver selected may display incorrectly. The display can indicate 'N' when the shifter is set into 'D' or 'R', and the as a result, the truck will not move. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 102, "Transmission Shift Lever Sequence/Starter Interlock/Transmission Braking Effect," and number 101, "Control and Displays."
PACCAR Incorporated (PACCAR) is recalling certain 2018 Peterbilt 567, 579, Kenworth T680, and T880 trucks, equipped with certain Eaton Endurant and PACCAR AMT transmissions. The transmission control module (TCM) may allow the engine to crank briefly even if the transmission shifter is not in neutral. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 102, "Transmission Shift Lever Sequence/Starter Interlock/Transmission Braking Effect."
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 367, 389, 567, 579 and 587 trucks, and 2018 Kenworth C500, T680, T800, T880 and W900 trucks equipped with Cummins ISX 15L engines. These engines have a fuel pump whose drive gear could possibly slip on its drive shaft, causing a fuel pump function loss, resulting in an engine stall.
PACCAR Incorporated (PACCAR) is recalling certain 2015-2018 Kenworth K370, T680, T880 and 2017-2018 Peterbilt 567 and 579 trucks. The plastic fuel tee fittings on these trucks may leak fuel.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Kenworth told its dealers about the 2018 Kenworth T680: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10254164 | Certain C500/T440/T470/T660/T680/T800/T880/W900 chassis may have air tank reservoirs that do not meet air volume requirements per FMVSS/CMVSS 121 Air Brake Systems. This bulletin will be updated when repair parts and procedures are available. |
| 10238385 | Emissions Recall Certain Vehicle Model Year 2017-2019 chassis equipped with EPA2017 compliant PACCAR MX-13 engines have an EGR flex pipe that can develop cracks and leak untreated exhaust. The EGR Flex pipe will be replaced if it has a suspect part number. |
| 10238382 | Certain chassis with Engine Model Year 2016-2021 PACCAR MX-11/MX-13, or EPA13 and EPA21 Cummins ISX12/ISX15/X15 engines that had a previously failed DEF sensor and with DEF sensor software disabled due to industry DEF sensor shortages will now be able to receive a replacement DEF sensor, DEF tank heater coolant control valve, and re-enabled DEF diagnostic software. Please note that chassis equipped with PACCAR PX engines will be eligible for this repair at a future date when software is available. |
| 10238376 | E279: PACCAR MX-13/MX-11 Engine MY17 Software Incorrectly Sets DTC P1092 PACCAR MX-13/MX-11 Engine MY17 Software Incorrectly Sets DTC P1092 Emission Recall - PACCAR MX-13/MX-11 MY2017 software incorrectly sets DTC P1092, which could result in reduced available engine torque and/or engine protection mode. An engine software update is available that corrects the issue. |
| 10232497 | Certain Model Year 2018 PACCAR MX-11 engines may have contaminated Crankcase Pressure Sensors. These sensors will be replaced. |
| 10232496 | Certain Model Year 2021-2024 chassis with PACCAR MX engines and optional fuel filter restriction virtual gauge may display incorrect restriction levels. The virtual gauge will be temporarily disabled until a revised sensor strategy is developed. |
| 10231101 | This campaign is the final opportunity to replace the oil filter screw cap to reduce occurrences of broken bypass valve tabs. Broken oil valve tabs can cause oil flow obstruction to critical engine parts, resulting in serious engine damage. Customers that do not receive this repair may be responsible for progressive engine damage caused by broken oil bypass valve tabs. |
| 10225578 | Info Only - PACCAR is introducing Over-the-Air (OTA) software updates for engine MY17 and newer chassis equipped with Cummins X15, X12, ISX12, ISX12N, L9N, PX-7, and PX-9 engines The technology will leverage the existing Remote Diagnostic cs hardware to deliver secure software updates remotely. This will reduce downtime and save on maintenance costs for eligible vehicles. |
| 10218895 | Kenworth is providing guidance for PACCAR MX Engine Composite Oil Pan leak troubleshooting to avoid over-repairs and to provide warrantable repair guidance. Oil leaks, if not repaired, can lead to severe engine damage. |
| 10213089 | Safety Recall Interim Notification - The Dana D-Series front axle steer arm fasteners that attach the steer arm to the steering knuckle may fail, increasing the risk of a crash or injury. Repair information will be added when a repair procedure and parts are available. |
| 10208770 | Due to major data carriers phasing out 3G networks, chassis currently utilizing first generation Peoplenet Mobile Gateway (PMG001) will experience severe 3G service degradation as early as January of 2022. Chassis currently utilizing 3G antennas as a primary antenna may experience this degradation |
| 10206097 | Non-Safety Campaign: Drivers of vehicles equipped with PACCAR TX-12 transmissions may experience harsh shifts and gear grinding noise. Premature Main Drive Gear damage may occur due to clutch housing and main case countershaft bearing bore wear. |
| 10206084 | Non-Safety Campaign: Eaton Endurant transmissions may experience premature Main Drive Gear damage due to clutch housing and main case countershaft bearing bore wear. A Clutch Housing Front Cover Kit will be installed to address the issue. |
| 10203780 | Non-Safety Campaign - The TPMS ECU is not communicating properly with TPMS sensors. The result is a delay or failure of communication between the TPMS ECU and the TPMS sensors , causing inaccurate TPMS readings. A firmware update resolves the issue. |
| 10203772 | Non-Safety Campaign Vehicles with a Cummins X15 engine and Horton fan drive may set Diagnostic Trouble Code (DTC) 6637 and/or 3838 due to fan speed that results in the fan remaining activated until the power is cycled. A new controller will resolve the issue. |
| 10201965 | Fix-As-Fail Due to undersupply issues, only a limited supply of Diesel Exhaust Fluid (DEF) sensors are available. As a temporary solution, after PACCAR confirms a DEF sensor is not available, a temporary software update will allow a vehicle to continue operation with a failed DEF sensor by disabling the DEF sensor diagnostics. |
| 10198762 | Information Only C hassis equipped with MY2021 B EPA emission s standards will be shipped through atleast the end of the 2021 calendar year without particulate matter (PM) sensors installed . |
| 10198760 | An engine software update is required to resolve OBD system readiness, DEF doser diagnostics, and otherOBD system software related issues. |
| 10194769 | Selected engines have been identified to receive a camshaft inspection and an update for improved camshaft lubrication. |
| 10188550 | Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter. |
| 10188468 | Non-Safety Campaign Chassis with the City Horn option may generate unexpected alerts. A VECU software update is available to resolve the issue. |
| 10188467 | Non-Safety Campaign The batteries may drain quickly due to the VECU not going to sleep. Updated VECU software is available to resolve the issue. |
| 10186164 | T680 predictive cruise control(PCC) incompatibility with cummins engine. |
| 10185190 | Fix-As-Fail - Prior versions of Eaton Endurant transmission software may be prone to setting Linear Clutch Actuator (LCA) fault codes leading to possible LCA hardware replacement. |
| 10185189 | Non-safety campaign: Vehicles equipped with an Eaton Endurant 12 speed transmission may experience transmission service lamp activation, no gear engagement from neutral, and/or DTC 511 FMI 7 or 10 is set. Resolution is to update the transmission software and calibrations. |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Haldex Brake Chamber Failures
NHTSA Office of Defects Investigation