Mack Pinnacle (chu)

Mack Trucks, Inc. (Mack) is recalling certain 2021-2022 Anthem, Granite, and Pinnacle vehicles. The hubcap compression spring can cause the hubcap to separate.

Mack Trucks, Inc. (Mack) is recalling certain 2018-2022 Anthem (AN), Granite (GR/GU), and Pinnacle (CHU/CXU/PI) vehicles equipped with "camelback" rear suspension and electronic stability control. The vehicles may not stay in their lane at certain speeds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 136, "Electronic Stability Control Systems on Heavy Vehicles."

Mack Trucks, Inc. (Mack) is recalling certain 2020 Anthem (AN), Granite (GR), and Pinnacle (PI) vehicles. The castle nuts and cotter pins used to connect the steering drag link to the pitman arm and steering arm may have not been correctly installed, potentially causing separation of the drag link.

Mack Trucks, Inc. (Mack) is recalling certain 2020 Anthem and Pinnacle trucks. The conspicuity reflectors at the back of the cab may be blocked by the exhaust system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Assoc. Equipment."

Mack Trucks Inc. (Mack) is recalling one 2014 Pinnacle (CXU) vehicle and certain 2018-2019 Mack Anthem (AN) vehicles equipped with air brake supply tanks that have an air volume amount ranging from 70% to 96% of the amount required by the regulation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Mack Trucks, Inc. (Mack) is recalling certain 2019-2020 Mack Anthem, Granite, Pinnacle vehicles. The passenger side door down view mirror may detach from the door.

Mack Trucks, Inc. (Mack) is recalling certain 2016 Pinnacle CHU and CXU diesel trucks equipped with certain Dana steer axles. The castellated nut and cotter pin on the steer axles may not have been properly torqued, allowing the tie rod to loosen within the steer axle.

Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.

Mack Trucks, Inc. (Mack) is recalling certain model year 2017 Pinnacle CHU and CXU trucks manufactured March 9, 2016, to May 19, 2016 and equipped with Goodyear G399A LHS 295/75R22.5 LRG tires. The tires on the affected vehicles may have cured improperly causing an incomplete adhesion, possibly resulting in a partial tread separation.

Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.

Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2014 Pinnacle (CHU and CXU) trucks manufactured September 10, 2010, to June 17, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.

Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.