Recalls in Canada
3 Transport Canada recalls for the 2010 MCI D4000.
| 2014236 19 Jun 2014 | Electrical Certain coaches previously repaired as part of recall 2012173 may require additional modifications. The power draw from the LED interior lights may exceed the d… |
| 2012173 30 May 2012 | Electrical On certain coaches, the power draw from the LED interior lights may exceed the design limits of the electrical circuit. This could allow certain components to … |
| 2010153 11 May 2010 | Wheels On certain coaches, the front and/or tag axle assemblies may have been installed with improper torque applied to the hub/rotor/wheel adapter bolts. Reduced bol… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Motor Coach Industries, Inc (MCI) is recalling certain model year 2009-2011 D4000 and D4500 and 2010 D4505 motor coaches equipped with LED lights interior lights powered by either a Vansco or IO multiplex system. Due to the excessive power draw of the LED lights, heat may build up at the fuse block and connector, causing the components to melt.
Motor Coach Industries (MCI) is recalling certain model year 2000-2012 D, E, G and J series coaches manufactured January 2000 through June 2011 and equipped with Sure Power battery equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
MOTOR COACH INDUSTRIES, INC (MCI) IS RECALLING CERTAIN MODEL YEAR 2009-2011 D4000, D4500 AND 2010 D4505 MOTOR COACHES EQUIPPED WITH LED LIGHTS INTERIOR LIGHTS AND POWERED BY EITHER A VANSCO OR IO MULTIPLEX SYSTEM. DUE TO EXCESSIVE POWER DRAW OF THE LED LIGHTS, HEAT MAY BUILD UP AT THE FUSE BLOCK AND CONNECTOR, CAUSING COMPONENTS TO MELT.
MOTOR COACH INDUSTRIES (MCI) IS RECALLING CERTAIN MODEL YEAR 2003, AND 2007-2012 E AND J MODELS ALONG WITH MODEL YEAR 2007-2012 D4000, D4005, D4500, D4505, D4000ISTV MOTOR COACHES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) MODULES, MANUFACTURED FROM OCTOBER 2002, THROUGH OCTOBER 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.
MCI IS RECALLING CERTAIN MODEL YEAR 2010-2011 D4500, D4505, AND D4000 MOTOR COACHES. THE AFFECTED PULLEY COVERS MAY LACK CERTAIN WELDS REQUIRED TO KEEP THE COVERS ATTACHED TO THE COACH STRUCTURE.
MCI IS RECALLING CERTAIN MODEL YEAR 2010 D4000, D4005, D4500, D4505, E4500, AND J4500 MODEL MOTOR COACHES MANUFACTURED FROM SEPTEMBER 2009 THROUGH MAY 2010, EQUIPPED WITH ARVINMERITOR FRONT AND TAG AXLE ASSEMBLIES. THE SUSPECT AXLES MAY HAVE HAD IMPROPER TORQUE APPLIED TO THE HUB/ROTOR/WHEEL ADAPTER BOLTS DURING THE ASSEMBLY PROCESS. REDUCED BOLT TORQUE COULD LEAD TO VIBRATION LOOSENING OF THE BOLT.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What MCI told its dealers about the 2010 MCI D4000: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10213033 | Technical Service Information Bulletin describing the replacement of seating backrest attachment hardware with the addition of a mechanical lock nut on specifically equipped buses manufactured prior to model year 2020. |
| 10206198 | This Technical Service Information Bulletin (TSIB) describes an update from Meritor for the bolt torque application requirements on hub-to-rotor bolts for the front, drive and tag axles, on specific coaches equipped with Meritor EX225 disc brakes, on either Conventional, PreSet or Unitized Wheel-End hubs. |
| 10203367 | Motor Coach Industries (MCI) has received field reports of the alternator bracket on 2010 and 2013 Cummins ISX engine exhibi;ting signs of fatigue and cracking. MCI is instructing customers operating a D or J4500 serues ciacg eqkyuooed wutg a 2010 or 2013 Cummins ISX engine to perform the visual inspection outlined in this Service Information bulletin. |
| 10180805 | This Service Bulletin provides a checklist of actions to perform on a daily, weekly and monthly basis for parked coaches before they are considered ready for driving. |
| 10167366 | This Service Bulletin informs owners of the procedure to clean the batteries and reapply corrosion inhibitor every 6000 miles or 3 months, whichever first occurs. |
| 10056066 | MOTOR COACH INDUSTRIES (MCI): RED 185 DUROMETER POLYURETHANE BUSHINGS WERE REPLACED WITH 288 POLYURETHANE BUSHINGS IN SHOCK ABSORBERS THAT IN COLD TEMPERATURES, WILL FAIL, CAUSING ABSORBER STUD TO BREAK, AT BUSHING, AND COACH IS NOT OPERATIONAL DUE TO RISK OF DAMAGE TO SUSPENSION COMPONENT. MODEL D SERIES. *PE |
| 10038824 | MOTOR COACH INDUDSTRIES: INFORMATION ON REPLACING THE COOLANT PUMP THAT MAY HAVE A PROBLEM. *RM |
| 10038195 | MOTOR COACH INDUSTRIES SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THERE MAY BE A HARSH DOWNSHIFT, RPM FLARE, OR THE TRANSMISSION MAY LOCK. *RM |
NHTSA manufacturer communications (public domain)
NHTSA investigations
MCI Drive Shaft Safety Loop Failures
MCI Driveshaft Safety Loop Failures
NHTSA Office of Defects Investigation