Recalls in Canada
6 Transport Canada recalls for the 2012 MCI D4500.
| 2026007 15 Jan 2026 | Visual System Issue: On certain buses, the wrong glass may have been installed on the lower front entry door panel. As a result, the glass may not meet certain requirements… |
| 2018256 14 May 2018 | Engine On certain motor coaches, the exhaust bellows pipe may fail prematurely and cause a leak. An exhaust leak during a regeneration event could allow the leakage of… |
| 2017280 25 May 2017 | Engine On certain vehicles, the bellows pipe (a component of the exhaust system) may have been installed incorrectly and could fail. As a result, combustion from a Di… |
| 2013121 15 Apr 2013 | Engine On certain vehicles, the bellows pipe (a component of the exhaust system) may have been installed incorrectly and could fail. As a result, combustion from a Di… |
| 2012125 10 Apr 2012 | Other On certain coaches equipped with a sedan style entrance door, thirty minutes after the park brake is set and the ignition is turned OFF, the entrance door will … |
| 2011377 21 Oct 2011 | Other On certain vehicles, specific operating conditions (such as tight, successive, highly banked curves in opposite directions), could trigger unintended Electronic… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Motor Coach Industries (MCI) is recalling certain 102DL3, 102D3, MC12PTV, E4500, D4000, 102D3ISTV, D4500, J4500, D4000ISTV, D4005, D4505, and J3500 transit buses. Please refer to MCI's recall report for specific model year information. The front door lower curb view glazing material is incorrect. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."
Motor Coach Industries (MCI) is recalling certain 2011-2016 D4500, D4505, D4000, D4005, and D4000 ISTV motor coaches equipped with ISX engines. Due to vibrations, the exhaust bellow pipes develop a hole.
Motor Coach Industries (MCI) is recalling certain 2011-2012 MCI D4000, D4005, D4500 and D4505 coaches equipped with Cummins ISX 12 liter engines. The vehicles may have an incorrectly installed exhaust bellow pipe, resulting in a bend in the pipe which can cause its premature failure.
Motor Coach Industries (MCI) is recalling certain model year 2011-2013 and 2015 J4500 coaches manufactured November 18, 2011, to July 10, 2015, 2011-2012 and 2014-2015 D4000 coaches manufactured manufactured September 24, 2010, to September 5, 2015, 2011-2013 and 2015-2016 D4005 coaches manufactured January 17, 2011, to November 23, 2015, 2012-2014 and 2016 D4000ISTV coaches manufactured July 18, 2012, to December 2, 2015, 2010-2016 D4500 coaches manufactured April 15, 2010, to December 18, 2015 and 2011-2016 D4505 coaches manufactured December 15, 2010, to December 4, 2015. The affected buses are equipped with certain Recaro Ergo-M Commercial Bus Driver Seats that have J-Brackets that may be missing welds which could allow the seat belt anchorage assembly to separate from the J-Bracket.
Motor Coach Industries (MCI) is recalling certain model year 2012-2013 D4000, D4000ISTV, D4005, D4500, and D4505 motorcoaches manufactured from May 2012 through December 2012 and equipped with a Cummins ISX EPA 2010 engine. In the affected buses, the bellows pipe in the exhaust system may have been incorrectly assembled, which could result in a failure of the pipe during operation.
MOTOR COACH INDUSTRIES, INC (MCI) IS RECALLING CERTAIN MODEL YEAR 2012 D4505, D4500, AND D4000ISTV MOTOR COACHES, EQUIPPED WITH A SEDAN STYLE ENTRANCE DOOR AND AN ACTIA MULTIPLEX SYSTEM. THIRTY MINUTES AFTER THE PARK BRAKE IS SET AND THE IGNITION IS TURNED OFF, THE ENTRANCE DOOR WILL CLOSE WITHOUT WARNING.
MOTOR COACH INDUSTRIES (MCI) IS RECALLING CERTAIN MODEL YEAR 2003, AND 2007-2012 E AND J MODELS ALONG WITH MODEL YEAR 2007-2012 D4000, D4005, D4500, D4505, D4000ISTV MOTOR COACHES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) MODULES, MANUFACTURED FROM OCTOBER 2002, THROUGH OCTOBER 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What MCI told its dealers about the 2012 MCI D4500: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011092 | Information to owners showing the proper procedure for checking the oil level in a BITZER HVAC compressor. |
| 10213033 | Technical Service Information Bulletin describing the replacement of seating backrest attachment hardware with the addition of a mechanical lock nut on specifically equipped buses manufactured prior to model year 2020. |
| 10206198 | This Technical Service Information Bulletin (TSIB) describes an update from Meritor for the bolt torque application requirements on hub-to-rotor bolts for the front, drive and tag axles, on specific coaches equipped with Meritor EX225 disc brakes, on either Conventional, PreSet or Unitized Wheel-End hubs. |
| 10180805 | This Service Bulletin provides a checklist of actions to perform on a daily, weekly and monthly basis for parked coaches before they are considered ready for driving. |
| 10167381 | This Procedure outlines the steps to install a relief valve on the air compressor for coaches equipped with DD13 engines. |
| 10167366 | This Service Bulletin informs owners of the procedure to clean the batteries and reapply corrosion inhibitor every 6000 miles or 3 months, whichever first occurs. |
| 10119746 | This Service Bulletin supersedes Service Bulletin 424 in its entirety and informs customers that MCI was notified by Cummins Inc. that it has issued a campaign to addresses the ISX lubricating oil filter bypass valve in addition to the previous fuel pump repair with a new bypass valve that has more effective sealing capability and provides better protection to fuel pump lubricated components on model year 2008-2013 MCI D model coaches and model year 2011-2014 MCI J4500 model coaches. This program is being performed only by Cummins Service Network and its authorized dealers, therefore, all par |
| 10119743 | This Service Bulletin informs customers that MCI was notified by Cummins Inc. that it has released Campaign C1638 that addresses the ISX lubricating oil filter bypass valve in addition to the previous fuel pump repair actions outlined in MCI SB 419 and Cummins FCP C1556 on model year 2008-2013 MCI D model coaches and model year 2011-2014 MCI J4500 model coaches. This program is being performed only by Cummins Service Network and its authorized dealers, therefore, all parts and labor required for this program will be provided by Cummins. |
| 10119169 | This Service Bulletin informs affected customers that MCI was notified by Cummins Inc. that it has issued a campaign to address ISX high pressure fuel pump ceramic plunger fractures as well as the potential of damage to the roller/tappet assembly on model year 2011-2013 MCI D model coaches and model year 2011-2014 MCI J4500 model coaches. This program is being performed only by Cummins Service Network and its authorized dealers, therefore, all parts and labor required for this program will be provided by Cummins. |
| 10119162 | This Service Bulletin informs affected customers that the diesel exhaust fluid (DEF) pressure line may exhibit signs of fatigue and melting on model year 2011-2013 MCI D model coaches, and that MCI will remedy the affected coaches at no cost to the customers. |
| 10119152 | This Service Bulletin supersedes Service Bulletin 392 in its entirety and informs affected customers that coaches equipped with a Cummins 2010 engine can experience intermittent faults of the engine and/or transmission of the mulitplex controller program and as a result, the coach will operate with active engine and/or transmission codes that may require immediate attention on model year 2011-2013 MCI D model coaches, and that MCI will remedy the affected coaches at no cost to the customers. |
| 10119151 | This Service Bulletin informs affected customers that due to the Actia's module internal circuit characteristic the potential may exist in which both the high side and low side output of power management module (PMM)1 may be active at the same time for a very brief time. This may result in an electrical short on the low side output and intermittent loss of the ignition signal on model year 2010-2012 MCI D model coaches, and that MCI will remedy the affected coaches at no cost to the customers. |
| 10119150 | This Service Bulletin informs customers that MCI was notified by Cummins Inc. that it has released Campaign C1344 that addresses a calibration change, which Cummins advises will improve the engine and aftertreatment reliability on Cummins ISX engines in model year 2011-2013 MCI D model coaches, model year 2011-2013 MCI E4500 model coaches and model year 2011-2013 MCI J4500 model coaches. This program is being performed only by Cummins Service Network and its authorized dealers, therefore, all parts and labor required for this program will be provided by Cummins. |
| 10119143 | This Service Bulletin informs affected customers that MCI was notified by Cummins Inc. that it has issued campaign C1241 that addresses a calibration issue, which results in the engine brakes being energized with 24 volts rather than the required 12 volts on Cummins ISX engines in model year 2011-2012 MCI D model coaches, model year 2011-2012 MCI E4500 model coaches, and model year 2011-2012 MCI J4500 model coaches. This program is being performed only by Cummins Service Network and its authorized dealers, therefore, all parts and labor required for this program will be provided by Cummins. |
| 10119142 | This Service Bulletin informs affected customers that coaches equipped with a Cummins 2010 engine may experience intermittent faults on the engine and/or transmission without having the designated warning tell-tale (check engine light and/or check transmission light) illuminate on the instrument panel on model year 2011-2013 D model coaches, and that MCI will remedy the affected coaches at no cost to the customers. |
| 10119139 | This Service Bulletin informs affected customers that the retention nut utilized on the Leece Neville alternator pulley installation is not maintaining the proper torque which may result in alternator bearing failure on model year 2011-2012 MCI D model coaches, 2011-2012 MCI E4500 model coaches, and 2011-2012 MCI J4500 model coaches, and that MCI will remedy the affected coaches at no cost to the customers. |
| 10056071 | MOTOR COACH IND. (MCI): TO CORRECT AN ACTIVE FAULT CODE (2311), EXPERIENCED IN THE ENGINE, A NEW CALIBRATION ECM IS BEING INSTALLED. *PE |
| 10056066 | MOTOR COACH INDUSTRIES (MCI): RED 185 DUROMETER POLYURETHANE BUSHINGS WERE REPLACED WITH 288 POLYURETHANE BUSHINGS IN SHOCK ABSORBERS THAT IN COLD TEMPERATURES, WILL FAIL, CAUSING ABSORBER STUD TO BREAK, AT BUSHING, AND COACH IS NOT OPERATIONAL DUE TO RISK OF DAMAGE TO SUSPENSION COMPONENT. MODEL D SERIES. *PE |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Exhaust Bellows Pipe Fracture Recall
MCI Drive Shaft Safety Loop Failures
MCI Driveshaft Safety Loop Failures
NHTSA Office of Defects Investigation