Problems owners report
Complaints filed with NHTSA about the 2017 Mercedes-Benz Sprinter 3500, by the system named in each complaint. One complaint can name several.
- Wheels7
- Electronic stability control (esc)7
- Service brakes5
- Vehicle speed control4
- Electrical system3
- Structure3
- Air bags2
- Fuel system, diesel2
- Unknown or other2
- Power train1
NHTSA ODI complaints (public domain) · updated 23 Oct 2026 · 0 injuries and 0 deaths reported
Compared with other years
NHTSA ODI complaints by model year
Recalls in Canada
3 Transport Canada recalls for the 2017 Mercedes-Benz Sprinter 3500.
| 2018237 7 May 2018 | Structure On certain vehicles, spot welds on the front driver and/or passenger side wall paneling might be missing. In the event of a crash, the vehicle's structural inte… |
| 2018092 16 Feb 2018 | Label On certain vehicles with folding seats and a total permissible weight of under 4536 kg (10,000 lbs), the information label for body builders contains incorrect … |
| 2017629 14 Dec 2017 | Other On certain vehicles equipped with Crosswind Assist, the Crosswind Assist function is not correctly programmed, and therefore is inoperable. In the event of stro… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Daimler Vans USA, LLC (DVUSA) is recalling certain 2012-2018 Mercedes Benz Sprinter 3500 and Freightliner Sprinter 3500 vehicles upfitted into campers or recreational vehicles. The Electronic Stability Control (ESC) unit may become disabled on these vehicles.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2015-2020 Mercedes Benz Sprinter and Freightliner Sprinter vehicles. The hydraulic power steering return line hoses may detach at their connection points under certain operating conditions, causing hydraulic fluid to leak.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2015-2017 Freightliner Sprinter 2500 and 3500 and Mercedes-Benz Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the driver frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2014-2017 Freightliner Sprinter 2500 and 3500 and Mercedes-Benz Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2017 Mercedes-Benz and Freightliner Sprinter 2500 and 3500 vehicles. These vehicles may be missing spot welds on the front side wall, connecting the door portal to the hinge reinforcements in the A-pillar area, possibly affecting vehicle strength in a crash.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2016-2017 Mercedes-Benz Sprinter 2500 and Sprinter 3500 vehicles, equipped with folding seats (sales code S20). The unloaded vehicle weight (UVW) label on these incomplete vehicles may be incorrect.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2017 Mercedes-Benz Sprinter 3500 and Freightliner Sprinter 3500 vehicles equipped with the Crosswind Assist function. In the event of strong crosswind, automatic brake interventions by the vehicle dynamics control system (ADAPTIVE ESP) might not be activated.
Midwest Automotive Designs, LLC (Midwest) is recalling certain Custom Vans and Camper Van recreational vehicles built on 2014-2017 Mercedes Benz Sprinter chassis and 2016-2017 RAM Promaster chassis. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Daimler Vans USA, LLC (DVUSA) is recalling certain 2017 Mercedes-Benz and Freightliner Sprinter 2500 and 3500 vans. The spare tire holder under the vehicle may not be properly secured.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Mercedes-Benz told its dealers about the 2017 Mercedes-Benz Sprinter 3500: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011223 | SMOG/Emissions Test fail due to one or more Readiness Monitors not set Complaint: The vehicle has failed the State Emissions Certification because one or more of the OBDII readiness monitors are not completely set. Cause: One or more of the following Readiness Monitors are not fully set within XENTRY: Misfire Monitoring - Injection System Fuel System Monitoring - Injection System, Fuel System, EGR Valve, O2 Sensor NMHC Catalyst Monitoring - NMHC/Diesel Oxidation Catalyst NOx Aftertreatment Monitoring - SCR Catalyst System Boost Pressure System Monitoring - Turbocharger, Charge Air System Exh |
| 11001114 | Complaint A: The engine is jolting/bucking between 1700 and 1900 rpm. Complaint B: One or more mechanical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of mechanical fault codes in table below. NOTE: If one or more electrical related fault codes for EGR Valve are also present in CDI, utilize Complaint C. Review list of electrical fault codes PDF document in attachments. Complaint C: One or more electrical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of electrical fault c |
| 10235973 | Recall Campaign bulletin |
| 10232322 | Complaint Engine runs irregularly and it shakes. Indicator lamp lights up. Information: Fault codes for injectors and/or combustion misfires may be stored in the CDI control unit: On engine 642 cylinder 6 is affected. On engine 651 cylinder 2 is affected. Cause Charge air from the exhaust gas recirculation is condensed after being introduced into the charge air section. Information: Under certain operating conditions, condensation that has collected in the charge air cooler can enter the combustion chamber to a damaging degree and a damage profile is then generated (connecting rod be |
| 10231020 | Complaint Various issues including control unit programming procedure will not complete successfully/no newer software found, communication faults, or sporadic malfunction of systems. Cause Aftermarket CAN device could be installed into the vehicle's CAN network. Such devices can be but are not limited to, remote start modules, CAN blockers, or high idle modules. Remedy A successful control unit programming session cannot be ensured while aftermarket devices are connected to the vehicle's CAN network. Some of the device companies supply a bypass to allow control unit programming. |
| 10207197 | Complaint Thank you for your continued support of the US Emission Modification Program (EMP). We are providing this LI to assist you in addressing vehicles that come to your workshop to receive the Approved Emission Modification (AEM), but show in VMI as eligible only for the Canada BlueTEC II Field Measure or as currently registered in Canada. Only vehicles currently registered in the United States, or held by a US dealer, are eligible to receive the US Approved Emission Modification (AEM), including vehicles originally built for the Canadian market. This LI is intended to help you evaluate |
| 10207182 | Complaint Oil loss from engine or visible traces of oil in the engine compartment. Cause To be determined in each possible situation Remedy Procedure for cause analysis: 1. Clean the engine if necessary. 2. Apply leak tracing powder. 3. Perform a test drive. 4. Locate the oil leak. 5. Perform the repair in accordance with the specific WIS document appropriate for the cause of the oil leak. |
| 10206073 | Various complaints due to aftermarket OBDII device installed |
| 10206072 | "The monitor status this driving cycle (PID 41) can be displayed as disabled in the generic scan tool although no monitor of this group is disabled " |
| 10205221 | Headlamps and lamps fogged and/or leaking. |
| 10205151 | Coolant, vacuum, temperature fault codes. |
| 10202549 | Replace Wheel Speed Sensors |
| 10202548 | Replace Wheel Speed Sensors |
| 10191557 | Mercedes-Benz AG has determined that on certain Mercedes-Benz Sprinter vehicles, the hydraulic power steering return line hoses may detach at their connection points under certain operating conditions and may cause hydraulic fluid to leak resulting in the loss of power steering. |
| 10187796 | Replace 3rd brake lamp, remove soft top compartment cover to access. |
| 10187793 | Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz, has determined that on certain Model Year (?MY?) 2013-2017 B-Class, C-Class, CLA-Class, CLS-Class, E-Class, G-Class, GL-Class, GLA-Class, GLC-Class, GLE-Class, GLK-Class, GLS-Class, GT-Class, M-Class, S-Class, SL-Class, and SLK-Class (117, 156, 166, 172, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 253, 292, and 463 platform), the software for the PASS control unit does not meet current series production configuration and therefore the possibility exists that a correct GPS position cannot be determined in the control unit for l |
| 10186324 | Inspect Power Steering Hose Clamps |
| 10179954 | Power Steering Hose Updated Repair Method |
| 10179906 | Engine power output is reduced and/or engine indicator lamp lights up, various fault codes present in area of ex- haust gas recirculation (EGR system) or in charge air system |
| 10178714 | Headlamps fogged |
| 10170541 | Seat belt does not roll up correctly |
| 10170528 | MBUX multimedia system: Commissioning problem - No PIN code available in VeDoc |
| 10170524 | SOS display illuminates - poor radio and GPS reception or no reception at all (vehicle with code E4A) |
| 10170523 | MBUX multimedia system: Central display goes dark temporarily (Connect5) |
| 10170522 | MBUX multimedia system: Central display intermittently remains dark (NTG6) |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Desiccated Air Bag Inflator Rupture
Rear Wheel Speed Sensor Failure
NHTSA Office of Defects Investigation