Compared with other years
NHTSA ODI complaints by model year
Recalls in Canada
5 Transport Canada recalls for the 2008 Peterbilt 320.
| 2015211 15 May 2015 | Engine On certain vehicles equipped with Cummins Westport ISL-G engines, excessive engine crankcase pressure could cause the vent tube assembly elbow to detach from t… |
| 2008370 9 Oct 2008 | Other On certain vehicles, the extension pipes attached to the "Aftertreatment Regeneration Device" (ARD) may develop a hole, and possibly allow heat and flame to esc… |
| 2008001 7 Jan 2008 | Brakes Certain vehicles fail to comply with requirements of CMVSS 121 - Air Brake System. The air lines were incorrectly constructed with only four layers of extruded… |
| 2007415 18 Dec 2007 | Steering On certain trucks, an incorrectly manufactured steering gear sector shaft may cause the steering to "stick or bind". This could severely restrict the steering … |
| 2007090 20 Mar 2007 | Other On certain trucks, the axle housing may have been manufactured with steel that was out of specification (9.5mm thick instead of 11mm thick), which could result … |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
PACCAR Incorporated (PACCAR) is recalling certain 1990-2020 Peterbilt 320 and 520 vehicles built with specific amber rear turn signals. The turn signals may also light up with the stop/tail lights when the brakes are applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.
PACCAR IS RECALLING 60 MY 2008-2009 320 TRUCKS EQUIPPED WITH CATERPILLAR C13 DIESEL ENGINES. THE EXTENSION PIPES ATTACHED TO THE AFTERTREATMENT REGENERATION DEVICE (ARD) MAY DEVELOP A HOLE, AND HEAT AND FLAME MAY ESCAPE DURING A REGENERATION OF THE DIESEL PARTICULATE FILTER.
CERTAIN TRUCKS EQUIPPED WITH EATON SYNFLEX ECLIPSE BRAND EXTRUDED NYLON AIR BRAKE HOSE TUBING FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 106, "BRAKE HOSES." THE TUBING WAS MANUFACTURED WITH ONLY FOUR LAYERS OF NYLON MATERIAL, INSTEAD OF THE SPECIFIED FIVE LAYERS.
ON CERTAIN KENWORTH AND PETERBILT HEAVY DUTY TRUCKS EQUIPPED WITH TAS-85 TRW STEERING GEARS, THE INNER SURFACE OF THE OUTER SECTOR SHAFT TEETH OF THE STEERING GEARS MAY HAVE AN INCORRECT INVOLUTE PROFILE, WHICH MAY LEAD TO CHIPPING AND DAMAGE OF THE GEARING SYSTEM.
ON CERTAIN TRUCKS BUILT WITH CUMMINS ISM C876 ENGINES, THE ELECTRONIC CONTROL MODULE FAILS TO RECOGNIZE INPUTS OF THE VEHICLE ELECTRONIC CONTROL UNIT OR FROM A DRIVER ACTUATED DASH SWITCH THEREBY INCREASING THE RISK OF UNINTENDED (OR UNEXPECTED) ELEVATED EXHAUST TEMPERATURES.
CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES. THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
ON CERTAIN TRUCKS, THE AXLE HOUSINGS MAY HAVE BEEN MANUFACTURED WITH STEEL THAT WAS OUT OF SPECIFICATION WHICH COULD RESULT IN A FATIGUE FAILURE OVER TIME.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Peterbilt told its dealers about the 2008 Peterbilt 320: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10188550 | Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter. |
| 10177021 | Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information. |
| 10177019 | Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper. |
| 10176033 | Information only: Hendrickson Softek front axle maintenance intervals and requirements. |
| 10173212 | Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles. |
| 10173205 | Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage. |
| 10172036 | Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion. |
| 10168707 | Information only: Some model 320 and 520 vehicles built before 3/11/2019 may experience loss or loosening of doghouse insulation. Reference the procedure in the attachment section to properly remove and replace the insulation. |
| 10168703 | Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor. |
| 10163418 | Safety Recall: Vehicles fail to confirm with FMVSS/CMVSS No 108 Table 1-a requirements which requires 2 red stop lamps. Vehicles were equipped with additional amber stop lamps which may illuminate when the brake is applied, and may confuse other drivers. Resolution is to remove the amber stop lamps and associated wiring. |
| 10162392 | Information Only - Quick Reference Guide for Electric harness damage repairs. |
| 10159674 | Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion. |
| 10154733 | Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until Bendix introduces new version. |
| 10143649 | Information - Recommended Practices for Updating ESA Software |
| 10118723 | Fix-As-Fail: Repair for horizontal exhaust diffuser configurations with broken brackets or cracked diffuser. |
| 10033584 | CUMMINS ISX, OR CUMMINS ISM ENGINES EXPERIENCING A PREMATURE FAILURE OF THE FAN HUB BEARINGS. *KB |
| 10027645 | PETERBILT TRUCKS: THE ELECTRICAL SYSTEM MAY SHUT DOWN DUE TO A POWER SURGE. WHEN THIS OCCURS, THE GREEN LIGHT ON THE COMFORTCLASS CONTROL PANEL TURNS TO RED. *PE |
| 10026729 | PETERBILT TRUCKS SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. CERTAIN PETERBILT TRUCKS MANUFACTURED WITH UNDER TORQUED BRAKE ASSEMBLY MOUNTING BOLTS ON HENDRICKSON 8,000 LB PUSHER AXLES. CSC LETTER WAS RECEIVED. *PE |
| 10026567 | PETERBILT: TRUCKS BUILT WITH CUMMINS ISL ENGINES BETWEEN 1/16/08-6/10/08. DUE TO A MATERIAL ERROR, CERTAIN VEHICLES ORDERED WITH OPTIONAL C-BRAKE BY CUMMINS (OPTION CODE NUMBER 2812140) DID NOT RECEIVE A C-BRAKE ON THE ENGINE. *PE |
| 10025321 | PETERBILT SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. MODEL 320 LOW COOLANT SENSOR. THIS FIELD REPAIR NOTICE IS APPLICABLE TO CERTAIN PETERBILT MODEL 320 VEHICLES BUILT BETWEEN OCTOBER 4, 2007 AND JANUARY 24, 2008 WITH CATERPILLAR C13 ENGINES. CSC WAS RECEIVED. *PE |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Driveshaft separates from tractor
Horton Fan Hub Failures
NHTSA Office of Defects Investigation