Recalls in Canada
5 Transport Canada recalls for the 2004 Pierce Lance.
| 2013385 31 Oct 2013 | Structure On certain trucks, the trunnion ears on the cab tilt cylinders pivot may fail while the cab is being raised or lowered for vehicle servicing or maintenance. Thi… |
| 2011173 27 Apr 2011 | Engine On certain fire trucks, after repeated use with excessive force, the accelerator pedal arm may bend and cause the foot pedal to move closer to the floor. If th… |
| 2007340 22 Oct 2007 | Steering On certain fire trucks, the pitman arm may fracture under severe load caused by three loading conditions. In all cases, the front axle must be turned full left… |
| 2005313 13 Oct 2005 | Brakes On certain fire trucks, interference may occur between the aerial front axle interlock sensor bracket and the front air brake hose. This condition occurs durin… |
| 2005312 13 Oct 2005 | Seats And Restraints On certain fire trucks, the suspension seat restraining tethers are too long to ensure compliance with CMVSS 207. The seat tether restrains the seat during pul… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
PIERCE IS RECALLING CERTAIN MODEL YEAR 1999-2008 ARROW XT, DASH, LANCE, AND ENFORCER FIRE APPARATUS MANUFACTURED FROM JUNE 22, 1999, THROUGH MAY 12, 2008, AND EQUIPPED WITH AN ELECTRONIC ACCELERATOR PEDAL. AFTER REPEATED USE WITH EXCESSIVE FORCE, THE ACCELERATOR PEDAL ARM MAY BEND AND CAUSE THE PEDAL TO MOVE CLOSER TO THE FLOOR. IF THE PEDAL ARM BENDS FAR ENOUGH, THE PEDAL MAY CONTACT THE CAB FLOOR WITHOUT WARNING AND STICK IN THE FULL THROTTLE POSITION.
PIERCE IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2008 ARROW XT, LANCE, VELOCITY, ENFORCER, IMPEL, AND DASH CUSTOM FIRE APPARATUS VEHICLES MANUFACTURED FROM MAY 30, 1998 THROUGH NOVEMBER 25, 2008. THE STEERING GEAR BRACKET MAY FRACTURE AND BREAK. IF THIS OCCURS THE STEERING GEAR MAY DETACH FROM THE VEHICLE.
PIERCE IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2009 CUSTOM CONTENDER, DASH, ENFORCER, IMPEL, LANCE SABER, AND VELOCITY FIRE TRUCKS MANUFACTURED FROM FEBRUARY 20, 2003, THROUGH MARCH 27, 2009. THESE TRUCKS MAY BE EQUIPPED WITH DROP-DOWN FIRE HOSE TRAYS MOUNTED UNDER THE FRONT BUMPER. THE HOSE TRAY LATCH MAY ACCIDENTALLY OPEN WHILE THE VEHICLE IS IN MOTION.
ON CERTAIN FIRE TRUCKS, INTERFERENCE MAY OCCUR BETWEEN THE AERIAL FRONT AXLE INTERLOCK SENSOR BRACKET AND THE FRONT AIR BRAKE HOSE. THIS CONDITION OCCURS DURING FULL TURN STEERING AND FULL SUSPENSION JOUNCE COMPRESSION.
CERTAIN FIRE TRUCKS WITH COMMAND CABS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207,"SEATING SYSTEMS." THE RESCUE BODY OFFERINGS DO NOT MEET THE PULL TEST REQUIREMENTS. THE PEDESTAL SEAT WAS MOUNTED BY DRILLING AND TAPPING THE CAB OR BODY FLOOR.
CERTAIN FIRE TRUCKS EQUIPPED WITH HOLLAND/NEWAY AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTINGS MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION?S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE.
CERTAIN FIRE TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, 'SEATING SYSTEMS.' THE SEAT TETHER RESTRAINS THE SEAT DURING PULL TESTING AS THE SUSPENSION COMPONENTS ARE NOT DESIGNED TO RESTRAIN THE SEAT ON THEIR OWN. THE SUSPENSION SEAT TETHERS ARE TOO LONG.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Pierce told its dealers about the 2004 Pierce Lance: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11011818 | This bulletin is to support the dealer network when replacing a ASL 360 ECU that requires programming on the truck. |
| 11011817 | Software update for fault codes on Command Zone display: This software update may help remove ambiguity between active and inactive engine error codes shown on the Command Zone display. |
| 11008386 | All Roto Rays are warranted to the purchaser for twenty-four months from the date of service against defects in material or workmanship. During the warranty period products found to be defective will be repaired or replaced (at Roto Rays option) without charge. The defective light must be returned to Roto Rays, INC., 722 Park Ave., Herndon, VA 20170. The light will be returned to the purchaser prepaid. |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Williams Controls Accelerator Pedals
NHTSA Office of Defects Investigation