Compared with other years
NHTSA ODI complaints by model year
New York safety inspections
At its first New York inspection the 2009 Volvo VHD failed the safety check 2.25% of the time — 11% less often than the average 2009 passenger car (2.52%). Median odometer at inspection: 148,130 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Recalls in Canada
6 Transport Canada recalls for the 2009 Volvo VHD.
| 2018604 2 Nov 2018 | Lights And Instruments Certain vehicles equipped with a snowplow preparation kit may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Lightin… |
| 2016494 11 Oct 2016 | Steering On certain vehicles, a defect in the ball joint seals on the drag link could allow corrosion to form in the joint, leading to accelerated wear. This could resul… |
| 2013221 25 Jun 2013 | Other On certain vehicles, the secondary clutch disengagement switch may have been omitted during vehicle assembly or, in some instances, removed during servicing. A… |
| 2012356 18 Oct 2012 | Seats And Restraints Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard 210 – Seatbelt Assembly Anchorages. The weld used to secure the nut to the center-… |
| 2010433 6 Dec 2010 | Other On certain trucks equipped with an air release fifth wheel hitch, the inversion valve on the frame may be orientated where contaminants can enter the valve thro… |
| 2010347 12 Oct 2010 | Label On certain vehicles, the tire description may be incorrect on the certification label, which is a non-compliance to Canada Motor Vehicle Safety Standard 120 - T… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Volvo Trucks North America (Volvo) is recalling certain 2004-2019 Volvo VHD trucks equipped with snow plow lamp preparation kits. The snow plow headlights can be turned on without other exterior lights, and high beam indicator will not work when the snow plow high beams are on. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2016 VHD trucks manufactured from April 7, 2008, through December 9, 2015, equipped with USK non-greasable drag links. The ball joint seals may be compromised, which can allow water and other contaminants to enter the ball joints.
Volvo Trucks North America (Volvo) is recalling certain model year 2007-2014 VAH, VHD, VNL, VNM, and VT models. The affected vehicles were built without a redundant clutch disengagement switch. Without a redundant switch, a loss of signal from the brake air pressure switch can prevent the clutch from automatically disengaging when the brake is applied.
Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."
VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE.
VOLVO IS RECALLING CERTAIN MODEL YEAR 2008-2011 VHD, VNL, VNM, AS WELL AS 2008-2010 VT VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF PART 567, "CERTIFICATION." THE TIRE DESCRIPTION MAY BE INCORRECT ON THE VEHICLE'S CERTIFICATION LABEL.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What Volvo told its dealers about the 2009 Volvo VHD: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11006949 | CBR: On Volvo chassis with an I-Shift and Mack chassis with an mDRIVE transmission, there have been reports of complete shift assemblies and TECUs being replaced due to technicians being unable to pinpoint the source of the air leak. |
| 11002821 | CBR - Accelerator Pedal: Inspection/Instructions |
| 11000873 | CBR - 11 Liter Engines - Fuel In Oil. |
| 10251323 | CBR - Active "Set Park Brake" Message On Drivers Information Display (DID) |
| 10251319 | CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft. |
| 10248063 | CBR: 11L Engine - Air Conditioner (A/C) Line Damaged At Bracket - Model Year 2007 to Present. |
| 10241906 | TSB: Barksdale Leveling Valve, Leak Test |
| 10241904 | CBR: Volvo VHD & VN Models - Vehicle Wil Not Start, PTO Active Message Displayed In Cluster, PTO Light On When PTO Switch Is Turned Off |
| 10240244 | CBR: Programming Failure - Chassis With Cummins Engine And An Allison Transmission |
| 10238752 | CBR - Vehicles Equipped With Chalmers Suspension - Frame Bracket Hardware Loose or Interfering |
| 10237365 | CBR: Automated Manual Transmission ( AMT ) - Transmission Electronic Control Unit ( TECU ) MID130 PSID 29 FMI 7 / P10AE81 Fault Codes Being Generated |
| 10237364 | CBR: Automated Manual Transmission (AMT) Transmission Kickdown Mode |
| 10237360 | CBR: Diagnostic Trouble Code (DTC) P215A-64, Fault Code SPN 84 FMI 19 |
| 10235293 | CBR: Volvo VHD Models - Allison Reduced Engine Load At A Stop (RELS) Diagnostic Trouble Code P071A Or P07CE - Non-Split/Drop Box PTO. VHD chassis may experience Diagnostic Trouble Code P071A or P07CE along with symptoms of no reduced engine load (RELS) when coming to a stop and/or the transmission going into 4th gear lock up when applying the service brake. |
| 10235288 | CBR: Volvo Chassis - Timing Gear Plate Repair. This solution provides supplementary information to be used when installing a Timing Gear Plate with Integrated Seal. |
| 10235279 | CBR: Volvo On-Highway Vehicles - Bendix ABS Fault SPN 807 FMI 13 Blink code 19-4. The new Central Pressure Control (CPC) system has changed the way that the ABS chuff test is performed. |
| 10232592 | Flywheel Housing Thread Repair |
| 10232589 | Instrument Cluster Programming - Programming Fails Or Errors Display When Replacing An Instrument Cluster With A Newer Part Number (Conversion Kit) - US04 To US10 Chassis (9-Pin Diagnostic Connector) |
| 10225705 | Volvo Chassis - D12C, D12D, D11F, D13F, D16D, D16F Engines - Copper Injector Sleeves, Replacement Procedure And Information ( Flat Tip Injectors ) - US04 To US07 Emissions |
| 10225704 | Volvo Chassis - ( AMT, I-Shift ) - Transmission Grinding When Downshifting ; Range Synchronizer (Synchro) Timing Procedure - US07 And Newer |
| 10222270 | TSB-Charge Air Cooler t-clamp install. |
| 10219421 | Engine Control Module (EMS) Software (MSW) Information August 2022; Improvement List (Change Log) - US21+OBD22 (13L VGT, TC) And US17+OBD22 (11L) Emissions |
| 10219302 | Part information for AMT input shaft repair kits and the shim kit that is required for repair. |
| 10215308 | Volvo Chassis - Equipped with An Automated Manual Transmission (AMT, iShift) - SNV 19-002 - AMT Oil Filter Housing Corrosion |
| 10215306 | Volvo Chassis - Drag Link Inspection And Replacement Criteria |
NHTSA manufacturer communications (public domain)
NHTSA investigations
Discrepancies in Required CFR Reporting
Stop Lamp Switch Signal
NHTSA Office of Defects Investigation