Compared with other years
NHTSA ODI complaints by model year
New York safety inspections
At its first New York inspection the 2016 International ProStar failed the safety check 0.68% of the time — 66% less often than the average 2016 passenger car (1.97%). Median odometer at inspection: 341,531 miles.
NY DMV Vehicle Inspections (vezn-fmmk), initial inspections since Aug 2021 · how we count
Recalls in Canada
7 Transport Canada recalls for the 2016 International ProStar.
| 2023293 18 May 2023 | Lights And Instruments Issue: On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulat… |
| 2017456 20 Sept 2017 | Steering On certain vehicles, the castellated nut and cotter pin on the steer axle may not have been tightened to specification. This could cause the tie rod to become l… |
| 2017140 14 Mar 2017 | Brakes On certain vehicles, the air dryer mounting bracket may fracture and cause the air dryer to separate the frame. This could potentially cause the air lines to s… |
| 2016373 26 Jul 2016 | Electrical On certain vehicles equipped with the battery box mounted between the frame rails, the battery mounted cube fuse terminal connection could potentially break. A … |
| 2015448 5 Oct 2015 | Engine On certain vehicles, the Engine Control Module (ECM) may develop an internal electrical short circuit that could blow a fuse in the ECM's electrical supply circ… |
| 2015214 20 May 2015 | Structure On certain vehicles, the weld joint between the upper stack tail pipe and the vertical exhaust pipe may crack and allow the exhaust pipe to separate from the ve… |
| 2015120 18 Mar 2015 | Brakes On certain vehicles, brake chamber diaphragm(s) may not be properly seated. This could lead to brake drag, causing brake overheating or unintended spring brake … |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013, 2016 International LoneStar, 2011-2012, 2016 International 4400, 2017-2024 International LT, 2018-2024 International RH, 2019-2021 International LS, 2019-2024 International MV vehicles. The back-up lights offer low visibility when the vehicle is in reverse and bobtail mode. Also, the vehicles have not been equipped with additional unobstructed back-up lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Navistar, Inc. (Navistar) is recalling certain 2000-2001 International 4700, 2000-2002 4900, 2001-2003 8100 (TranStar) and 9100I, 2002-2003, 2005, 2007-2009, 2012-2014 and 2016-2018 DuraStar, 2012 and 2014-2017 ProStar, 2014-2015 TerraStar, and 2018 LT trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Navistar, Inc. (Navistar) is recalling certain 2016 International DuraStar, LoneStar, ProStar, TerraStar, TranStar, WorkStar, 9900i, and IC Bus HC vehicles equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
Navistar Inc. (Navistar) is recalling certain 2016-2018 International LT, 2016-2017 International ProStar, 2017-2018 International LoneStar and International RH heavy diesel trucks. The air dryer mounting bracket may fracture, causing air system leaks or a loss of air pressure to the brake system.
Navistar, Inc. (Navistar) is recalling certain model year 2014-2017 International ProStar trucks manufactured June 11, 2013, through May 19, 2016. In the affected vehicles, the connection for the cube fuse terminal may break resulting in a total loss of power to the cab and an unexpected engine stall.
Navistar, Inc. (Navistar) is recalling certain model year 2016 International ProStar trucks manufactured January 5, 2015, to January 7, 2015, and 2016 International TranStar trucks manufactured on January 6, 2015, and equipped with certain Eaton Fuller FR-Series 10-speed manual transmissions. When the transmission shift lever is moved from reverse to neutral, the reverse gear may stay engaged. When the transmission shift lever is moved from reverse to a forward gear position, the transmission may mechanically lock because both the reverse gear and forward gear are simultaneously engaged.
Navistar Inc. (Navistar) is recalling certain model year 2016 International ProStar trucks manufactured August 5, 2015, to August 14, 2015, DuraStar trucks manufactured August 7, 2015, to August 13, 2015, Paystar trucks manufactured August 11, 2015, to August 14, 2015, and LoneStar trucks manufactured August 10, 2015, to August 14, 2015. In the affected vehicles, the Engine Control Module (ECM) may short circuit, causing the engine to stall without warning.
Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900, DuraStar, LoneStar, PayStar, ProStar, WorkStar and 2015 International TranStar and IC Bus CE vehicles equipped with a Haldex air braking system. The affected brake actuators may have been manufactured with an incomplete attachment of the internal rubber diaphragm to the actuation mechanism. This could cause dragging or overheated brakes.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What International told its dealers about the 2016 International ProStar: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 11010428 | This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean. |
| 10253979 | This document is to guide users to eliminate brake pedal rattle noise. |
| 10253970 | This document details the procedure that must be followed to ensure proper alternator troubleshooting. |
| 10253960 | This document covers battery diagnostics, maintenance and storage requirement. |
| 10251414 | Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine. |
| 10251409 | Suggested alignment target values when performing a vehicle axle alignment. |
| 10246231 | J1939 Data Link Source Address Information |
| 10244926 | Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present. |
| 10243610 | How to request a horsepower quote; all International and Cummins engines |
| 10243596 | General Wheel Speed Sensor Troubleshooting |
| 10243595 | Diagnosis of chassis wander complaints. |
| 10243594 | Certain International N13 engines may be noncompliant to the required On Board Diagnostics (OBD) Monitor, Manufacturers Self-Test (MST) for over-boost, Exhaust Gas Recirculation (EGR) low flow, and EGR high flow monitors. Under certain conditions, this noncompliance may result in the failure to detect an increase in regulated air pollutants. |
| 10241555 | J1939 Data Link Source Address Information |
| 10241554 | J1939 Data Link Troubleshooting |
| 10240193 | Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines |
| 10237468 | New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines |
| 10236042 | New Air compressor Incorporates an oil feed dowel O-ring; only models built with MaxxForce 11/13, N13, or A26 Engines |
| 10234021 | Rebuilding cylinder heads on certain EPA 2010 MaxxForce 11/13, N13, and A26 Engines |
| 10234015 | Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines |
| 10234000 | Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions |
| 10232616 | Rebuilding Cylinder Heads on Certain International MaxxForce 11/13 engines and all International N13 and A26 engines |
| 10231068 | QLS Emergency ECM Calibration; only models equipped with Cummins B6.7, X15, L9, or International A26 engines |
| 10227455 | J1939 Data link source address information |
| 10222490 | Pico Scope CCOS (Crankcase Separator Test) |
| 10219330 | PicoScope Test One Channel RCT |
NHTSA manufacturer communications (public domain)