Recalls in Canada
6 Transport Canada recalls for the 2010 MCI D4500.
| 2026007 15 Jan 2026 | Visual System Issue: On certain buses, the wrong glass may have been installed on the lower front entry door panel. As a result, the glass may not meet certain requirements… |
| 2014236 19 Jun 2014 | Electrical Certain coaches previously repaired as part of recall 2012173 may require additional modifications. The power draw from the LED interior lights may exceed the d… |
| 2012173 30 May 2012 | Electrical On certain coaches, the power draw from the LED interior lights may exceed the design limits of the electrical circuit. This could allow certain components to … |
| 2010153 11 May 2010 | Wheels On certain coaches, the front and/or tag axle assemblies may have been installed with improper torque applied to the hub/rotor/wheel adapter bolts. Reduced bol… |
| 2010082 22 Mar 2010 | Other On certain vehicles equipped with a Ricon F9 series cassette wheelchair lift, an improperly manufactured switch in the wheelchair lift restraint buckle may allo… |
| 2010067 5 Mar 2010 | Other On certain vehicles, the Ricon wheelchair lift located in baggage bay #2 could become disengaged from a locked position and slide freely. As a secondary mode o… |
Transport Canada Vehicle Recalls Database · Contains information licensed under the Open Government Licence – Canada
Recalls
Motor Coach Industries (MCI) is recalling certain 102DL3, 102D3, MC12PTV, E4500, D4000, 102D3ISTV, D4500, J4500, D4000ISTV, D4005, D4505, and J3500 transit buses. Please refer to MCI's recall report for specific model year information. The front door lower curb view glazing material is incorrect. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."
Motor Coach Industries (MCI) is recalling certain model year 2011-2013 and 2015 J4500 coaches manufactured November 18, 2011, to July 10, 2015, 2011-2012 and 2014-2015 D4000 coaches manufactured manufactured September 24, 2010, to September 5, 2015, 2011-2013 and 2015-2016 D4005 coaches manufactured January 17, 2011, to November 23, 2015, 2012-2014 and 2016 D4000ISTV coaches manufactured July 18, 2012, to December 2, 2015, 2010-2016 D4500 coaches manufactured April 15, 2010, to December 18, 2015 and 2011-2016 D4505 coaches manufactured December 15, 2010, to December 4, 2015. The affected buses are equipped with certain Recaro Ergo-M Commercial Bus Driver Seats that have J-Brackets that may be missing welds which could allow the seat belt anchorage assembly to separate from the J-Bracket.
Motor Coach Industries, Inc (MCI) is recalling certain model year 2009-2011 D4000 and D4500 and 2010 D4505 motor coaches equipped with LED lights interior lights powered by either a Vansco or IO multiplex system. Due to the excessive power draw of the LED lights, heat may build up at the fuse block and connector, causing the components to melt.
Motor Coach Industries (MCI) is recalling certain model year 2000-2012 D, E, G and J series coaches manufactured January 2000 through June 2011 and equipped with Sure Power battery equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
MOTOR COACH INDUSTRIES, INC (MCI) IS RECALLING CERTAIN MODEL YEAR 2009-2011 D4000, D4500 AND 2010 D4505 MOTOR COACHES EQUIPPED WITH LED LIGHTS INTERIOR LIGHTS AND POWERED BY EITHER A VANSCO OR IO MULTIPLEX SYSTEM. DUE TO EXCESSIVE POWER DRAW OF THE LED LIGHTS, HEAT MAY BUILD UP AT THE FUSE BLOCK AND CONNECTOR, CAUSING COMPONENTS TO MELT.
MOTOR COACH INDUSTRIES (MCI) IS RECALLING CERTAIN MODEL YEAR 2003, AND 2007-2012 E AND J MODELS ALONG WITH MODEL YEAR 2007-2012 D4000, D4005, D4500, D4505, D4000ISTV MOTOR COACHES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) MODULES, MANUFACTURED FROM OCTOBER 2002, THROUGH OCTOBER 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.
MCI IS RECALLING CERTAIN MODEL YEAR 2010-2011 D4500, D4505, AND D4000 MOTOR COACHES. THE AFFECTED PULLEY COVERS MAY LACK CERTAIN WELDS REQUIRED TO KEEP THE COVERS ATTACHED TO THE COACH STRUCTURE.
MCI IS RECALLING CERTAIN MODEL YEAR 2010 D4000, D4005, D4500, D4505, E4500, AND J4500 MODEL MOTOR COACHES MANUFACTURED FROM SEPTEMBER 2009 THROUGH MAY 2010, EQUIPPED WITH ARVINMERITOR FRONT AND TAG AXLE ASSEMBLIES. THE SUSPECT AXLES MAY HAVE HAD IMPROPER TORQUE APPLIED TO THE HUB/ROTOR/WHEEL ADAPTER BOLTS DURING THE ASSEMBLY PROCESS. REDUCED BOLT TORQUE COULD LEAD TO VIBRATION LOOSENING OF THE BOLT.
MCI HAS NOTIFIED NHTSA OF A DEFECT IN CERTAIN MODEL YEAR 2009 D4000 AND MODEL YEAR 2008-2010 D4500 AND D4505 MOTOR COACHES FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.
MCI IS RECALLING CERTAIN MODEL YEAR 2000-2009 D4000, MODEL YEAR 2001-2010 D4500 AND MODEL YEAR 2005-2007 D4505 COACHES EQUIPPED WITH RICON WHEELCHAIR LIFT (WCL) AND A CASSETTE-TYPE WCL COMPARTMENT DOOR. THE WHEELCHAIR LIFT MAY BECOME DISENGAGED FROM A LOCKED POSITION AND SLIDE UNRESTRAINED ON ITS ROLLERS IN THE STORAGE STRUCTURE, POTENTIALLY BREAKING THROUGH THE CASSETTE DOOR AND EXTENDING BEYOND THE OUTSIDE OF THE DOOR WHEN THE COACH IS IN MOTION, PARTICULARLY WHEN THE COACH IS MAKING A LEFT TURN.
Whether a recall was fixed on a particular car is known only to the manufacturer: check the VIN at nhtsa.gov/recalls.
NHTSA recalls · summaries in NHTSA's own words
Service bulletins
What MCI told its dealers about the 2010 MCI D4500: known faults, fixes and updates.
| Bulletin | Summary |
|---|---|
| 10213033 | Technical Service Information Bulletin describing the replacement of seating backrest attachment hardware with the addition of a mechanical lock nut on specifically equipped buses manufactured prior to model year 2020. |
| 10206198 | This Technical Service Information Bulletin (TSIB) describes an update from Meritor for the bolt torque application requirements on hub-to-rotor bolts for the front, drive and tag axles, on specific coaches equipped with Meritor EX225 disc brakes, on either Conventional, PreSet or Unitized Wheel-End hubs. |
| 10203367 | Motor Coach Industries (MCI) has received field reports of the alternator bracket on 2010 and 2013 Cummins ISX engine exhibi;ting signs of fatigue and cracking. MCI is instructing customers operating a D or J4500 serues ciacg eqkyuooed wutg a 2010 or 2013 Cummins ISX engine to perform the visual inspection outlined in this Service Information bulletin. |
| 10180805 | This Service Bulletin provides a checklist of actions to perform on a daily, weekly and monthly basis for parked coaches before they are considered ready for driving. |
| 10167366 | This Service Bulletin informs owners of the procedure to clean the batteries and reapply corrosion inhibitor every 6000 miles or 3 months, whichever first occurs. |
| 10119151 | This Service Bulletin informs affected customers that due to the Actia's module internal circuit characteristic the potential may exist in which both the high side and low side output of power management module (PMM)1 may be active at the same time for a very brief time. This may result in an electrical short on the low side output and intermittent loss of the ignition signal on model year 2010-2012 MCI D model coaches, and that MCI will remedy the affected coaches at no cost to the customers. |
| 10119140 | This Service Bulletin informs affected customers that MCI was notified by Allison Transmission that it has released Field Action Letter 2012FA03 that addresses the need for replacement of the Dual Power Inverter Module 2 (DPIM2) on model year 2010-2011 MCI D4500 model coaches. This program is being performed only by authorized Allison Transmission dealers, therefore, all parts and labor required for this program will be provided by Allison Transmission. |
| 10056071 | MOTOR COACH IND. (MCI): TO CORRECT AN ACTIVE FAULT CODE (2311), EXPERIENCED IN THE ENGINE, A NEW CALIBRATION ECM IS BEING INSTALLED. *PE |
| 10056066 | MOTOR COACH INDUSTRIES (MCI): RED 185 DUROMETER POLYURETHANE BUSHINGS WERE REPLACED WITH 288 POLYURETHANE BUSHINGS IN SHOCK ABSORBERS THAT IN COLD TEMPERATURES, WILL FAIL, CAUSING ABSORBER STUD TO BREAK, AT BUSHING, AND COACH IS NOT OPERATIONAL DUE TO RISK OF DAMAGE TO SUSPENSION COMPONENT. MODEL D SERIES. *PE |
| 10038824 | MOTOR COACH INDUDSTRIES: INFORMATION ON REPLACING THE COOLANT PUMP THAT MAY HAVE A PROBLEM. *RM |
| 10038195 | MOTOR COACH INDUSTRIES SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THERE MAY BE A HARSH DOWNSHIFT, RPM FLARE, OR THE TRANSMISSION MAY LOCK. *RM |
NHTSA manufacturer communications (public domain)
NHTSA investigations
MCI Drive Shaft Safety Loop Failures
MCI Driveshaft Safety Loop Failures
NHTSA Office of Defects Investigation