2005 Freightliner Business Class M2

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2004 THROUGH 2008 HEAVY TRUCKS MANUFACTURED FROM JULY 11, 2003, THROUGH SEPTEMBER 28, 2007, EQUIPPED WITH EPA04 MODEL MBE4000 ENGINES BUILT WITH PLASTIC LOW PRESSURE FUEL LINES AND FUEL FILTERS MOUNTED NEAR THE CENTER OF THE ENGINE ON THE LEFT-HAND SIDE. THE PLASTIC LOW PRESSURE FUEL LINE BETWEEN ENGINE MOUNTED FUEL FILTER AND ENGINE BLOCK MAY DEVELOP A SUBSTANTIAL DIESEL FUEL LEAK.

DTNA IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2011 FREIGHTLINER BUSINESS CLASS C2, FCCC B2 CHASSIS, S2 CHASSIS, AND MC CHASSIS MANUFACTURED BEGINNING JANUARY 19, 2005 THROUGH APRIL 16, 2010. THE STOP LAMPS MAY BE INTERMITTENT DURING LIGHT BRAKE APPLICATIONS.

DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING 24,650 SCHOOL AND NON-SCHOOL BUSES, MOTOR HOME CHASSIS, AND TRUCKS MANUFACTURED FROM MARCH 9, 2004 THROUGH AUGUST 18, 2006, EQUIPPED WITH EPA04 CERTIFIED MBE900 ENGINES, MANUFACTURED BY DETROIT DIESEL BETWEEN MARCH 1, 2004, AND JULY 31, 2006. THE HIGH PRESSURE FUEL LINES AND TRANSFER TUBES MAY FATIGUE AND FRACTURE.

DAIMLER TRUCKS IS RECALLING 28,764 MY 2001 THROUGH 2008 FCCC B2 AND FS65 SCHOOL BUS CHASSIS, FCCC FB65 CONVENTIONAL BUSES, AND STERLING ACTERRA, FREIGHTLINER FLN, AND BUSINESS CLASS M2 HEAVY TRUCKS, BUILT FROM JANUARY 26, 2000, THROUGH MARCH 24, 2008, MANUFACTURED WITH ARVINMERITOR OR AXLE ALLIANCE COMPANY 6,000 THROUGH 8,000 POUND FRONT AXLES UTILIZING A FOUR PIECE SPINDLE-NUT SET. THESE AXLE ASSEMBLIES MAY HAVE BEEN PRODUCED WITH A THIN SPINDLE NUT WHICH MAY LEAD TO INCORRECT END PLAY, CONE SPIN, EXCESSIVE HEAT, DEGRADATION OF LUBRICATION, WEAR OF THE SPINDLE NUT AND BEARING JOURNAL, OIL CONTAMINATION WITH METAL SHAVINGS, AND PREMATURE BEARING FAILURE.

DAIMLER TRUCKS IS RECALLING 62,000 MY 2005-2007 FREIGHTLINER BUSINESS CLASS, CENTURY CLASS, COLUMBIA, CORONADO, FLD, CLASSIC, STERLING A-LINE, L-LINE, AND WESTERN STAR 4900 TRUCKS. A FRACTURED FUEL LINE COULD LEAK DIESEL FUEL.

CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY.

ON CERTAIN TRUCKS EQUIPPED WITH FONTAINE MODIFICATION RIGHT HAND STEERING CONTROL AND EQUIPPED WITH SIT DOWN DUAL DRIVE CONVERSIONS, THE PINCH BOLT THAT SECURES THE LOWER STEERING SHAFT CONNECTION TO THE LH MITER BOX MAY HAVE BEEN IMPROPERLY TORQUED CAUSING THE BOLTS TO FALL OUT.

CERTAIN 2004 AND 2005 THOMAS BUILT C2 SCHOOL BUSES AND FREIGHTLINER BUSINESS CLASS M2 HEAVY TRUCKS MANUFACTURED BETWEEN JUNE 2004 AND MARCH 2005. THE ANCHOR/PIVOT BOLT SUPPLIED WITH THE PARK BRAKE IS DEFECTIVE AND COULD FATIGUE FRACTURE PREMATURELY, RESULTING IN THE PARK BRAKE FAILING TO APPLY.

CERTAIN 2005 THOMAS BUILT FS-65 AND C-2 SCHOOL BUSES AND 2005 FREIGHTLINER ARGOSY, COLUMBIA, CENTURY ST, AND M2 BUSINESS CLASS TRUCKS MANUFACTURED BETWEEN JUNE 4 AND JULY 8, 2005. THE SPINDLES IN THE REAR AXLE HOUSING WERE OVERHEATED DURING THE HEAT TREATMENT PROCESS. INCORRECTLY HEAT TREATED SPINDLES COULD RESULT IN A FRACTURE OF THE SPINDLE.

Stop Lamps Intermittent

FRONT WHEEL SEPARATION